• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.1A
• /
• pp.8-16
• /
• 2012

Recent work has been shown that cognitive radio systems with multiple antenna at both transmitter and receiver are able to improve performance of secondary users. In such system, the main drawback is the increased complexity and raised cost as the number of antennas increase. It is desirable to apply antenna selection which select a subset of the available antennas so as to solve these problems. In this paper, we consider antenna selection method for cognitive radio systems in correlated channel from the IEEE 802.11n. For a multiple-input multiple-output(MIMO) system with more antennas at transmitter than the receiver, we select the same number of transmit antennas as that of receive antennas. The exhaustive search for optimal antenna becomes impractical. We present criterion for selecting subset in terms of projection of channel correlation vector to increase performance of secondary user with decreasing interference at primary user.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.499-503
• /
• 2005

The objective of this thesis is to measure the limit of the real space where wireless Local Area Network(LAN) is used, and to apply this result as reference to set up a real Wireless LAN environment. The organized circumference was composed of Wireless LAN based on IEEE 802.11b of the American standard, and the examination is carried out on the campus. On the real condition of office environment and open space, the ratio of available distance to a signal at each distance was measured and this result was studied as data to embody wireless LAN on the campus. The measurement under an indoor environment was executed under circumstance having two wall and open space, however, was executed respectively under three circumstances : Where no obstacle, where one wall exists, and where two or more walls exist.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.7
• /
• pp.807-815
• /
• 2019

In this paper, we design a power amplifier to support quad-band in wireless communication devices using RF CMOS 180-nm process. The proposed power amplifier consists of low-band 0.9, 1.8, and 2.4 GHz and high-band 5 GHz. We proposed a structure that can support each input matching network without using a switch. For maximum linear output power, the output matching network was designed for impedance conversion to the power matching point. The fabricated quad-band power amplifier was verified using modulation signals. The long-term evolution(LTE) 10 MHz modulated signal was used for 0.9 and 1.8 GHz, and the measured output power is 23.55 and 24.23 dBm, respectively. The LTE 20 MHz modulated signal was used for 1.8 GHz, and the measured output power is 22.24 dBm. The wireless local area network(WLAN) 802.11n modulated signal was used for 2.4 GHz and 5.0 GHz. We obtain maximum linear output power of 20.58 dBm at 2.4 GHz and 17.7 dBm at 5.0 GHz.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.11
• /
• pp.1211-1216
• /
• 1998

Bis(diethyldithiocarbamato)ioxomolybdenum(VI), cis-MoO2(S2CNEt2)2, 1, reacted with chlorotrimethylsilane (Me33SiCl) to give a seven-coordinate, pentagonal bipyramidal complex MoOC12(S2CN]Et2)2, 3, in which the oxo ligand is trans to the chloride ligand and the two chloride ligands are mutually cis. The monooxo molybdenum complex bis(diethyidithiocarbamato)oxomolybdenum(IV), MoO(S2CNEt2)2, 2, reacted with phenyl isocyanate (PhNCO) to give an Mo dimer MO2{μ-N(CONPh)Ph}(μ-NPh)(NPh)2(S2CNEt2)2, 4, which contains an Mo-Mo bond, two diethyldithiocarbamato ligands, two terminal imido (NPh) ligands, and two bridging hnido (NPh) ligands. One of the two bridging NPh ligands seemed to have been attacked by the electrophilic phenyl isocyanate carbon, which suggests that the bridging imido NPh ligand is more nucleophilic than the terminal one. Crystallographic data for 3: monoclinic space group P21/c, a=8.908(l) Å, b=17.509(3) Å, c=12.683(2) Å, β=110.15(1)°, Z=4, R(wR2)=0.0611(0.1385). Crystallographic data for 4-THF: orthorhombic space group P212121, a=17.932(4) Å, b=22.715(5) Å, c=11.802(3) Å, Z=4, R(wR2)=0.0585(0.1286).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.8A
• /
• pp.1367-1377
• /
• 2001

고전력 증폭기의 비선형성, 수신 주파수 편차 및 심볼 타이밍 편차가 모두 존재하는 실제 IEEE 802.11a 무선 LNA 시스템의 성능을 분석하였다. 이러한 시스템에서 데이터가 OFDM 변조된 후 주파수 선택적 Rayleigh 페이딩 채널을 통하여 전송될 때의 비트 오류율을 구하였다. 증폭기의 최대 출력 전력 대 평균 출력 전력비가 6dB이며 주파수 편차가 0.01이고 심볼 타이밍 편차가 2 샘플링 주기 시간인 경우에, 이 무선 LAN 시스템에서 10-5의 비트 오류율을 얻기 위하여 필요한 $E_{b}$ /$N_{o}$ 의 크기는 대략 20~24dB로 분석되었다. 이와 같은 실제 시스템과 정확한 채널 추정, 선형 증폭기, 정확한 주파수 동기 및 심볼 동기 가정의 이상적인 시스템간의 성능을 비교한 결과, 같은 크기의 비트 오류율을 얻기 위하여 이 실제 시스템에서 대략 1~3dB 정도의 $E_{b}$ /$N_{o}$ 가 더 소요된다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.2
• /
• pp.265-274
• /
• 2011

In this paper, it is studied on wide radiating slot antenna's miniaturization for ultra wide-band(UWB) technologies and notch structure to prevent interference between UWB systems and existing wireless systems for using Wi-Fi service of IEEE standards 802.11 a/n. Proposed antenna that wide slot is decreased from $\lambda/2$ to $\lambda/4$ length of resonant frequency has decreased by 72 % compared with conventional antenna. And optimized T-shaped CPW-fed stub has satisfied UWB bandwidth for 3.0~11.8 GHz. Then, creating 2-order Hilbert curve slot line in the stub's patch area, 4.9~5.6 GHz that centered frequency is 5 GHz is eliminated. Finally, the designed antenna constructed on FR4-epoxy has $20{\times}15\;mm^2$ dimension. The measured results that are obtained return loss under -10 dB through 3.2~11.8 GHz without Wi-Fi bandwidth, a linear phase characteristic, a stable group delay, and omnidirectional radiation patterns are presented.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.11 no.1
• /
• pp.1-9
• /
• 2012

In this paper, we proposed a method of improving the location estimation error existing in RTLS (Real Time Location Service) system for the individual mobility. As ubiquitous age comes, interest for indoor location tracking system is getting more increased. However, existing indoor location tracking system does not correspond actively to frequent changes in indoor environment, and there is a problem that correct location measurement of moving object is difficult due to NLOS (non-line-of-sight) property of indoor environment. Purpose of this paper is to propose an environment accommodation location tracking system that improves the location precision of moving object and grasps location of the object effectively, which is essential an element effectively to provide service and satisfy various users' request.

• ETRI Journal
• /
• v.36 no.3
• /
• pp.352-360
• /
• 2014

This paper presents a 900 MHz zero-IF RF transceiver for IEEE 802.15.4g Smart Utility Networks OFDM systems. The proposed RF transceiver comprises an RF front end, a Tx baseband analog circuit, an Rx baseband analog circuit, and a ${\Delta}{\Sigma}$ fractional-N frequency synthesizer. In the RF front end, re-use of a matching network reduces the chip size of the RF transceiver. Since a T/Rx switch is implemented only at the input of the low noise amplifier, the driver amplifier can deliver its output power to an antenna without any signal loss; thus, leading to a low dc power consumption. The proposed current-driven passive mixer in Rx and voltage-mode passive mixer in Tx can mitigate the IQ crosstalk problem, while maintaining 50% duty-cycle in local oscillator clocks. The overall Rx-baseband circuits can provide a voltage gain of 70 dB with a 1 dB gain control step. The proposed RF transceiver is implemented in a $0.18{\mu}$ CMOS technology and consumes 37 mA in Tx mode and 38 mA in Rx mode from a 1.8 V supply voltage. The fabricated chip shows a Tx average power of -2 dBm, a sensitivity level of -103 dBm at 100 Kbps with PER < 1%, an Rx input $P_{1dB}$ of -11 dBm, and an Rx input IP3 of -2.3 dBm.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.3
• /
• pp.314-320
• /
• 1999

Several bisphosphine- and bisphosphite-substituted Re-imido complexes have been prepared from Re(NPh)(PPh3)2Cl3, 1, and Re(N-C6H3-i-Pr2)2Cl3(py), 4. Compound 1 reacted with trimethyl phosphate (P(OMe)3) to give a mixture of two isomers,mer,trans-Re(NPh)(P(OMe)3)2Cl3, 2, and fac,cis-Re(NPh)(P(OMe)3)2Cl3, 2a. In this reaction, the mer,trans-isomer is a major product. Complex 1 also reacted with triethylphosphine (PEt3) to exclusively give mertrans-Re(NPh)(PEt3)2Cl3, 3. Compound 4 reacted with trimethylphosphine (PMe3) to give mer,trans-Re(N-C6H3-i-Pr2)(PMe3)2Cl3, 5, which was converted to mer-Re(N-C6H3-i-Pr2)(PMe)(OPMe3)Cl3, 6, on exposure to air. Crystallographic data for 2: monoclinic space group P21/n, a = 8.870(2) Å, b = 14.393(3) Å, c = 17.114(4) Å, β = 101.43(2)°, Z = 4, R(wR2) = 0.0521(0.1293). Crystallographic data for 5: orthorhombic space group P212121, a = 11.307(l) Å, b = 11.802(l) Å, c = 19.193(2) Å, Z = 4, R(wR2) = 0.0250(0.0593). Crystallographic data for 6: orthorhombic space group P212121, a = 14.036(4) Å, b = 16.486(5) Å, c = 11.397(3) Å, Z = 4, R(wR2) = 0.0261(0.0630).

• Journal of Environmental Science International
• /
• v.18 no.7
• /
• pp.797-802
• /
• 2009

To control degradation rate of biodegradable poly(lactide)s (PLA), the stereochemical PLAs with different ratios of d-lactide and l-lactide units were synthesized by the ring open polymerization and the their degradation kinetics were measured by a Langmuir film balance. The alkaline (pH=11) degradation of poly(l-lactide) (l-PLA) monolayer showed the faster rate at a surface pressure of 4 mN/m in the ranges from to 0 to 7 mN/m. However, the enzymatic degradation of l-PLA with Proteinase K did not occur until 4 mN/m. Above a constant surface pressure of 4 mN/m, the degradation rate was increased with a constant surface pressure. These behaviors might be attributed to the difference in the contacted area with degradation medium: alkaline ions need small contact area with l-PLA while enzymes require much bigger one to be activated due to different medium sizes. The stereochmical PLA monolayers showed that the alkaline degradation was increased with their optical impurities while the enzymatic one was inversed. These results could be explained by the decrease of crystallinity with the optical impurity and the inactivity of enzyme to d-LA unit.