• 한국정보통신설비학회:학술대회논문집
• /
• 2006.08a
• /
• pp.43-46
• /
• 2006

IEEE 802.16 WirelessMAN aiming to broadband wireless access (BWA) is evolving to 4G mobile communication system through the standardization of IEEE 802.16e supporting mobility on existing fixed WirelessMAN system. It is necessary for hand-over to provide seamless data service while MS (Mobile Station) moves to another BS (Base Station). Because the performance of handover affects packet loss or delay of any communications, it must consider low latency handover mechanism in packet based network. In this paper, we describes handover scheme of IEEE 802.16e with the cell edge interference problem and shows the way to solve the problem in frequency reuse one deployment. Our scheme reduces the handover latency and packet loss probability.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.32 no.4
• /
• pp.89-99
• /
• 2007

In this paper, an analytic model of a sleep mode operation in the IEEE 802.16e is investigated. A mobile subscriber station(MSS) goes to sleep mode after negotiations with the base station(BS) and wakes up periodically for a short interval to check whether there is downlink traffic to it. If the arrival of traffic is notified, an MSS returns to wake mode. Otherwise, it again enters increased sleep interval which is double as the previous one. In order to consider the situation more practically, we propose the sleep mode starting threshold, during which MSS should await packets before it enters the sleep mode. By modifying the M/G/l with multiple vacations model, energy consumption ratio(ECR) and average packet response time are calculated. Our analytic model provides potential guidance in determining the optimal parameters values such as sleep mode starting threshold, minimal sleep and maximal sleep window.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.4
• /
• pp.151-159
• /
• 2008

Mobile broadband wireless network is emerging as one of the hottest research areas due to technical advances, and the demands of users who wish to enjoy the same network experience on the move. In this paper, we investigate the handover process at the medium access control (MAC) layer in an IEEE 802.16e-based system. In particular, we identify problems concerned with the scan initiation Process called cell reselection and propose a received signal strength (RSS) estimation scheme to dynamically trigger a scanning process. We show how the RSS estimation scheme can timely initiate a scanning process by anticipating RSS values considering scan duration required.

• Journal of Communications and Networks
• /
• v.14 no.2
• /
• pp.179-187
• /
• 2012

Power saving is one of the most important features that extends the lifetime of portable devices in mobile wireless networks. The IEEE 802.16e mobile broadband wireless access system adopts a power saving mechanism with a binary truncated exponent algorithm for determining sleep intervals. When using this standard power saving scheme, there is often a delay before data packets are received at the mobile subscriber station (MSS). In order to extend the lifetime of a MSS, the battery energy must be used efficiently. This paper presents a dynamically alternating sleep interval scheduling algorithm as a solution to deal with the power consumption problem. We take into account different traffic classes and schedule a proper sequence of power saving classes. The window size of the sleep interval is calculated dynamically according to the packet arrival rate. We make a tradeoff between the power consumption and packet delay. The method achieves the goal of efficiently reducing the listening window size, which leads to increased power saving. The performance of our proposed scheme is compared to that of the standard power saving scheme. Simulation results demonstrate the superior performance of our power saving scheme and its ability to strike the appropriate performance balance between power saving and packet delay for a MSS in an IEEE 802.16e mobile broadband wireless access system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.5A
• /
• pp.542-548
• /
• 2008

This paper proposes a handover scheme using uplink and downlink signals in IEEE 802.16e systems. Exploiting the channel reciprocity in TDD systems, the proposed scheme triggers handover initiation process using uplink signal. In addition, it exploits the uplink and downlink hysteresis to determine the handover direction. Simulation results show that the proposed algorithm with joint hysteresis reduces the outage probability by about 10% compared with the mobile assisted handover in IEEE 802.16e.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.3A
• /
• pp.247-260
• /
• 2007

This paper solves the problem of finding a suitable sub-channel and power joint allocation method for multiple users in 802.16e OFDMA/TDD cellular systems. The joint allocation is thatfirstly the sub-channel is allocated to the users and then suitable power is allocated. We propose a FASA (Fairness insured Aggressive Sub-channel Allocation) algorithm which is a dynamic channel allocation algorithm considering all users' channel state information conditionally to maximize fairness and throughput. The improved CHC algorithm, which is dynamic power allocation algorithm, is also proposed in this paper The Improved CHC algorithm collects the extra of the downlink transmit power and then re-allocates it to other users. Simulation results show that the proposed improved CHC algorithm additionally increases the fairness and sector throughput.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.7C
• /
• pp.735-742
• /
• 2006

In this paper, we explain the operation scheme and fixed-point design method of DFE (Digital Front End), which performs DC offset compensation, automatic frequency control, and automatic gain control over the input signal to the UE (User Equipment) receiver of IEEE 802.16e OFDMA-TDD system. Then, we analyze the performance of DFE under ITU-R M. 1225 Veh-A 60km/h channel environment. To optimize the fixed-point design of DFE, we reduce the number of bit resulted from calculation without performance degradation, leading to the decreased complexity of the operation in H/W, and design the Loop filter with considering trade-off between the Acquisition time and the Stability.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.7A
• /
• pp.540-547
• /
• 2009

In this paper, we work for the efficient use of the initial ranging contention slot in OFDMA based wireless mobile networks. Specially, the collision reduction method using an automatic adaptive optimal algorithm is studied for initial ranging contention slot used at initial connection of the mobile terminals. As a result, we propose the algorithm that achieves the collision minimization and the auto-dynamic slot arrangement of the initial ranging slots. To evaluate the proposed algorithm, we compare the simulation results of IEEE802.16e fixed initial ranging slot allocation method versus the proposed algorithm. The simulator is developed based on the IEEE802.16e standard MAC frame structure and processing procedures. As the simulation results, we can expect the proposed algorithm can be applied for the unmanned coastal base station because the proposed algorithm has the effect of minimizing administration cost for the base station.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.6
• /
• pp.342-349
• /
• 2019

We describe and anlayzes the methodology and implementation results of H / W configuration and signal characteristics analysis algorithm for analyzing equipment for analyzing OFDMA physical layer based on 802.16e. Recently, demand for signal analysis of instruments that analyze these signals with the development of digital communication signals is rapidly increasing. Accordingly, it is necessary to develop signal analysis equipment capable of analyzing characteristics of a broadband communication signal using a wideband digital signal processing module. In this paper, we have studied the basic theory of OFDMA in order to devise a device capable of analyzing characterisitcs of broadband communication signals. Second, the structure of OFDMA transmitter/receiver was examined. Third, a wideband digitizer was implemented. we design Wimax signal analysis algorithm based on OFDMA among broadband communication methods and propose Wimax physical layer analysis S/W implementation through I, Q signals. The IF downconverter used the receiver module and the LO generation module of the spectrum analyzer. Quantitative analysis result is obtained through the algorithm of Wimax signal analysis by I, Q data.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.3
• /
• pp.103-110
• /
• 2010

This paper addressed the implementation of the systematic performance analysis of Quality of Service (QoS) by using OPNET simulator in the interworking architecture of IEEE 802.16e (mobile WiMAX) and IEEE 802.11e (WLAN) wireless network. Four simulation cases were provided in OPNET simulator and a voice traffic was simulated with various performance metrics, such as Mean Opinion Score (MOS), end-to-end delay and packet transmission ratio. Based on the simulation results, the MOS value presented better in WiMAX to WiMAX case compared to others in both static and mobility case. Meanwhile, end-to-end delay was not greatly affected by mobility in four cases. However, mobility was affected much in MOS value and packet transmission ratio in WLAN to WLAN case than in others.