• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.6C
• /
• pp.231-239
• /
• 2010

This paper presents the thermal conduction analysis (using ABAQUS ver 6.10 and FLUENT ver 6.3.26) of geothermal energy for PHC, steel and copper energy piles by considering subsurface environment, thermal efficiency of grouting materials, and fluid velocity of circulating fluid. Results show that higher thermal efficiency for copper pile is observed followed by steel and PHC piles depending on the grouting materials and subsurface condition. The fluid velocity of 0.6m/s presents most efficient outflow temperature (275.4K) and heat exchange rate (103.1W/m) for the case of PHC pile during 8 hours operation. Analysis of operation schedule concludes that 16 hours of stand-by allows charging geothermal energy following 8 hours operation in winter season is most appropriate with 0.1K of temperature difference from the steady-state condition.

• Journal of the Korean Geotechnical Society
• /
• v.35 no.10
• /
• pp.5-15
• /
• 2019

In this study, to investigate the effect of long-term performance of energy pile on ground temperature, a numerical analysis was conducted by simulating the ground where an energy pile was installed. In the analysis, a changing distance from the outer perimeter of a heat circulation pipe to the surface of concrete pile for an intermittent operation (8-hour operation, 16-hour stop) was considered. Simulation results showed that long-term heat exchange under the intermittent operation of energy pile reduced a thermal recovery in the ground and increased the ground temperature through the residual thermal energy. In addition, the ground temperature became higher as it got closer to the energy pile and increased as the distance from the outer perimeter of heat circulation pipe to the surface of concrete pile decreased.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.8
• /
• pp.1817-1823
• /
• 2012

On the matter in line with NCW(Network Centric Warfare) and information age, the military is on an efficient-expanding trend as sharing with status and information promptly through the various and complex exchange of messages and the voice communication between operators, using a highly efficient operating console. The recording devices that record an operational situation to plan a new operation through the mission analysis and result reviews after finishing military operation or training are developed and operated. Recording method is classified into two groups. one is the direct recording of video data for screen, another is the recording of an exchange of data. This study proposes the new data-oriented recording method to reduce the readiness time for replay and the improvement scheme.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.8
• /
• pp.1631-1641
• /
• 2012

A TDMA system in satellite communication has been utilized. Especially DVB-S2 was standardized and now operated in satellite broadcasting system. In this paper, we propose a TDMA frame structure appropriate for special purpose which has the good reliablilty in a poor RF environment even if frequency efficiency is decreased. TDMA frame duration is 12 seconds which is long duration in comparison with general TDMA system with several ms. Designing the frame structure, time and frequency shift in single frame duration are considered. Simulation results show that the proposed frame structure and synchronization method has robust synchronization performance when the terminal is even in low SNR as well as 25 kHz frequency offsets.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.6
• /
• pp.2381-2391
• /
• 2013

In general, ground's thermal properties, types of heat exchanger, operational method, thermal interference between piles can be considered as key factors which affect the thermal performance of energy pile. This study focused on the effect of these factors on the performance by a numerical model reflecting a real ground condition. Depending on the degree of saturation of ground, pile's heat transfer rate showed a maximum difference of three times, and the thermal resistance of pile made a maximum difference of 8.7%. As for the type of heat exchanger effects on thermal performance, thermal efficiency of 3U type energy pile had a higher value than those of W and U types. The periodic operation (8 hours operation, 16 hours pause) can preserve about 20% of heat efficiency compared to continuous operation, and hence it has an advantage of preventing the thermal accumulation phenomenon. Thermal interference effect in group piles may vary depending on the ground condition because the extent decreases as the ground condition varies from saturated to dry. The optimal separation distance that maintains the decreasing rate of heat efficiency less than 1% was suggested as 3.2D in U type, 3.6D in W type, and 3.7D in 3U type in a general ground condition.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.217-220
• /
• 2004

According as utilization for web increases rapidly, it is demanded that model about support interaction between web-based applications systematically and solutions can integrate new distributed platforms and existing environment effectively, accordingly, Web Services appeared by solution in reply. These days, a lot of software and hardware companies try to adoption of Web Services to their market, attenpt to construct their applications associationing components from various Web Services providers. However, to execute Web Services completely. it must have interoperability and need the standardization work that avoid thing which is subject to platform, application as well as service and programming language from other companies. WS-I (Web Services Interoperability organization) have established Basic Profile 1.0 based on XML, UDDI, WSDL and SOAP for web services interoperability and developed usage scenario Profile to apply Web Services in practice. In this paper, to verify suitability Web Services interoperability between heterogeneous two applications, have design and implements the Book Information Web Services that based on the Web Services Client of J2SE platform and the Web Services Server of .NET platform, so that analysis and verify the service by adaptation of WS-I Basic Profile.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.3
• /
• pp.1049-1061
• /
• 2013

In this paper, a relative heat exchange rate is numerically compared for cast-in-place concrete energy piles with different heat exchange pipe configurations, and a new design method for energy piles is proposed. An equivalent heat exchange rate was estimated for the W-type (one series loop), multiple U-type (four parallel loops), and coil-type heat exchanger installed in the same large-diameter drilled shaft. In order to simulate a cooling operation in summer by a CFD analysis, the LWT (leaving water temperature) into a energy pile was fixed at $35^{\circ}C$ and then the EWT (entering water temperature) into a heat pump was monitored. In case of continuously applying the artificial maximum cooling load for 100 hours, all of the three types of heat exchangers show the marginally similar heat exchange rate. However, in case of intermittently applying the cooling load with a cycle of 8 hours operation-16 hours off for 7 consecutive days, the coil type heat exchanger exhibits a heat exchange rate only 86 % of the multiple U-type due to measurable thermal interference between pipe loops in the energy pile. On the other hand, the W-type possesses the similar heat exchange rate to the multiple U-type. The equivalent heat exchange rates for each configuration of heat exchangers obtained from the CFD analysis were adopted for implementing the commercial design program (PILESIM2). Finally, a design method for cast-in-place concrete energy piles is proposed along with a design chart in consideration of typical design factors.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.8
• /
• pp.9-16
• /
• 2007

Currently, the measurement of RF parameters for a base station in operation is typically limited to easily measured forward path items. In this paper, the forward monitoring ports of base stations are used to measure the reverse RF performance. The system has been implemented and effectiveness has been proven on an operating base station. The receiver sensitivity is measured using an internal CDMA modem which is used to monitor the output power based on closed loop power control when the modem is connected to the base station via a voice call. In order to improve accuracy, in addition to the modem Tx adjust(TxAdj) parameter, the detector's actual measurement is used. For accurate receiver sensitivity, the measurement should be made when there is no traffic which is not possible on an operating base station. Therefore, pilot channel chip energy to received signal power spectral density ratio$(E_c/I_o)$ compensation method is used to offset the receiver sensitivity degradation with voice traffic increase.

• Proceedings of the KSAR Conference
• /
• 2001.03a
• /
• pp.84-84
• /
• 2001

한우 농가의 다두화 사육규모에 적합한 번식관리모델 제시 및 수태율 증진을 위한 발정제어 방법을 개발하고자 수행하였다. 1. 년중 번식구의 분만간격은 412.9일, 수태당종부횟수 1.76회에 반하여 계절번식 I구와 II구는 각각 370.4일과 1.51회, 376.5일과 1.48회로 나타났다. 2. 송아지 생산율에 있어서 년중번식구 78.2%(174/184), 계절번식 I구 71.7%(99/138)에 비해 계절번식 II구에서는 79.2%(172/217)로 효율이 다소 높았다. 3. 발정유기방법별 동기화율에 있어서 PGF$_2$$_{\alpha}$ 2회 투여법에서 68.1%(141/207), PRID 삽입법 71.42%(15/21), CIDR 삽입법 86.3%(33/38)에 비해 GnRH-PGF$_2$$_{\alpha}$-GnRH 처리법은 93.1%(216/232)로 효율이 가장 높았다. 4. 발정유기방법별 1회 수정수태율은 PGF$_2$$_{\alpha}$ 2회 투여법 55.1%(64/l16), PRID 삽입법 54.0%(20/37), CIDR 삽입법 58.6%(17/29), 일괄수태법 58.8%(60/102)로 나타났고, 수태율은 각각 75%(87/116), 81%(30/37), 89.6%(26/29), 91.1%(93/102)였다. 5. 일괄수태 처리후 수정시점에 따른 수태율은 최종 GnRH 투여후 16~20 시간구가 65.3%로 가장 좋았다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.286-286
• /
• 2015

하천과 해양에서 발생한 수질오염은 특성상 유속의 흐름에 따라 광범위하며 급속도로 퍼져나가기 때문에 이를 효율적으로 유지, 관리하기 위해서는 오염인자들에 대한 모니터링이 수행되어야 한다. 원격탐사 기술을 이용한 하천의 수질측정은 대규모지역으로 분포해있는 수질농도의 변화양상을 시 공간적으로 모니터링 하는 것이 가능하게 할 뿐 아니라, 사람이 접근하기 어려운 지역에는 직접취수를 하지 않음으로써 기존의 수질측정방법들에 비해 편의성을 높여 시간적, 경제적 측면에서 효율적이다. 이에 본 연구에서는 최근 수질오염이 심화되고 있는 낙동강유역을 대상으로 인공위성 이미지영상을 이용하여 수질인자들의 농도측정을 수행하였다. 연구를 위해 사용된 인공위성은 NASA와 USGS가 공동으로 운용중인 Landsat 8 인공위성이다. Landsat 8의 11개 band 중 band2(Blue), band3(Green), band4(Red), band5(Near Infrared)를 사용하여 실제로 측정된 지점자료와 인공위성자료간의 상관관계를 규명하였다. 사용된 인공위성자료는 지점자료 날짜를 포함하는 총 4개의 연구날짜(2013/10/27, 2013/11/12, 2014/04/14, 2014/05/16)에 해당하는 위성이미지영상이다. Pearson상관계수를 통한 밴드와 수질인자간의 상관 결과, 본 연구지역에서는 $0.85-0.88{\mu}m$(band5)의 파장영역에서 클로로필-a와 부유물질이 가장 민감하게 반응함을 알 수 있었다. 두 수질인자들은 band2, band3, band4에서도 비교적 높은 상관성을 보였으며, 이를 근거로 band combination, band ratio를 통해 클로로필-a와 부유물질의 회귀모델식을 유도하였다. 각각의 회귀모델식은 실제 측정된 데이터들과 비교 검증을 통해 4개의 연구기간 중 2013년 10월 27일, 2014년 5월 16일에 대해서 클로로필-a와 부유물질의 공간적인 분포양상을 시각적으로 도시화하였다.