• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 봄 학술발표회 논문집
• /
• pp.153-160
• /
• 2003

Nonlinear finite element analysis of reinforced concrete panels subjected to biaxial tensile loads are carried out by using a 9-node assumed strain shell element. The present study mainly focuses on the performance evaluation of material models such as cracking criteria, tension stiffening model and steel model in the membrane energy dominant situation. From numerical results, the exponential form of tension stiffening model together with the use of average yield stress model for the steel embedded in the concrete performs well in the panel analysis under biaxial tensile loading condition and it produces a good agreement with experiment results. Finally, the present results are provided as a benchmark test for reinforced concrete panel structures.

• Coupled systems mechanics
• /
• 제9권2호
• /
• pp.125-145
• /
• 2020

In this paper, we present a 3D thermo-hydro-mechanical coupled discrete beam lattice model of structure built of the nonisothermal saturated poro-plastic medium subjected to mechanical loads and nonstationary heat transfer conditions. The proposed model is based on Voronoi cell representation of the domain with cohesive links represented as inelastic Timoshenko beam finite elements enhanced with additional kinematics in terms of embedded strong discontinuities in axial and both transverse directions. The enhanced Timoshenko beam finite element is capable of modeling crack formation in mode I, mode II and mode III. Mode I relates to crack opening, mode II relates to in-plane crack sliding, and mode III relates to the out-of-plane shear sliding. The pore fluid flow and heat flow in the proposed model are governed by Darcy's law and Fourier's law for heat conduction, respectively. The pore pressure field and temperature field are approximated with linear tetrahedral finite elements. By exploiting nodal point quadrature rule for numerical integration on tetrahedral finite elements and duality property between Voronoi diagram and Delaunay tetrahedralization, the numerical implementation of the coupling results with additional pore pressure and temperature degrees of freedom placed at each node of a Timoshenko beam finite element. The results of several numerical simulations are presented and discussed.

• Journal of Gastric Cancer
• /
• 제8권4호
• /
• pp.182-188
• /
• 2008

목적: 인체 내 여러 조직에서 상피세포의 분화 및 증식에 중요한 역할을 담당한다고 알려진 retinoic acid (RA)와 여러 유전자들에서 전사조절인자로 성장관여 유전자들의 활성화에 관여하며 세포증식 및 분화에 매우 중요한 세포내 조절인자인 CREB의 발현정도와 위선암종간의 상호 연관성 및 병리학적 인자들과의 관계를 관찰하였다. 대상 및 방법: 중앙대학교 의과대학 용산병원에서 1998년 1월부터 2007년 12월까지 위절제술을 시행 받고 위선암종으로 진단받은 환자의 위조직표본 중 보존상태가 양호한 파라핀 포매괴 150예를 연구대상으로 조직 표본에서 면역 조직화학적 염색을 통해 관찰하였다. 결과: 1. RAR의 발현은 장형 위선암종(72.2%)에서 미만형 위선암종(40.5%)보다 높게 나타났으며(P<0.01), 림프절 전이가 있는 경우(74.7%)가 림프절 전이가 없는 경우(49.2%)보다 의미 있는 발현양상을 나타냈다(P<0.01). 2. cAMP response element binding protein (CREB)의 발현은 장형 위선암종(69.4%)에서 미만형 위선암종(38.1%)보다 높게 나타났으며(P<0.01), 림프절 전이가 있는 경우(71.1%)가 림프절 전이가 없는 경우(47.8%)보다 높은 발현양상을 나타냈다(P<0.01). 3. 총 150예의 위선암종에서 RAR은 63.3% (95/150), CREB은 60.7%(91/150)에서 발현을 나타냈다(P<0.01). 결론: 이상의 결과로 RAR과 CREB은 조직학적 분화도 및 종양의 전이와 관련이 있고, 이들의 발현이 장형 위선암종에서의 생물학적 악성도에 관한 예후인자로서 관련이 있으나 이들의 발현이 위선암종에 미치는 생물학적 기전에 대한 추가 연구가 필요하다.

• 한국정밀공학회지
• /
• 제25권9호
• /
• pp.95-102
• /
• 2008

A miniature metal bellows is used to minimize the excessive flow of the cryogenic gas in Joule-Thomson micro cryocooler. It is made of metal alloy and its geometry is axisymmetric. The bellows is filled with high pressure gas. It contracts or expands in the axial direction for a wide change of temperature, because the pressure and volume inside the bellows must be satisfied with state equation of the gas. Therefore, in order to design the bellows in Joule-Thomson micro-cryocooler, it is important to evaluate deformation of the bellows under internal pressure exactly. Considering geometric nonlinearity, deformations analysis of the bellows were obtained by a commercial finite element code ANSYS, The bellows was modeled by 3-node axisymmetric shell elements with reduced integration. Experiments were also performed to prove the validity of proposed numerical analysis. The results by numerical analysis and experiments were shown in good agreements.

• 한국전산구조공학회논문집
• /
• 제13권2호
• /
• pp.221-230
• /
• 2000

스위프 기하학적 모델은 곡선, 면 또는 입방체를 주어진 경로를 따라 이동시킴으로써 기하학적 모델을 생성하는 기법이다. 따라서 스위핑을 사용하면 프리즘 쉘의 곡면을 쉽게 정의할 수 있다. 본 논문은 스위프 기하학적 모델을 프리즘 쉘의 최적화에 적용하는 절차에 대하여 기술하였다. 제시한 스위프 기하학적 모델을 유한요소법과 융합하였고 프리즘 쉘의 반응을 계산하기 위해 9절점 퇴화쉘요소를 채용하였다. 본 연구에서 제시한 최적화과정을 증명하기 위하여 수치예제를 풀어 보았다. 수치예제를 통하여 제시한 스위프 기하학적 모델이 많은 종류의 프리즘 쉘을 최적화하는데 효율적이고 신뢰적인 방법인 것으로 나타났다.

• 한국해양공학회지
• /
• 제9권2호
• /
• pp.20-29
• /
• 1995

When structures are constructed by welding, structural elements are always accompained by welding residual stress and deformation. Therefore, when the rigidity and strength of the welded structures is considered, it is very important to have sufficient information about the effect of initial deflection and welding residual stress on them. In this paper, the square plates with welding residual stress under compression are dealt with; First, heat conduction and thermal elastic-plastic problems are analyzed by finite element method using 4-node isoparametric elements for assessment on the ultimate strength of welding joint. Later, the ultimate strength of welding joint is assessed by examining the effect of changed type of loading. The specimens are 500{\times}$500mm(a/b=1) and 750{\times}$500mm(a/b=1.5) rectangular plates of whichthicknesses is 9.0mm and simply supported plates getting axiul load in each direction.

• International Journal of Aeronautical and Space Sciences
• /
• 제9권1호
• /
• pp.85-99
• /
• 2008

The dynamic response analysis for large structures using finite element method requires a large amount of computational resources. This paper presents an efficient vibration analysis procedure by combining node-based substructuring reduction method with a response analysis scheme for structures with undamped, proportional or nonproportional damping. The iterative form of substructuring reduction scheme is derived to reduce the full eigenproblem and to calculate the dynamic responses. In calculating the time response, direct integration scheme is used because it can be applied directly to the reduced model. Especially for the non proportional damping matrix, the transformation matrices defined in the displacement space are used to reduce the system. The efficiency and the effectiveness of the present method are demonstrated through the numerical examples.

• 전산구조공학
• /
• 제11권3호
• /
• pp.229-239
• /
• 1998

복합재료는 강도-무게비가 다른 재료들에 비해 훨씬 크기 때문에 부재의 좌굴문제가 대단히 중요하게 취급되며, 본 논문에서는 축방향 압축력을 받는 복합재료로 된 쉘 부재의 좌굴해석이 수행된다. 이 재료는 일반적으로 이방성 재료 특성을 나타내 보이나, 섬유들이 한 방향으로만 배치되어 있는 경우 섬유방향에 연직한 평면에서의 강도나 탄성계수들은 모두 일정한 횡 등방성 재료성질을 가진 것으로 간주할 수 있다. 9 절점 degenerate 쉘 유한요소를 사용한 선형안정해석, LUSAS 범용 프로그램을 이용한 구조해석, 그리고 고전적 쉘 좌굴방정식에 의한 해석들을 수행하였으며, 그 결과들을 서로 비교, 분석하였다. 고려된 등방성 재료나 횡 등방성 재료의 경우 모두, degenerate 유한요소해석으로 계산한 임계하중들은 고전적 이론해에 의한 결과들 보다 낮았으며, LUSAS 결과들과는 거의 같았다. 이는 degenerate 유한요소에 의한 선형안정해석 결과들이 안전측에 듬을 의미하며, 복합재료로 된 쉘 구조물의 좌굴해석에 degenerate 유한요소를 효율적으로 적용할 수 있음을 의미한다.

• Advances in aircraft and spacecraft science
• /
• 제9권6호
• /
• pp.507-523
• /
• 2022

This study is aimed to accurately predict the vibration response of two types of functionally graded sandwich plates, one with FGM core and another with FGM face sheets. The gradation in FGM layer is quantified by exponential method. An efficient zig-zag theory is used and the zigzag impacts are established via a linear unit Heaviside step function. The present theory fulfills interlaminar transverse stress continuity at the interface and zero condition at the top and bottom surfaces of the plate for transverse shear stresses. Nine-noded C-0 FE having 8DOF/node is utilized throughout analysis. The present model is free from the obligation of any penalty function or post-processing technique and hence is computationally efficient. Numerical results have been presented on the free vibration behavior of sandwich FGM for different end conditions, lamination schemes and layer orientations. The applicability of present model is confirmed by comparing with published results. Several new results are also specified, which will serve as the benchmark for future studies.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권9호
• /
• pp.471-475
• /
• 2001

ln this paper, a micromachined micromechanical switch is presented. The presented switch is operated in the vertical direction to the substrate by an electrostatic force between two parallel plates. The moving plate is pulled down to connect the bumps of the bias node$(V_{DD}/ or GND)$ to the bumps of the output node when a oltage difference exists between the moving plate and the input plate. The switch was designed to operate at a low switching voltage$(\risingdotseq5V)$ by including a large-area, narrow-gap, parallel plate capacitor A theoretical analysis of the designed switch was performed in order to determine its geometry fitting the desired pull-in voltage and release voltage. The designed switch was fabricated by surface micromachining combined with Ni electroplating. From the experimental results of the fabricated switch, its pull-in voltage came Out to be less than 5V and the measured maximum allowable current was 150mA. The measured average ON-state resistance was about 8$\Omega$, and the OFF-state resistance was too high to be measured with digital multimeter.