• Journal of Mechanical Science and Technology
• /
• v.20 no.11
• /
• pp.1972-1979
• /
• 2006

This study was conducted in order to generate model particles which were similar to particles in diesel emission. Spark discharge was used for carbon agglomerates and hydrocarbon condensation for particles that consist of carbon agglomerates and hydrocarbon. The size of the carbon agglomerates, whose mean size were 30 and 70 nm, ranged between 15 and 200 nm, and the total number concentration of the particles ranged from 3 to $5{\times}10^7#/cm^3$ as the controllable variables in spark discharge generator changed. The result of the hydrocarbon condensation experiment showed that the final sizes of the particles enlarged by condensation did not depend on the initial sizes, but the maximum condensational growth of carbon agglomerates by dodecane ($C_{12}H_{26}$) condensation was 112 times the initial size of 40 nm, while the size of the agglomerates by benzene ($C_6H_6$) was 3.25 times its initial size.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.10a
• /
• pp.705-712
• /
• 2002

Geotextile tube is environmentally sustainable technology and has been applied in hydraulic and coastal engineering applications. Geotextile tube is composed in permeable fabrics and Inside dredged materials, and hydraulically or mechanically filled with dredged materials. These tube are generally about 1.0m to 2.0m in diameter, through they can be sized for any application. The tubes can be used solely, or stacked to add greater height and usability. Stacked geotextile tubes will create by adding the height necessary for some breakwaters and embankment, therefore increasing the usability of geotextile tubes. This paper presents the hydrodynamic behavior of stacked geotextile tube by hydraulic model tests. The hydraulic model test conducted by structural condition and wave conditions. Structural condition is installation direction to the wave(perpendicular band 45$^{\circ}$), and wave condition is varied with the significant wave height ranging from 3.0m to 6.0m. Based on the test results, the hydrodynamic behaviors such as structural stability, wave control capacity, and strain are interpreted.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.18 no.6
• /
• pp.30-37
• /
• 1981

Numerical calculations have beee made of the effect of grain size on the three-dimensional carrier density, the quantum efficiency, and the AMI efficiency of 30$\mu$m polycrystalliue silicon p-n junction solar cells. Quantum efficiencies calculated for the polycrystalline silicon solar cells are compared to the monocrystalline cases. An efficiency of 12% can theoretically be obtained with grain size 100$\mu$m, and 6% for 5$\mu$m grains.

• Journal of the Korean Solar Energy Society
• /
• v.27 no.3
• /
• pp.117-125
• /
• 2007

This study proposes a CFD(Computational Fluid Dynamics) analysis as a method of verification of the designed-data and a supplement of the insufficient experiences in geothermal system, which shows a rapid growth among the renewable energies. The followings are the results. FLUENT 6.2.12 is used as a CFD tool on this study, with the equations of continuity, motion, energy for unsteady flow through pipes and k-epsilon turbulent model. S-type model which has one borehole with diameter 12m by depth 206m and T-type model which has 3 boreholes with $12m{\times}20m{\times}206m$ are proposed, and also the boundary conditions are described. The temperature differences between temperatures by CFD analysis and by on-site measurement are less than 1.5%, this shows a high reliability of CFD analysis process which this study proposes. After 11 days simulation operated 12 hours interval On/Off mode, it is clearly predicted that the outlet temperatures of geothermal pipes are increased by $1.2^{\circ}C$, and $2.2^{\circ}C$ after 4 months. And the outlet temperatures of geothermal pipes increased with increase of the mass flow rates through the pipes. T-type model shows that the 4m distance between boreholes are reasonable because the temperatures at 2m and 6m from boreholes are nearly same.

• Journal of the Korean Chemical Society
• /
• v.55 no.6
• /
• pp.1024-1029
• /
• 2011

PVA/silica hybrid xerogels were synthesized by sonohydrolysis of a mixture of 2-way catalyzed TEOS and water solution of PVA. PVA was successfully removed from the xerogels through calcination and its removal was confirmed through TGA analysis of the calcined gel. Microstructure of the gels was studied through SEM, XRD and FTIR. Nitrogen sorption studies were conducted to find out surface area of different samples. It was found out that the samples having PVA removed through calcinations have higher surface area (411.64 $m^2$/g) than the samples (353.544 $m^2$/g) synthesized without any PVA. Adsorption properties of these xerogels synthesized by using different ratios of components were studied by taking Rhodamine G6 as a model adsorbate. The experiments were conducted at room temperature ($25^{\circ}C$). UV visible spectroscopy was used to measure the concentration of the dye before and after adsorption. The adsorption data of Rhodamine G6 on PVA modified silica is described by the Freundlich's adsorption model.

• Journal of Korean Society for Atmospheric Environment
• /
• v.33 no.2
• /
• pp.159-173
• /
• 2017

The Weather Research and Forecast (WRF) - Community Multiscale Air Quality (CMAQ) system was applied to investigate the influence of major point sources located in Chungcheongnam-do (CN) on surface $PM_{2.5}$ (Particulate Matter of which diameter is $2.5{\mu}m$ or less) concentrations in its surrounding areas. Uncertainties associated with contribution estimations were examined through cross-comparison of modeling results using various combinations of model inputs and setups; two meteorological datasets developed with WRF for 2010 and 2014, and two domestic emission inventories for 2010 and 2013 were used to estimate contributions of major point sources in CN. The results show that contributions of major point sources in CN to annual $PM_{2.5}$ concentrations over Seoul, Incheon, Gyeonggi, and CN ranged $0.51{\sim}1.63{\mu}g/m^3$, $0.71{\sim}1.62{\mu}g/m^3$, $0.63{\sim}1.66{\mu}g/m^3$, and $1.04{\sim}1.86{\mu}g/m^3$, respectively, depending on meteorology and emission inventory choice. It indicates that the contributions over the surrounding areas can be affected by model inputs significantly. Nitrate was the most dominant $PM_{2.5}$ component that was increased by major point sources in CN followed by sulfate, ammonium, and others. Based on the model simulations, it was estimated that primary $PM_{2.5}$ $(PPM)-to-PM_{2.5}$ conversion rates were 41.3~50.7 ($10^{-6}{\mu}g/m^3/TPY$) for CN, and 12.4~18.3 ($10^{-6}{\mu}g/m^3/TPY$) for Seoul, Incheon, and Gyeonggi, respectively. In addition, spatial gradients of PPM contributions show very steep trends. $NO_X$-to-nitrate conversion rates were 7.61~12.3 ($10^{-6}{\mu}g/m^3/TPY$) for CN, and 3.94~11.3 ($10^{-6}{\mu}g/m^3/TPY$) for the sub-regions in the SMA. $SO_2$-to-sulfate conversion rates were 4.04~5.28 ($10^{-6}{\mu}g/m^3/TPY$) for CN, and 3.73~4.43 ($10^{-6}{\mu}g/m^3/TPY$) for the SMA, respectively.

• Journal of Microbiology and Biotechnology
• /
• v.33 no.9
• /
• pp.1238-1249
• /
• 2023

In this study, we sought to investigate the production and optimization of biosurfactants by soil fungi isolated from petroleum oil-contaminated soil in Saudi Arabia. Forty-four fungal isolates were isolated from ten petroleum oil-contaminated soil samples. All isolates were identified using the internal transcribed spacer (ITS) region, and biosurfactant screening showed that thirty-nine of the isolates were positive. Aspergillus niger SA1 was the highest biosurfactant producer, demonstrating surface tension, drop collapsing, oil displacement, and an emulsification index (E₂₄) of 35.8 mN/m, 0.55 cm, 6.7 cm, and 70%, respectively. This isolate was therefore selected for biosurfactant optimization using the Fit Group model. The biosurfactant yield was increased 1.22 times higher than in the nonoptimized medium (8.02 g/l) under conditions of pH 6, temperature 35℃, waste frying oil (5.5 g), agitation rate of 200 rpm, and an incubation period of 7 days. Model significance and fitness analysis had an RMSE score of 0.852 and a p-value of 0.0016. The biosurfactant activities were surface tension (35.8 mN/m), drop collapsing (0.7 cm), oil displacement (4.5 cm), and E₂₄ (65.0%). The time course of biosurfactant production was a growth-associated phase. The main outputs of the mathematical model for biomass yield were Yx/s (1.18), and µ_max (0.0306) for biosurfactant yield was Y_p/s (1.87) and Y_p/x (2.51); for waste frying oil consumption the So was 55 g/l, and Ke was 2.56. To verify the model's accuracy, percentage errors between biomass and biosurfactant yields were determined by experimental work and calculated using model equations. The average error of biomass yield was 2.68%, and the average error percentage of biosurfactant yield was 3.39%.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.3
• /
• pp.194-201
• /
• 2017

The KARI-11-180 airfoil was selected as a model for EFD-CFD comparison workshop case 1. Wind tunnel test for this model was conducted in KARI low speed wind tunnel with $0.6m{\times}3.0m$ model for the Reynolds number up to 3.0E6. The model configuration and wind tunnel test results including Cl, Cd and Cp were released at the KSAS 2015 spring conference. The computational analysis results with KFLOW, FLUENT and STAR-CCM+ were present in the KSAS 2015 fall conference. These computational works were summarized in this paper and the comparison results with each others including the wind tunnel data were also summarized.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.6
• /
• pp.60-66
• /
• 2021

The core is extracted through drilling and used to evaluate the feasibility of developing mineral resources. To extract the core, a bit is installed in the forefront of the drilling device for drilling. Here, the drill bit receives stress due to direct friction against the ground. In addition, a bit appropriate for the given ground condition should be used due to the possibility of damaging a bit as a result of friction. This paper used a current bit model based on an impregnated bit and analyzed a new bit model that uses a stiffener of similar/disparate materials. The hardness and deflective strength were then evaluated by modeling the shape of impregnated bit through a calculation based on a theoretical formula. Through FEM analysis of the existing model and the new model, the stress and strain calculation results were optimized to minimize the stress and strain with a stress of 1.92 × 107 Pa and a strain of 9.6× 10-5 m/m.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.445-445
• /
• 2022

최근 새만금 방조제 건설이 완료됨에 따라 주변 연안지역의 지형에 많은 변화가 감지되었다. 본 연구대상지는 격포해수욕장으로서 새만금 사업 준공 후 연안침식에 따른 모래 유실 등으로 인해 양빈사업 등이 검토되고 있는 상황이다. 본 연구에서는 연안지형 변화 탐지를 위한 UAV (Unmanned Aerial Vehicle) 활용기술을 제시하는 것으로서 총 3회에 걸쳐 UAV 영상을 촬영하였다. 영상촬영은 DJI Inspire 2 UAV를 활용하였으며 VRS(Virtual Reference Service) 측량성과와 연계하여 Pix4D Mapper SW를 통해 정사영상과 수치표면모델(DSM; Digital Surface Model)을 제작하였다. 먼저 2018. 6. 29 ~ 2018. 12. 10 사이의 지형변화 탐지를 수행한 결과 침식과 퇴적의 최대값은 각각 2.56m와 2.24m로 나타났으며 평균적으로는 0.01m의 퇴적이 발생하였다. 그리고 2018. 6. 29 ~ 2019. 6. 14 동안의 침식과 퇴적의 최대값은 각각 2.31m와 2.28m로 나타났으며 평균값은 0.02m의 침식이 발생하였다. 또한 2018. 12. 10 ~ 2019. 6. 14 사이에는 침식과 퇴적의 최대값이 각각 2.28m와 2.55m로 나타났으며 평균값은 0.03m의 침식이 발생하였다. 지형변화를 보다 상세히 모니터링하고자 퇴적과 침식구간을 나누어 분석을 수행한 결과, 2018. 6. 29 ~ 2018. 12. 10 사이에는 0.5m 이내의 침식과 퇴적구간 면적이 각각 13,324.4m²와 14,667.3m²로 퇴적구간의 면적이 1,342.9m² 만큼 높게 나타났으며, 2018. 12. 10 ~ 2019. 6. 14 사이에는 0.5m 이내의 침식과 퇴적구간 면적이 각각 16,176.6m²와 11,723.0m²로 침식구간의 면적이 4,453m² 만큼 높게 나타났다. 또한 2018. 12. 10 ~ 2019. 6. 14 사이에는 0.5m 이내의 침식과 퇴적구간 면적이 각각 16,821.6m²와 11,126.4m²로 침식구간의 면적이 5,695.2m² 만큼 크게 분석되었다. 이와 같이 UAV 영상 기반의 연안지형 모니터링을 수행할 경우 시계열 지형변화를 효과적으로 모니터링할 수 있으며, 이러한 업무는 새만금 방조제 건설에 따른 지형변화의 영향평가 등 다양한 연안업무에 활용될 수 있을 것이다.