• 유공압시스템학회논문집
• /
• 제8권4호
• /
• pp.17-23
• /
• 2011

Proportional control solenoid is a type of modulating valve that can continuously control the valve position with magnetic force of solenoid. Recent microcontroller based digital servocontroller for proportional valve is being developed toward the smart valve with additional features such as enhanced control algorithm for finer process and intelligent on-board diagnosis for maintenance. In this paper, development of servocontroller network control with CAN bus which is free from problems of security and network traffic jam is presented. Design of network control system includes modes of communication between master and slave, assignment of 29bit message identifier and message objects, transaction of communication sequence, etc. Monitoring function and control experiments for remote valve through CAN network prove the extended function of smart valve control system.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.711-716
• /
• 2003

This study considers the implementation issues of the inter-vehicle communication system for the vehicle platoon experiments via a testbed. The testbed, which consists of three scale vehicles and one RCS(remote control station), is developed as a tool for functions evaluation between simulation studies and full-sized vehicle researches in the previous study. The cooperative communication of the vehicle-to-vehicle or the vehicle-to-roadside plays a key role for keeping the relative spacing of vehicles small in a vehicle platoon. The static platoon control, where the number of vehicles remains constant, is sufficient for the information to be transmitted in the suitably fixed interval, while the dynamic platoon control such as merge or split requires more flexible network architecture for the dynamical coordination of the communication sequence. In this study, the wireless communication device and the reliable protocol of the flexible network architecture are implemented for our testbed, using the low-cost, ISM band transceiver and the 8-bit microcontroller.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.600-602
• /
• 1996

The purpose of this paper is to develop a new maximum power point tracking(MPPT) using fuzzy set theory for air conditioning system. Fuzzy algorithm based on linguistic rules describing the operator's control strategy is applied to control step-up chopper for MPPT. Fuzzy algorithm is applied to control boost MPPT converter by temperature compensation effect with 8 bit single chip 8051 microcontroller. In this paper, temperature compensation(Becom Transducer : pf-T type) range is $-40^{\circ}C{\sim}+100^{\circ}C$.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.1161-1164
• /
• 1992

In this paper demonstrates the possibiity of utilising clamped mode - series resonant converter technology in the high frequency link inverter configuration. Main circuit of the proposed inverter is analyzed through circuit analys and waveform simulation. In control circuit PLL circuit and 8 bit single chip microcontroller is adopted, therefore flexibility and accuracy of control circuit is increased.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1997년도 춘계학술대회
• /
• pp.330-333
• /
• 1997

In this paper, we designed a low power and small-sized, light weighted intelligent ambulatory monitoring system using a flash memory card. The system's hardware specifications are as follows: 2 channels, 8bit/250Hz sampling rate, 20M byte storage capacity, a single-chip microcontroller (68HC11E9). To easily interface with PC based system, FFS(Flash File System) was used. We obtained the QRS detection rate of 99.14 through the evaluation with MIT/BIH database.

• 태양에너지
• /
• 제18권1호
• /
• pp.27-34
• /
• 1998

태양광 발전 시스템의 운용에 있어서 부하의 변동, 일사량, 주변온도등에 의한 최대전력점의 추종은 매우 어려운 기술을 요구한다. 본 연구에서는 이러한 최대전력점의 추종에 있어 빠른 수렴 특성을 얻기 위한 알고리즘으로써 신경 제어기법을 이용하여서 기존의 제어 방식에 의한 동특성과 비교하여 적절한 제어기법 및 시스템동작의 우수한 특성을 얻게 되었다. 즉 최대전력점의 추종 및 안정한 전원의 공급을 갖게되었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.472-472
• /
• 2000

An analog signal conditioner using fuzzy logic technique, which has multiple-input and multiple-output terminals, is proposed in this paper. The proposed signal conditioner can be employed to linearly translate the level of signals to a standard voltage signal (1-5V) and convert the form of signals to a standard current signal (4-20mA). The implementation method based on the use of a commercial 8-bit microcontroller, the analog-to-digital (A/D) converters, the digital-to-analog (D/A) converters and the voltage-to-current (V/I) converter. The simulation result and the experimental results are presented, which further confirm the feasibility of this approach.

• 제어로봇시스템학회논문지
• /
• 제13권12호
• /
• pp.1160-1166
• /
• 2007

This paper presents the design and implementation of an embedded image stabilization control system for a mobile phone with a built-in camera. Image stabilization is a family of techniques for reducing image blur resulting from minute camera shake due to hand-held shooting, thereby allowing the use of shutter speeds slower than values normally required to obtain sharp images. A mechanical image stabilizer mechanism developed for a camera mobile phone is introduced and a digital control system as a part of the image stabilization system is designed and implemented on an 8-bit microcontroller with integer arithmetic in C. This paper focuses primarily on issues that need to be taken into consideration for fixed-point implementation of the digital controller. Several experimental results are presented to demonstrate the performance of the implemented image stabilization control system.

• International Journal of Computer Science & Network Security
• /
• 제23권6호
• /
• pp.84-90
• /
• 2023

In this article the problem of computing floating-point reciprocal cube root functions is considered. Our new algorithms for this task decrease the number of arithmetic operations used for computing $1/{\sqrt[3]{x}}$. A new approach for selection of magic constants is presented in order to minimize the computation time for reciprocal cube roots of arguments with movable decimal point. The underlying theory enables partitioning of the base argument range x∈[1,8) into 3 segments, what in turn increases accuracy of initial function approximation and decreases the number of iterations to one. Three best algorithms were implemented and carefully tested on 32-bit microcontroller with ARM core. Their custom C implementations were favourable compared with the algorithm based on cbrtf(x) function taken from C ＜math.h＞ library on three different hardware platforms. As a result, the new fast approximation algorithm for the function $1/{\sqrt[3]{x}}$ was determined that outperforms all other algorithms in terms of computation time and cycle count.

• 조명전기설비학회논문지
• /
• 제22권10호
• /
• pp.1-7
• /
• 2008

본 논문에서는 무선랜을 활용하여서 이동성과 유니버스가 크게 증가하고 다양한 조명연출이 가능한 새로운 WDMX 제어기를 제안, 설계, 및 구현한다. 먼저 DMX 프로토콜이 8비트 마이크로콘트롤러를 사용하여 구현한다. 그리고 DMX 프로토콜과 802.11b 무선랜 기반 프로토콜 스택간의 프로토콜 변환 방법을 제안하고 구현한다. 끝으로 개발된 WDMX 제어기를 검증하기 위하여 상업용 DMX 장비와 연계시험을 실시하며, 최대 9,999 슬레이브를 초당 30번 refresh 할 수 있는 다양한 조명효과의 가능성을 보여준다.