• Bulletin of the Korean Chemical Society
• /
• v.8 no.3
• /
• pp.185-189
• /
• 1987

Reactions of $Ir(ClO)_4(CO)(PPh_3)_2$ with dicyano olefins, cis-NCCH = CH$CH_2$$CH_2$CN (cDC1B), trans-NCCH = CH$CH_2$$CH_2$CN (tDC1B), trans-NC$CH_2$CH = CH$CH_2$CN (tDC2B), and NC$CH_2$$CH_2$$CH_2$$CH_2$CN (DCB) produce binuclear dicationic iridium (I) complexes, $[(CO)(PPh_3)_2Ir-NC-A-CN-Ir(PPh_3)_2(CO)](ClO_4)_2$ (NC-A-CN = cDC1B (1a), tDC1B (1b), tDC2B (1c), DCB (1d)). Complexes 1a-1d react with hydrogen to give binuclear dicationic tetrahydrido iridium (Ⅲ ) complexes, $[(CO)(PPh_3)_2(H)_2Ir-NC-A-CN-Ir(H)_2(PPh_3)_2(CO)](ClO_4)_2$ (NC-A-CN = cDC1B (2a), tDC1B (2b), tDC2B (2c), DCB (2d)). Complexes 2a and 2b catalyze the hydrogenation of cDC1B and tDC1B, respectively to give DCB, while the complex 2c is catalytically active for the isomerization of tDC2B to give cDC1B and tDC1B and the hydrogenation of tDC2B to give DCB at $100^{\circ}C$.

• Journal of Life Science
• /
• v.33 no.11
• /
• pp.897-904
• /
• 2023

This study was done to develope genetic markers with the unique characteristics of genes according to the genomic information of Bacillus velezensis K10. B. velezensis K10 maintained a total of 4,159,835 bps, which was found to encode 5,136 open reading frames (orfs). B. velezensis K10 was found to have much more gene migration due to external factors overall compared to standard strain B. velezensis JS25R. In order to discover genetic selection markers, orfs on the genome to be easily induced to gene mutation were surveyed such as recombinase, integrase, transposase, and phage-related genes. As a result of the investigation, 9 candidate markers were isolated with high possibility as genetic selection markers. Although a part in the various origin's areas showed specificities in comparison with homology, the selected markers were all existed in phage-related areas because they were relatively lower homologies in phage-related genes. PCR analysis was done on B. licheniformis K12, B. velezensis K10, B. subtilis, and B. cereus to establish them as inter-species candidate selection markers. As a result, it was confirmed that B. velezensis K10-specific PCR products were formed in a total of 6 primer sets such as BV3 and BV5 to 9. On the other hand, analysis at the subspecies level observed the formation of B. velezensis K10-specific PCR products in 4 primer sets such as BV3, 5, 8, and 9. Among them, since BV5 and BV8 were detected by very specific results, we suggest that BV5 and 8 can be used as B. velezensis K10 gene selection markers at the species and sub-species level.

• The Korean Journal of Malacology
• /
• v.10 no.1
• /
• pp.19-26
• /
• 1994

Eight species of the family Bithyniidae, Bithynia tentaculata, B. leachi, B. siaminsis, B manchourica, B misella, B. kiusiuensis, Gabbia australis and a Bithynia wp. collected from Nepal, were studied for their relationship between species. Total 20 characters were employed for the principal component analysis(PCA) and taxonomic distance. G. misella and B. kiusiuensis were closely related and similar to G. australis. B. manchourica, B. tentaculata and B. siamensis relatively closed group, and taxonomic distance of B. leachi was far from the other species.

• Bulletin of the Korean Chemical Society
• /
• v.8 no.3
• /
• pp.147-149
• /
• 1987

The out-of-plane bending, vibrational-rotational FT-IR spectra of dichloroborane molecule were analyzed. The band centers are 785.992, 785.723, 647.217, and 646.997 $cm^{-1}$ and centrifugal distortion constants are $2.2{\times}10^{-6},\;5.5{\times}10^{-6},\;0.2{\times}10^{-6}$, and $0.7{\times}10^{-6}cm^{-1}$ for $H^{11}B^{35}Cl_2$, $H^{11}B^{35}Cl^{37}Cl$, $D^{11}B^{35}Cl_2$, and $D^{11}B^{35}Cl^{37}Cl$, respectively. The theoretical spectrum of $D^{11}B^{36}Cl_2$ was plotted to conform the molecular constants and the rotational constants for the first excited vibrational state of this molecule were A' = 1.165932, B' = 0.106166, and C' = 0.097229 $cm^{-1}$. The calculated spectra were in good agreement with the observed spectra.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.1 s.116
• /
• pp.37-43
• /
• 2007

In this.paper, we introduce design and implementation results of the single balanced diode mixer for European point-to-point microwave radio in order to improve flatness performance. When a resonator such as RF filter is integrated with a mixer, impedance characteristic of 50 ohm is maintained only in RF band, not in LO band resulting deterioration of flatness performance because of LO power variation on the diode. In the paper, we suggest a design method of mixer integrated with image rejection filter and LO harmonic filter to have a better performance of flatness using embedding electrical length between filter and mixer's port. Frequency specification of fabricated mixer is $21.2{\sim}22.6\;GHz$ for RF, $19.32{\sim}20.72\;GHz$ for LO and 1.88 GHz+/-50 MHz for IF, respectively. Measured results show conversion loss of 8.5 dB, flatness of 2 dB, input PldB of 8 dBm, IIP3 of 15 dBm under LO power level of 10 dBm. Return losses of RF, LO and IF port are under -12 dB, -10 dB and -5 dB, respectively. Isolations of LO/RF and LO/IF are 20 dB and 50 dB, respectively.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.6
• /
• pp.1053-1058
• /
• 2021

This paper presents the multi-band mixer which converts a X-, K- and Ka-band adaptively by adjusting the gate-bias voltage of an active device. The proposed mixer presented a conversion loss of -10 dB at -0.8 V gate-bias voltage for X-band, a conversion loss of -9 dB at -0.3 V gate-bias voltage for K-band and for Ka-band, a conversion loss of -7 dB at -0.2 V gate-bias voltage under the LO power of +6.0 dBm. The 1dB compression point (P1dB) is +0.5 dBm for all band.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.11
• /
• pp.837-842
• /
• 2017

In this paper, as a basic study for combination of turbo equalizer and 4D-8PSK-TCM(4 Dimensional 8 Phase Shift Keying Trellis Coded Modulation) system, which is recommended for X-band band satellite communication in CCSDS, a system combining 8PSK-TCM system and turbo equalizer has designed and performance evaluation of the system has performed. BER performance of 8PSK and 8PSK-TCM systems has evaluated and analyzed in AWGN, Proakis B and Proakis C channels in detail. As results of simulation, BER performance of 8PSK-TCM system is better than 8PSK system in AWGN environment. Furthermore, it can be confirmed that the system combining the 8PSK-TCM system with the turbo equalizer can further improve the BER performance through iterative equalization in the ISI channel environment. The 8PSK-TCM system combined with the turbo equalizer requires SNR of 5.9 dB for BER performance of $10^{-3}$ with 5 iterative equalization in Proakis B and SNR of 9.1 dB for BER of $10^{-2}$ with 5 iterative equalization in Proakis C.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.12
• /
• pp.77-84
• /
• 2007

In this parer, a wideband low-noise amplifier (LNA) has been realized in a 0.18mm CMOS technology for the applications of subsampling direct-conversion RF receivers. By exploiting the inverter-type transimpedance input stage with a 3rd-order Chebyshev matching network, the wideband LNA demonstrates the measured results of the -3dB bandwidth of 5.35GHz, the power gain (S21) of $12\sim18dB$, the noise figure (NF) of $6.9\sim10.8dB$, and the broadband input/output impedance matching of less than -10dB/-24dB within the bandwidth, respectively. The chip dissipates 32.4mW from a single 1.8V supply, and occupies the area of $0.56\times1.0mm^2$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.6A
• /
• pp.510-516
• /
• 2005

In this paper, we discuss parameters of line code and simulate a same optical ethernet having minimum bandwidth(MB810) and non-minimum bandwidth line code(8B/10B) to present the possibility of improving of transmission performance using minimum bandwidth line code on the high speed optical ethernet. We design the high speed optical ethernet using Serial type LAN PHY 10GBASE-E(WDM type LAN PHY 10GBASE-LX4) for the single(multi) channel link. To compare the transmission performance of MB810, 8B/10B line code we measure the bit error rate(BER) according to the received optical power of single and multi channel link.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.7
• /
• pp.1139-1146
• /
• 2000

In this paper, circular-polarized dipole antenna with a novel structure is designed, simulated and fabricated for PCS or IMT-2000 base station at an arbitrary test frequency(1.575 GHz). Its radiation pattern is analyzed by means of physical optics(PO). The designed antenna is made up of a horizontal and a vertical dipole elements at a height of λ/4 above an reflector. One of λ/4 length vertical dipole element is located at a height of λ/8 above an reflector. In this case, circularly polarized radiation pattern is obtained by making impedance difference due to adjusting the length of each element. The characteristic of antenna measured from this study is that return loss is 18.4 dB, -10 dB bandwidth is 360 MHz(22.8%), 2 dB axial ratio bandwidth is 30 MHz, -3 dB beamwidth is 76$^{\circ}$, 2 dB axial ratio beamwidth is 58$^{\circ}$, axial ratio is 1.7 dB at 1.575 GHz. Radiation pattern is in well agreement with the result of PO.