• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.235-240
• /
• 2005

This paper presents a dual band circularly polarized microstrip patch antenna. The antenna consists of two corner truncated patches implemented in one plane and single feed point. The input signal is directly excited to the patch 2 and the patch 1 is fed from patch 2 by coupling between two patches. The antenna is operated at 900 MHz and 2.45 GHz bands and has the right hand circularly polarized radiation pattern at all. The measured gains of the antenna are 2.95 dBic at 900 MHz band and 4.6 dBic at 2.45 GHz band.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.12
• /
• pp.78-83
• /
• 2010

In this paper, a novel dual-band power amplifier using metamaterials has been realized with one RF GaN HEMT diffusion metal-oxide-semiconductor field effect transistor. The CRLH TL can lead to metamaterial transmission line with the dual-band tuning capability. The dual-band operation of the CRLH TL is achieved by the frequency offset and the nonlinear phase slope of the CRLH TL for the matching network of the power amplifier. We have managed only the second- and third-harmonics to obtain the high efficiency with the CRLH TL in dual-band. Also, the proposed power amplifier has been realized by using the harmonic control circuit for not only the output matching network, but also the input matching network for better efficiency. Two operating frequencies are chosen at 900 MHz and 2140 MHz in this work. The measured results show that the output power of 39.83 dBm and 35.17 dBm was obtained at 900 MHz and 2140 MHz, respectively. At this point, we have obtained the power-added efficiency (PAE) and IMD of 60.2 %, -23.17dBc and 67.3 %, -25.67dBc at two operation frequencies, respectively.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.163-166
• /
• 2005

Multilayer LTCC technology enables RF modules to be reduced dramatically by taking advantage of the three dimension flexibility. Compared to a conventional two dimensional PCB, LTCC allows higher density, reduced size, and lower cost. In this research, BPF based on LTCC for 900MHz ZigBee application was implemented which can replace SAW filter with using the material of the Dupont9599's dielectric constant 7.8. And distributed baud pass filter for 900MHz ZigBee system applications is presented. Using resonator stripline and capacitance, 2nd order band pass filter was designed. Adjusting resonator's length and capacitance is easy to tune at accurate center frequency by shifting band because ZigBee system is using narrow bandwidth, $902MHz^{\sim}928MHz$. Also resonator has no limitation in space, so reducing size is possibile. Designed filter had I.L. 2.8dB at 915MHz and attenuation at 815MHz, 1015MHz was 16dB, 15dB, respectively. Therefore, the sharpe cut-off and good insertion loss for ZigBee system application.

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.432-435
• /
• 2007

In this paper, a dual band microstrip patch Antenna is designed for RFID Application. The antenna shows a good performance at the frequencies, 900MHz and 2.45GHz for the radiation characteristics and input impedance matching, as well. The reflection factor is lower than -25dB and a good directivity higher than 5dB is achieved for both frequency.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.2 no.3
• /
• pp.359-365
• /
• 1998

The portable two way radio telephone amongst GMDSS equipment in the vessel is very important portable wireless one for search and rescue in distress situation. Although the portable two way radio telephone must be equipped with in the vessel by IMO & RR, other kinds of wireless tranceivers are widely used to communicate with crew members who are separately appointed at bridge forecastle and poop in leaving or arriving at the port, passing through a narrow canal or voyaging in the foggy weather, Most of those wireless tranceivers except portable two way radio telephone are allocated at 27MHz band with PTT simplex system that makes crew members difficult to work effectively in the vessel. In this research 900MHz band FDD(frequency duplex division) tranceiver system is studied to help crew members in the vessel to communicate with themselves freely and to work easily meanwhile with simple operation. 900MHz band FDD tranceiver system uses one chip FM frontend IC to realize the miniaturization and downsizing of tranceiver and small size head set attached to helmet. The credibility of this research's result is highly evaluated by circuit analysis with computer aided simulation, and partly modified 900MHz band cordless phone circuit.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1998.05a
• /
• pp.365-370
• /
• 1998

The portable two way radio telephone amongst GMDSS equipment in the vessel is very important portable wireless one for search and rescue in distress situation. Although the portable two way radio telephone must be equipped with in the vessel by IMO RR, other kinds of wireless tranceivers are widely used to communicate with crew members who are separately appointed at bridge forecastle and poop in leaving or arriving at the port, passing through a narrow canal or voyaging in the foggy weather. Most of those wireless tranceivers except portable two way radio telephone are allocated at 27MHz band with PTT simplex system that makes crew members difficult to work effectively in the vessel. In this research 900MHz band FDD(frequency duplex division) tranceiver system is studied to help crew members in the vessel to communicate with themselves freely and to work easily meanwhile with simple operation. 900MHz band FDD tranceiver system uses one chip FM frontend IC to realize the miniaturization and downsizing of tranceiver and small size head set attached to helmet. The credibility of this research's result is highly evaluated by circuit analysis with computer aided simulation. and partly modified 900MHz band cordless phone circuit.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.19 no.2
• /
• pp.345-354
• /
• 2024

In this paper, we propose a triple band WLAN antenna for Wi-Fi 6E band with DGS. The proposed antenna has the characteristics required frequency band and bandwidth by considering the interconnection of two strip lines and three areas on the ground place. The total substrate size is 31 mm (W) × 50 mm (L), thickness (h) 1.6 mm, and the dielectric constant is 4.4, which is made of 22 mm (W₆ + W₄ + W₅) × 43mm (L₁ + L₂ + L₃ + L₅) antenna size on the FR-4 substrate. From the fabrication and measurement results, bandwidths of 340 MHz (1.465 to 1.805 GHz) for 900 MHz band, 480 MHz (2.155 to 2.635 GHz) for 2.4 GHz band and 1950 MHz (4.975 to 6.925 GHz) for 5.0/6.0 GHz band were obtained on the basis of -10 dB. Also, gain and radiation pattern characteristics are measured and shown in the frequency triple band as required.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.539-542
• /
• 2005

In this paper, we propose a wireless data access system, which used direct sequence spread spectrum method and the ISM band with 900MHz radio frequency. By applying bi-directional transmission between wireless transmitter and receiver, it can be effectively connected with any kinds of RF-ID with 900MHz ISM band. Therefore it could economically be used as peripheral equipments for RF-ID system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.2
• /
• pp.215-220
• /
• 2009

LR-WPAN(Low-Rate Wireless Personal Area Network) hewn as IEEE 802.15.4 is considered as one of the most suitable specifications published until now to accomplish USN(Ubiquitous Sensor Network). In this paper we simulate interference effects to other systems if LR-WPAN will be used in 900MHz. In considering the current usage situation of 900MHz frequency band, we can think LR-WPAN shares the frequency band of $908.5{\sim}914MHz$ assigned for RFID/USN. The simulation results of the case of LR-WPAN and RFID/USN sharing the frequency band show that the probability of interference of LR-WPAN to CT1 and RFID is 2.5% and 2.1%, respectively. In order to avoid interference effects to public communications, simulations results show that the protection distance of about loom is needed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.125-128
• /
• 2008

In this paper, a stand-type planar antenna of 900MHz RFID band is designed and fabricated. As the proposed antenna is stand-type use of air permittivity, Bandwidth used ground height at rectangle patch structure and coaxial feed line is widen. Also wideband width can solve problem that RFID tag attached to things happens frequency shift keying phenomenon by liquid, special metal, temperature, humidity etc. Bandwidth of fabricated antenna to VSWR less than 2 is satisfied 11.9% at $890MHz{\sim}1000MHz$. And proposed antenna is circular polarization antenna of operating characteristics that axial ratio is less than 2 and gain is 6dBi.