• Korean Journal of Remote Sensing
• /
• v.39 no.6_1
• /
• pp.1245-1254
• /
• 2023

Significant research has been conducted on the W-band synthetic aperture radar (SAR) system that utilizes the 77 GHz frequency modulation continuous wave (FMCW) radar. To reconstruct the high-resolution W-band SAR image, it is necessary to transform the point cloud acquired from the stereo cameras or the LiDAR in the direction of 6 degrees of freedom (DOF) and apply them to the SAR signal processing. However, there are difficulties in matching images due to the different geometric structures of images acquired from different sensors. In this study, we present the method to extract an optimized depth map by obtaining 6 DOF of the point cloud using a gradient descent method based on the entropy of the SAR image. An experiment was conducted to reconstruct a tree, which is a major road environment object, using the constructed W-band SAR system. The SAR image, reconstructed using the entropy-based gradient descent method, showed a decrease of 53.2828 in mean square error and an increase of 0.5529 in the structural similarity index, compared to SAR images reconstructed from radar coordinates.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.2 s.105
• /
• pp.178-183
• /
• 2006

The proposed triple-band compact chip antenna using coupled meander line and stacked meander structure for mobile RFID/PCS/WiBro. The proposed antenna is designed to operate at 900, 1,800, and 2,350 MHz, and is realized by parasitic coupled and stacked a meander line. Meander lines are using extend length of effective current path more than monopole and contribute miniaturization. The coupled meander line controls the excitations of the mobile RFID and PCS, stacked meander line controls the excitation of the WiBro. The fabricated antenna size is $10.98{\times}22.3{\times}0.98\;mm$. The resonance frequencies are 905 MHz, 1.77 GHz and 2.32 GHz. The impedance bandwidths are 24 MHz, 140 MHz and 92 MHz. The maximum gains of antenna are 0.34 dBi, 2.58 dBi and 0.4 dBi at resonance frequencies.

• Journal of IKEEE
• /
• v.23 no.3
• /
• pp.1112-1115
• /
• 2019

This paper proposes a novel low-profile omni-directional microstrip antenna to mount on the deployable wing of the observation munition. The proposed antenna is designed on seven hexagonal resonators in a quasi-circular array to achieve a monopolar radiation pattern with a thin substrate. By employing the mesh ground structures, the resonant frequencies and impedance bandwidths of the proposed antenna is investigated. To verify the feasibility of the mesh ground structure, the thin ground wire width is investigated theoretically for improving the 3-dB fractional bandwidth, realized antenna gain and quality-factor. The proposed antenna demonstrates a good monopolar radiation in good agreement with the simulation results. The implemented prototype shows the measured bandwidth of 326 MHz with respect to 5.65% centered at 5.77 GHz and realized gain of 5.49 dBi at 5.84 GHz.

• Journal of IKEEE
• /
• v.26 no.1
• /
• pp.77-82
• /
• 2022

The effect of the bias network on the performance of the W-band power amplifier(PA) was investigated. The performances of the typical RC and radial stub networks were examined, and a hybrid network was proposed for W-band application and its performance was confirmed. To verify this, a W-band PA was designed using a 60-nm GaN pHEMT process. When hybrid networks were applied, the PA had improved stability in all frequency bands, secured about 9 dB of power gain at operating frequencies 87 GHz to 93 GHz, and the maximum PAE was found to be about 12.3% at output power of 26.7 dBm.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.3
• /
• pp.411-424
• /
• 2017

An all-digital delay-locked loop (DLL) for a mobile memory interface, which runs at 0.11-2.5 GHz with a phase-shift capability of $180^{\circ}$, has two internal DLLs: a global DLL which uses a time-to-digital converter to assist fast locking, and shuts down after locking to save power; and a local DLL which uses a phase detector with an adaptive phase sampling window (WPD) to reduce jitter accumulation. The WPD in the local DLL adjusts the width of its sampling window adaptively to control the loop bandwidth, thus reducing jitter induced by UP/DN dithering, input clock jitter, and supply/ground noise. Implemented in a 65 nm CMOS process, the DLL operates over 0.11-2.5 GHz. It locks within 6 clock cycles at 0.11 GHz, and within 17 clock cycles at 2.5 GHz. At 2.5 GHz, the integrated jitter is $954fs_{rms}$, and the long-term jitter is $2.33ps_{rms}/23.10ps_{pp}$. The ratio of the RMS jitter at the output to that at the input is about 1.17 at 2.5 GHz, when the sampling window of the WPD is being adjusted adaptively. The DLL consumes 1.77 mW/GHz and occupies $0.075mm^2$.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.11
• /
• pp.77-83
• /
• 2010

This paper presents the dual resonance PIFA(Planar Inverted F-Antenna) which satisfies the requirements of the 802.11n standard at both 2.4 GHz and 5 GHz frequency bands. Patch for 2.4 GHz and U-Type slot for 5 GHz were used for dual resonance, respectively. In this paper, the characteristics of an antenna were investigated by varying locations of short plate and feed point, the width of the short plate, the thickness and the location of U-Type slot. To investigate the characteristics of the PIFA, HFSS(High Frequency Structure Simulation) for the simulation was used. And the measurement results of a fabricated PIFA were compared with the simulated ones. The measurement and simulation results show that good dual resonance characteristics as the thickness of U-type slot decreases and when the location of U-type slot is far from the feed point.

• Information and Communications Magazine
• /
• v.32 no.3
• /
• pp.77-84
• /
• 2015

본고에서는 IEEE 802.11에서 표준화가 진행중인 1 GHz 이하 비면허 주파수에서 동작하는 무선랜(WLAN, Wireless LAN) 표준인 IEEE 802.11ah 무선랜 기술에 대해 알아본다. IEEE 802.11ah 는 스마트 그리드, 센서 네트워크, M2M(machine-to-machine) 통신, 셀룰러 오프로딩, 광역 무선랜 서비스 등을 주된 응용 분야로 고려하고 있으며 이러한 응용들은 기존 무선랜 기술대비 보다 확장된 커버리지, 보다 많은 수의 단말 지원, 저전력 동작 지원 등을 요구한다. IEEE 802.11ah는 이러한 요구 사항을 만족하기 위한 Sub 1 GHz 대역을 사용하는 무선랜 PHY 및 MAC 규격을 개발하였다. 본 고에서는 이러한 IEEE 802.11ah 무선랜의 주요 기술 요소들에 대해 살펴본다.

• Journal of electromagnetic engineering and science
• /
• v.18 no.2
• /
• pp.73-77
• /
• 2018

This paper proposes a dual-band bandpass filter using stepped-impedance resonators (SIRs) with parallel coupled structures. The proposed filter adopts U-shaped SIRs with parallel coupled lines (PCLs) that have interdigital and comb-line shorted ends. The central PCLs build an upper passband and a transmission zero, and the two U-shaped SIRs build a lower passband. Four resonators and coupling structures are theoretically analyzed to derive its scattering parameters. A novel dual-band bandpass filter is designed and fabricated using the induced scattering characteristics. The measured results show that the fabricated dual-band bandpass filter has an insertion loss of less than 1.02 dB in the lower band of 2.45 GHz and of 3.01 dB in the upper band of 3.42 GHz, and a band-to-band isolation of more than 40 dB, from 3.14 to 3.2 GHz.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.798-801
• /
• 2000

For the performance enhancement of communication system, high quality filters are required. Also a minimization of size of filter is required for the interation of devices in the limited area. Conventional metal filters made of copper can be substituted by high quality high temperature superconducting(HTS) films for better performance. Hairpin type filters have been designed with the center frequency 14 GHz for the size reduction. 3-pole and 4-pole filters centered at 14 GHz with the bandwidth of about 300 MHz were designed and fabricated. With the simulation results, the frequency responses showed low insertion loss and sharp skirts characteristics. The frequency response of HTS 14 GHz fi1ter was measured at 77 K and compared with the simulation results. We have compared YBCO filters and copper filters which were made with the same design rules. Simulated and measured frequency responses reveal that HTS YBCO hairpin type bandpass filters show better performance than copper filters.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.133.2-133.2
• /
• 2011

KVN phase Calibrator Survey(KVNCS)는 VLBI 관측 시 대기의 불규칙한 수증기 분포로 인한 visibility 위상의 불규칙한 변화를 보정하기 위해 도입되는 phase-referencing 기법 등에서 필수요소인 위상보정 calibrator를 얻기 위한 연구이다. Phase-referencing 기법을 이용하여 위상을 보정하기 위해서는 대상 천체의 근접한 곳에 비교적 compact한 calibrator가 존재해야 한다. 또한 Asaki et al.(1996)에 의하면 대기의 coherence structure가 유지되기 위해서는 두 천체가 적어도 $5^{\circ}$ 이내의 분리각을 가져야 한다. 위상보정 calibrator에 대한 연구는 주로 2, 8GHz 대역에서 진행되어 왔고 최근에는 22GHz에서 VLBI 관측이 진행되고 있지만 천구상의 특정 영역에 국한되거나 calibrator들 간의 분리각이 여전히 크다. KVNCS는 천구상에서 calibrator의 분포를 좀 더 고르게 하고 더 많은 calibrator를 얻어 적어도 $5^{\circ}$ 이내의 분리각을 구현하고자 한다. 먼저, 단일경을 이용하여 KVNCS의 대상을 확보하기위하여 이들의 플럭스를 정확히 측정하였다. 2, 8GHz 대역에서 관측된 VLBA(Very Long Baseline Array) Calibrator Survey(VCS) 목록을 기초로 power-law를 가정하여 22GHz에서 100mJy 이상일 것으로 예상되는 천체 2503개를 KVNCS 단일경 연구의 후보로 선정하였다. KVN 연세와 울산 전파망원경경을 이용하여 2009년 12월부터 2011년 3월까지 2298개의 플럭스 측정 관측을 진행하여 22GHz에서 약 77%, 43GHz에서 약 23%의 검출률을 얻었다. 또한 이 천체들의 공간분포도 $5^{\circ}$의 분리각을 만족하는 것을 확인하였다. 앞으로 KVNCS 단일경 결과를 활용하여 KVN 각 사이트의 위치 정보를 비롯하여 22GHz KVN VLBI 관측을 통해 KVN 위상보정 calibrator를 확보 할 계획이다.