• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.41 no.6
• /
• pp.1-10
• /
• 2004

A haptic rendering system is proposed for a puncture task of a virtual vertebra model. To build a mesh model from medical images, Delaunay triangulation is applied and physical models are based on elasticity theory. Also, a redundant actuated 6 DOF parallel type haptic device is designed to display large force and to resolve the singularity problem of parallel type mechanisms. Haptic feeling of puncture task and the performance of the proposed haptic device are tested by two puncture task experiments.

• Proceedings of the KIEE Conference
• /
• 1999.07b
• /
• pp.569-572
• /
• 1999

This paper presents a method for designing an autopilot of the BTT missile using 2DOF Wiener-Hopf control technique to improve tracking performance. Linear controllers are designed based on the linearized models which are obtained from the nonlinear missile dynamic equations at various operating points. The gain scheduling technique is used to implement the final autopilot. A simulation on the flight of missiles is carried out through the use of 6DOF equation program including exact nonlinear equations of the missile and the variations of aerodynamic variables in order to check applicability of the suggested method in real situation.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.302-305
• /
• 2003

In this paper, dynamic behaviors of a small-sized flying robot with 4 rotors propelled by DC motor are discussed, and a control scheme based on the dynamic model to make stable flying motions, i.e., hovering, take-off, cruising behavior, etc. is proposed. The experimental results via some flying tests show good performances for practical use. The flying robot with 6DOF is controlled only 4 DOF, and the rest of two DOF are remained under the dynamic constraints. How to give the stability of all positions and orientations and to make the omni-directional motions in spite of such restrictions is analyzed. The proposed control scheme composes of two stages. First, PD control inputs for the trust-force and orientation are calculated, next the control inputs are distributed to each rotor by using a sort of Jacobian matrix. To design and control of a low cost - small sized flying robot, vibrated gyro sensor, cheap accelerometer, IR, and ultra sonic sensors are selected.

• Journal of Biosystems Engineering
• /
• v.25 no.2
• /
• pp.141-150
• /
• 2000

This study was carried out to de develop a control strategy of a fruit harvesting redundant robot. The method of generating a safe trajectory, which avoids collisions with obstracles such as branches or immature fruits, in the 3D(3-dimension) space using artificial potential field technique and virtual plane concept was proposed. Also, the method of setting reference velocity vectors to follow the trajectory and to avoid obstacles in the 3D space was proposed. Developed methods were verified with computer simulations and with actual robot tests. Fro the actual robot tests, a machine vision system was used for detecting fruits and obstacles, Results showed that developed control method could reduce the occurrences of the robot manipulator located in the possible collision distance. with 10 virtual obstacles generated randomly in the 3 D space, maximum rates of the occurrences of the robot manipulator located in the possible collision distance, 0.03 m, from the obstacles were 8 % with 5 degree of freedom (DOF), 8 % with 6-DOF, and 4% with 7-DOF, respectively.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.2
• /
• pp.192-198
• /
• 2013

This paper presents the stabilization and design of a pan-tilt control part for the directional pan-tilt system for shipboard directional equipment. In order to control each control axis with compensation for ship motion, the 2 degree of freedom(2DOF) PID controller is designed and its parameters are tuned using a real-coded genetic algorithm(RCGA). Simulation demonstrates the effectiveness of the 2 DOF PID controller tuning.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.14 no.6
• /
• pp.52-60
• /
• 2005

Ultra-precision positioning systems basically require high natural frequency and sufficient workspace. To cope with this requirement, flexure hinge mechanisms have been developed. However, previous designs are difficult to satisfy the functional requirements of the system due to difficulty in modeling and optimization process applying fur the independent axiomatic design. Therefore, this paper suggests a new design and design procedure based on semi-coupled, axiomatic design. A spatial 3-DOF parallel type micro mechanism is chosen aa an exemplary device. Based on preliminary kinematic analysis and dynamic modeling of the system, an optimum design is conducted. To check the effectiveness of the optimal parameters obtained by theoretical approach, simulation has been performed by FEM.

• Journal of Mechanical Science and Technology
• /
• v.20 no.6
• /
• pp.828-839
• /
• 2006

In this paper, a 2-DOF planar parallel manipulator with two revolute actuators and one passive constraining leg. The kinematic analysis of the mechanism is analytically performed : the inverse and forward kinematics problems are solved in closed forms, the workspace is derived systematically, and the three kinds of singular configurations are round. The optimal design to determine the geometric parameters and the operating limits of the actuated legs is performed considering the kinematic manipulability and workspace size. These results of the paper show the effectiveness of the presented manipulator.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2020.11a
• /
• pp.263-266
• /
• 2020

사용자에게 본인이 원하는 시점과 시각을 선택할 수 있도록 하는 자유시점 (Free Viewpoint) MPEG-I 과제를 통하여 3DOF, 3DOF+, 6DOF의 표준을 개발 중이다. 실사 영상의 자유시점 영상을 구현하는 방법으로는 깊이정보를 사용한 렌더링 기법을 사용하는데, 이를 실시간 재생할 수 있는 시스템은 개발되지 않았다. 본 논문에서는 PC 사양에서 NVIDIA 영상 코덱과 OpenGL사용하는 rtRVSlibrary를 바탕으로, 최대 8개의 HD급 다중 뷰 영상 입력 (컬러+깊이)을 자유 시점을 실시간 생성하여 디스플레이하는 재생기를 설계 및 개발하였다. 사용자는 원하는 시점으로 상하좌우앞뒤(회전)로 자유롭게 이동할 수 있으며, 계산양과 화질 효율성을 고려하여 디코딩한 입력영상 중에 두 개의 시점을 선별하는 알고리즘을 개발하여 실시간 동작 (25fps)을 검증하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.78.1-78
• /
• 2002

A quantitative performance evaluation of an intuitive robot teach method is presented. $\textbullet$ Teach times for two types of teach tasks are compared to the conventional teach pendant method. $\textbullet$ Teach tasks requiring a 4 DOF motion and a 6 DOF motion were tested. $\textbullet$ Compared to the teach pendant method, the proposed method reduce the teach times to 75% and 55%. $\textbullet$ The intuitive teach method is easier for the untrained robot users.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1998.10a
• /
• pp.19-26
• /
• 1998

The isoparametric spline finite strip method for degenerated shells is presented. In the formulation, both the geometry and the displacement field are represented by uniform cubic B-spline curves. Spline shell strip is degenerated stress-resultant shell with 6 dof at each node;and the penalty function method is used to incorporated the six dof,