• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 2001년도 추계학술대회 논문집
• /
• pp.233-238
• /
• 2001

The mechanism design of the interactive emotional robot has been carried out. The two-wheeled inverted pendulum type mechanism was adopted to improve the mobility and make the innate clumsy monoaxial bicycle motion. Even though the system is unstable in itself, it is expected for the robot to move freely in a plane, keeping the upright position only with two wheels. Two motors attached on head can make 4 motion sets, and two motors on the wheels can make 8. Therefore, 32 independent motion sets can be achieved from the robot to communicate the emotions with humans. The motion's equation of the robot was derived based on nonholonomic dynamics, and the necessary power to the wheel's rotational axis was found by simulation.

• 한국지능시스템학회논문지
• /
• 제13권1호
• /
• pp.70-75
• /
• 2003

기존 이동로봇의 활발한 연구와 더불어 다양한 형태의 이동로봇이 등장하였다. 이에 본 논문에서는 8축으로 구성된, 총 16 Degree Of Freedom을 가지는 다 관절 뱀 로봇을 제작하였다. 뱀 로봇은 지면과의 진행 마찰력을 고려하여 무동력 바퀴를 사용하였다. 또한 PC Cam과 초음파 센서를 사용하여 각 관절이 움직일 수 있는 Joint Angle을 나타내기 위하여 Target의 색상과 거리를 입력으로 하였다. 뱀 로봇은 머리부분, 몸통 그리고 꼬리부분으로 나뉘어 진행하는 방식을 가지며 PC Cam 을 통해 화면에 보여지는 움직이는 특정 목표물에 대하여 진행을 하며, 진행 중 움직이거나 고정되어있는 Obstacle이 포착될 경우 충돌회피를 통하여 Target을 추종하는 방식을 실험적으로 보이고자 한다.

• 로봇학회논문지
• /
• 제8권4호
• /
• pp.247-255
• /
• 2013

This paper shows the development of a snake robot (KAEROT-snake V) which consists of 16 1-DOF actuator modules and head module. The modules are connected serially and the joint axis of each module is rotated by $90^{\circ}$ with respect to the previous joint so that the snake robot can move in the 3D space. A tail actuator module includes slip-ring and metal connector. KAEROT-snake IV developed in prior research could move in the 3D space and climb up in a narrow pipe. But its design was not appropriate to the unstructured tough environment and its speed was somewhat slow. A new actuator module is designed to enclose all parts of the module so that any wire is not exposed. The size and weight of the new module was slightly reduced. And the rotation speed and torque of the joint was increased by about twice when compared with pre-module. An embedded controller was developed so small that it can be mounted inside the module. The performance of the developed robot was demonstrated through various locomotion experiments.

• Smart Structures and Systems
• /
• 제8권1호
• /
• pp.39-52
• /
• 2011

We are developing a biomimetic robot based on the Sea Lamprey. The robot consists of a cylindrical electronics bay propelled by an undulatory body axis. Shape memory alloy (SMA) actuators generate propagating flexion waves in five undulatory segments of a polyurethane strip. The behavior of the robot is controlled by an electronic nervous system (ENS) composed of networks of discrete-time map-based neurons and synapses that execute on a digital signal processing chip. Motor neuron action potentials gate power transistors that apply current to the SMA actuators. The ENS consists of a set of segmental central pattern generators (CPGs), modulated by layered command and coordinating neuron networks, that integrate input from exteroceptive sensors including a compass, accelerometers, inclinometers and a short baseline sonar array (SBA). The CPGs instantiate the 3-element hemi-segmental network model established from physiological studies. Anterior and posterior propagating pathways between CPGs mediate intersegmental coordination to generate flexion waves for forward and backward swimming. The command network mediates layered exteroceptive reflexes for homing, primary orientation, and impediment compensation. The SBA allows homing on a sonar beacon by indicating deviations in azimuth and inclination. Inclinometers actuate a bending segment between the hull and undulator to allow climb and dive. Accelerometers can distinguish collisions from impediment to allow compensatory reflexes. Modulatory commands mediate speed control and turning. A SBA communications interface is being developed to allow supervised reactive autonomy.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제8권3호
• /
• pp.185-191
• /
• 2008

In this paper, experimental studies of a neural network (NN) control technique for non-model based position control of the x-y table robot are presented. Decentralized neural networks are used to control each axis of the x-y table robot separately. For an each neural network compensator, an inverse control technique is used. The neural network control technique called the reference compensation technique (RCT) is conceptually different from the existing neural controllers in that the NN controller compensates for uncertainties in the dynamical system by modifying desired trajectories. The back-propagation learning algorithm is developed in a real time DSP board for on-line learning. Practical real time position control experiments are conducted on the x-y table robot. Experimental results of using neural networks show more excellent position tracking than that of when PD controllers are used only.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권2호
• /
• pp.288-294
• /
• 2009

The purpose of this study is manufacturing of monolithic housing for modularization of steering gear. Monolithic housing is difficult to weld with only rotation and linear motion. It is for this reason that housing of joining parts have a slope of 76.3 degrees. For this reason, welding trajectory was measured by the cooperative controled robot system, and then allowing for measured results, we developed the dedicated system. The developed system can be welded by using only 3 axises in contrast with robot system using 8 axises in housing welding. In addition, we applied CMT and laser welding device to dedicated system and as a result of experiment, sound bead and excellent roundness could be obtained.

• 제어로봇시스템학회논문지
• /
• 제6권8호
• /
• pp.703-709
• /
• 2000

This paper proposes a compliance control strategy for the robot manipulators accidentally interact-ing with an unknown environment. In this proposed method each in the diagonal stiffness matrix corre-sponding to the task coordinate in a Cartesian space is adaptively adjusted during contact along the corresponding axis based on the contact force with its environment. This method can be used for both unconstrained and constrained motions without any switching mechanism which often causes undesirable instability and/or vibrational motion of the end-effector. The experimental results show the effectiveness of the proposed method by employing a two link direct drive manipulator interacting with an unknown environment.

• 대한기계학회논문집A
• /
• 제39권8호
• /
• pp.743-749
• /
• 2015

본 논문에서는 해저보행로봇 크랩스터(CR200)의 전방 입사 조류에 대한 동적 전복안정성에 대하여 연구하였다. CR200 은 우리나라 근해 환경의 특징인 강조류 환경에서 운용될 수 있도록 설계되었고, 몸체도 유체역학적 요소를 고려하여 제작되었다. 해저보행로봇의 동적 전복안정성을 판단하기 위하여 육상보행로봇의 동적 전복안정성의 개념을 도입하여 수중환경에 맞도록 전복 판별식을 재정의하고 이를 이용해 전방 조류에 대한 동적 전복안정성을 시뮬레이션으로 해석하였다. 이를 위하여 조류속도가 변할 때 CR200 의 자세변화에 따른 유동해석 결과를 이용하였다. 또한 CR200 의 지지다리를 이동하여 전복축의 위치가 바뀌었을 경우에 대하여 해석을 수행하여 전복축의 이동에 따른 CR200 의 전복안정성 개선효과를 확인하였다.

• 한국산업융합학회 논문집
• /
• 제18권3호
• /
• pp.139-149
• /
• 2015

In this paper, we describe a new approach to perform real-time implementation of an robust controller for robotic manipulator based on digital signal processors in this paper. The Texas Instruments DSPs chips are used in implementing real-time adaptive control algorithms to provide enhanced motion control performance for dual-arm robotic manipulators. In the proposed scheme, adaptation laws are derived from model reference adaptive control principle based on the improved direct Lyapunov method. The proposed adaptive controller consists of an adaptive feed-forward and feedback controller and time-varying auxiliary controller elements. The proposed control scheme is simple in structure, fast in computation, and suitable for real-time control. Moreover, this scheme does not require any accurate dynamic modeling, nor values of manipulator parameters and payload. Performance of the proposed adaptive controller is illustrated by simulation and experimental results for robot manipulator consisting of dual arm with eight degrees of freedom at the joint space and cartesian space.

• 제어로봇시스템학회논문지
• /
• 제21권8호
• /
• pp.758-765
• /
• 2015

This paper proposes an attitude control system to keep the balance for a two-wheeled mobile manipulator which consists of a mobile platform and a three D.O.F. manipulator. In the conventional control scheme, complicated dynamics of the manipulator need to be derived for balancing control of a mobile manipulator. The method proposed in this paper, however, three links are considered as one body of mass and the dynamics are derived easily by using an inverted pendulum model. One of the best advantage of a sliding mode controller is low sensitivity to plant parameter variations and disturbances, which eliminates the necessity of exact modeling to control the system. Therefore the sliding mode control algorithm has been adopted in this research for the attitude control of mobile platform along the pitch axis. The center of gravity for the whole mobile manipulator is changing depending on the motion of the manipulator. And the orientation variation of center of gravity is used as reference input for the sliding mode controller of the pitch axis to maintain the center of gravity in the middle of robot to keep the balance for the robot. To confirm the performance of controller, MATLAB Simulink has been used and the resulting algorithms are applied to a real robot to demonstrate the superiority of the proposed attitude control.