• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.4 s.346
• /
• pp.52-57
• /
• 2006

In this paper, the triple-band planar monopole antennas are designed for cellular communication, WiBro and WLAN(IEEE802.11b/g) communication and WLAN(IEEE802.11a) communication of 5GHz band to using filled mobile convergence subscriber unit. Various types of antennas are designed and examined experimentally as bended in the low and middle band radiation elements to decrease antennas size and increased the width of radiation elements to improve bandwidth The proposed antennas are reduced by 11% in antenna size with bended low-band radiation elements down and are extended by $30%{\sim}40%$ in bandwidth by increasing the width of the radiation element at 800MHz band.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.1
• /
• pp.103-107
• /
• 2009

In this paper, we designed and implemented a dual band chip antenna for WLAN, which contains within the small LAN card contrary to the enternal AP(Access Point) antenna. Limiting about the antenna size, we used dielectrics of high permittivity. Totally considering problems of demand-supply, price and characteristics, we used that relative dielectrics of ceramic is 9.8 and the thickness is 3.5mm and 5mm. Ceramic antenna can be used not only triple mode of IEEE 802.11.a,g and b but also broadband. The frequency bands have wideband characteristics of 2.4~2.5GHz and 4.9~5.85GHz and relatively constant performance.

• Journal of Communications and Networks
• /
• v.2 no.1
• /
• pp.46-57
• /
• 2000

Ongoing standardization effort on 3G cellular system in 3GPP (UNTS) is based on GPRS core network and promises a global standard for systems capable of offering ubiquitous access to internet for mobile users. Considered radio access systems(FDD CDMA, TDD CDMA, and EDGE) are optimized for robust mobile use. However, there are alternative relatively high-rate radio interfaces being standardized for WLAN (IEEE802.11 and HIPER-LAN/2) which are capable of delivering significantly higher data rates to static or semi-static terminals with much less overhead. Also WPANs(BLUETOOTH, IEEE802.15), which will be present in virtually every mobile handset in the near future, are offering low cast and considerable access data rate and thus are very attractive for interworking scenarios. The prospect of using these interfaces as alternative RANs inthe modular UMTS architecture is very promising. Additionally, the recent inclusion of M-IP in the UMTS R99 standard opens the way for IP-level interfacing to the core network. This article offers an overview into WLAN-Cellular interworking. A brief overview of GPRS, UMTS cellular architectures and relevant WLAN standards is given. Possible interworking architectures are presented.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.882-885
• /
• 2008

Recently, various types of wireless networks have been proliferated. Bluetooth, IEEE 802.11 WLAN, 802.16e Mobile WiMAX (or Wibro) and 3G celluar networks are some examples. Accordingly, research on seamless mobility support mechanisms among homogeneous or heterogeneous networks has drawn significant interests. This paper examines recent research efforts on seamless mobility support mechanisms from link to transport layer. Yet, no single solution meets all the requirements for supporting the seamless mobility and it seems hard to tell which layer is the most appropriate one for supporting mobility. This area is still wide open and needs further research.

• Journal of Korea Multimedia Society
• /
• v.10 no.11
• /
• pp.1483-1495
• /
• 2007

Thanks to IEEE 802.11 technique, accessing Internet through a wireless LAN(Local Area Network) is possible in the most of the places including university campuses, shopping malls, offices, hospitals, stations, and so on. Most of the APs(access points) for wireless LAN are supporting 2.4 GHz band 802.11b and 802.11g protocols. This paper is introducing a C# library function which can be used to read RSSIs(Received Signal Strength Indicator) from APs. An LBS(Location Based Service) estimates the current location of the user and provides useful user's location-based services such as navigation, points of interest, and so on. Therefore, indoor, LBS is very desirable. However, an indoor LBS cannot be realized unless indoor position ing is possible. For indoor positioning, techniques of using infrared, ultrasound, signal strength of UDP packet have been proposed. One of the disadvantages of these techniques is that they require special equipments dedicated for positioning. On the other hand, wireless LAN-based indoor positioning does not require any special equipments and more economical. A wireless LAN-based positioning cannot be realized without reading RSSIs from APs. Therefore, our C# library function will be widely used in the field of indoor positioning. In addition to providing a C# library function of reading RSSI, this paper introduces implementation of indoor positioning modules making use of the library function. The methods used in the implementation are K-NN(K Nearest Neighbors), Bayesian and trilateration. K-NN and Bayesian are kind of fingerprinting method. A fingerprint method consists of off-line phase and realtime phase. The process time of realtime phase must be fast. This paper proposes a decision tree method in order to improve the process time of realtime phase. Experimental results of comparing performances of these methods are also discussed.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.1
• /
• pp.31-41
• /
• 2014

This paper proposes a virtual mobile ad-hoc network (VMANET) model that automatically divides heterogeneous mobile devices of a MANET into a number of network groups depending on the communication capacity(data rate) of different network operational models such as IEEE 802.11g, IEEE 802.11b, and Frequency Hopping. In addition, it supports a distinct routing protocol for each network group of VMANETs, resulting in running multiple routing protocols concurrently on different groups of VMANETs. To reduce the network congestion and improve the network load balance, a default MANET gateway is configured in each VMANET and these gateways are responsible for integrating the MANET and IP networks. Experiment results show that the proposed model outperforms the conventional IMANET by significantly increasing throughput and reducing network congestion and network delay.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.3
• /
• pp.547-551
• /
• 2010

In this paper, Double rectangular patch with 4-bridges is investigated for solution of IEEE 802.11b/g(2.4GHz) and 802.11a(5.7GHz). Rectangular patch for 5.7GHz frequency band is printed on the PCB substrate and connected to another rectangular patch for 2.4GHz frequency band with 4-bridges to obtain dual band operation in a antenna element. The proposed antenna has a low profile and is fed by $50{\Omega}$ coaxial line. The dielectric constant of the designed antenna substrate is 3.27. Two rectangular patches have each resonance frequencies that are 2.4GHz and 5.7GHz. A dual-band characteristic is shown as connecting two rectangular patch using four bridges. Also, the proposed antenna is shown input return loss that is below -10dB at 2.4GHz and 5.7GHz of WLAN(Wireless LAN).

• Proceedings of the IEEK Conference
• /
• 2000.06a
• /
• pp.221-224
• /
• 2000

In this paper, we introduce an efficient and security-enhanced re-authentication and key exchange protocol for IEEE 802.11 Wireless LANs using Re-authentication Period. We introduce a low computational complexity re-authentication and key exchange procedure that provides robustness in face of cryptographic attacks. This procedure accounts for the wireless media limitations, e.g. limited bandwidth and noise. We introduce the Re-authentication Period that reflects the frequency that the re-authentication procedure should be executed. We provide the user with suitable guidelines that will help in the determination of the re-authentication period.

• 한국IT서비스학회:학술대회논문집
• /
• 2010.05a
• /
• pp.202-206
• /
• 2010

무선 메쉬 네트워크(Wireless Mesh Network, WMN)는 유비쿼터스 환경 및 무선 브로드 밴드 액세스를 제공하기 위한 차세대 핵심기술로 떠오르고 있다. 다양한 멀티미디어 서비스가 존재하는 유비쿼터스 환경에서 실시간 서비스 제공을 위해서는 네트워크 용량 증대가 요구되며, 이를 위하여 WMN에서 네트워크 용량을 증대시키기 위한 다중 인터페이스 활용 기술이 중요한 이슈로 대두되고 있다. 하지만 WMN에서 주로 사용하는 인터페이스 기술인 IEEE 802.11 표준에서는 IEEE 802.11b/g 또는 IEEE 802.11a와 같은 스펙에 따라 간섭 없이 사용할 수 있는 채널은 3개 또는 12개로 한정되어 있기 때문에 다중 인터페이스 활용을 통해 증대된 가용 자원 효율성을 극대화하기 위해서 효율적인 채널 할당 기법의 연구가 요구되며, 이에 따라 본 논문에서는 채널 그룹 설정을 통하여 간섭 발생을 최소화하며 채널스캐닝 과정을 수행하지 않고 채널 변경을 진행함으로써 채널 스캐닝 과정으로 발생하는 전송 지연을 최소화하여 네트워크 성능을 향상시킬 수 있는 채널 할당 기법을 제안한다.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.327-330
• /
• 2008

This paper shows an implementation of WLAN-based Audio/Video(A/V) system for multimedia home networks. Proposed WLAN-based A/V system can transmit multimedia data of high quality. The entire system consists of a 16-bit RISC controller, a program ROM, a SRAM, timers, an interrupt controller, a DART, GPIOs, an I2C and the OFDM modem supporting for the IEEE 802.11g standard. The simple MAC functions are implemented by firmware on an embedded 16-bit RISC controller. The OFDM modem supports a complete set of data rates up to 54Mbps. Proposed the system is implemented by an Altera FPGA EP1S60F1020C6 device, a 10-bit 2-ch DAC, a 10-bit 2-ch ADC and RF/IF chips.