• Korean Journal of Environmental Agriculture
• /
• v.25 no.1
• /
• pp.1-6
• /
• 2006

This study was carried out to investigate yearly change in the precipitation component and the source strength to acid precipitation at Iksan area from 1997 to 2003. The average ratio of acid precipitation was 70.0% in 1997, 56.3% in 1998 and 36.4% in 2003. On the other hand, it ranged from 6.9 to 19.2% when precipitation was less from 1999 to 2002. The average annual wet depositions of major ionic component in precipitation were calculated by multiplying equivalent concentration by precipitation. The order of major anion component in precipitation was ${SO_4}^{2-}>Cl^->{NO_3}^-$. On the other hand, the concentration of cation component were ${Ca_2}^+>Na^+>{NH_4}^+>{Mg_2}^+>K^+$ in order. The negative correlation was shown between pH and ionic component in precipitation except for ${Ca_2}^+\;and\;Na^+$. The correlation coefficient between pH and ${SO_4}^{2-}$ was highly significant as -0.508, which suggests that ${SO_4}^{2-}$ played important role in increasing the acidity of precipitation. Also the anions such as ${SO_4}^{2-}\;and\;{NO_3}^-$ were highly significant with cations such as ${Ca_2}^+,\;{Mg_2}^+,\;K^+,\;{NH_4}^+\;and\;Na^+$. As a result though pH was enable to use the acidity index of precipitation in somewhere, evaluating only pH in precipitation was insufficient as the index to establish corresponding strategy for acid rain.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.4
• /
• pp.525-531
• /
• 2018

This paper proposes a bi-component dye, including the unripe fruit of Diospyros kaki THUNB and Ecklonia cava, to substitute for traditional persimmon dyeing because fabrics dyed with persimmon juice become stiffer and natural persimmon is insufficient for dyeing. This study examined the color difference and fabric stiffness depending on the ratio of Ecklonia cava for in a one-bath dye solution with Diospyros kaki THUNB and showed that 6% of Ecklonia cava in the bi-component dye was the optimum for decreasing the fabric stiffness. Based on these results, a bi-component dye constituting of 94% Diospyros kaki THUNB and 6% Ecklonia cava was prepared. The particle size was found to be smaller than both single dyes and it maintained a similar amount of Catechin to Diospyros kaki THUNB dye. Finally, cotton fabric dyed with a bi-component dye was much improved in terms of the fabric hand and the surface color was similar to that of the traditional persimmon-dyed fabric. These results could help to develop the natural persimmon dyeing industry.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.12
• /
• pp.825-830
• /
• 2014

$[(Co_{1-x}Cu_x)_{0.2}(Ni_{0.3}Mn_{0.7})_{0.8}]_3O_4$ ($0{\leq}x{\leq}1$) thin films prepared by metal organic decomposition process were fabricated on SiN/Si substrate for infrared sensor application. Their structural and electrical properties were investigated with variation of Cu dopant. The $[(Co_{1-x}Cu_x)_{0.2}(Ni_{0.3}Mn_{0.7})_{0.8}]_3O_4$ (CCNMO) film annealed at $500^{\circ}C$ exhibited a dense microstructure and a homogeneous crystal structure with a cubic spinel phase. Their crystallinity was further enhanced with increasing doped Cu amount. The 120 nm-thick CCNMO (x=0.6) thin film had a low resistivity of $53{\Omega}{\cdot}cm$ at room temperature while the Co-free film (x=1) showed a significantly decreased resistivity of $5.9{\Omega}{\cdot}cm$. Furthermore, the negative temperature coefficient of resistance (NTCR) characteristics were lower than $-2%/^{\circ}C$ for all the specimens with $x{\geq}0.6$. These results imply that the CCNMO ($x{\geq}0.6$) thin films are a good candidate material for infrared sensor application.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.05a
• /
• pp.35-42
• /
• 1996

In this Paper, optical absorption were performed on LB films of binary mixtures of three kinds of merocranine dyes DO, DS, and 6Me-BS, where DS and 6Me-DS form J-like aggregates but not DO in single component films. The observed optical absorption spectra of mixed films were markedly defendent on the combination of dyes. [6Me-DS]$\sub$1-x/[DOl]$\sub$x/ LB films show a sharp red shifted J-like band peak in the whole concentration range. We found the formation of f aggregates in a mixed merocyanine dyes containing a non J-aggregate forming dye DO, in a single component case. Farther investigations on the present and other mixed-dye films will be needed to clarify these points.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.33 no.3
• /
• pp.106-111
• /
• 1984

Prebreakdown current pulses arising from avalanche growth in SF6 were recorded under static uniform field at pressures up to about 400kpa. At pressures less than 100kpa the current pulses consist of the electron component observed as the fast rise of current, the negative ioncomponent which is superimposed, and the positive ion component comprising the tail of the pulse. The values of positive ion drift velocity were measured from the present pulse data. At pressures in excess of about 100 Kpa the pulse shapes becam distorted such that quantitative analysis was no longer possible, and did not indicate the action of any photosecondary process at the cathode. Breakdown appers to result from the seperate development of single avalanche.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.152-153
• /
• 2006

We demonstrate the methodology of engineering the multi-component ceramic nanopowder with precise morphology by nanoblast calcinations decomposition of preliminary engineered nanoreactors. Multiple explosions of just melted $C_3H_6N_6O_6$ embedded into preliminary engineered nanoreactors break apart the agglomerates due to the highly energetic impacts of the blast waves. Also, the solid-solubility of one component into the other is enhanced by the extremely high local temperature generated during each nano-explosion in surrounding area. This methodology was applied for production of agglomeratefree nano-aggregates of $Gd_{20}Ce_{80}O_{1.95}$ with an average size of 42 nm and $LaSrGaMgO_{3-x}$ nanopowder with an average aggregate size of 83 nm.

• Annals of Rehabilitation Medicine
• /
• v.42 no.6
• /
• pp.863-871
• /
• 2018

Objective To evaluate the association between progression of curvature of scoliosis, and correction for functional component in patients with juvenile idiopathic scoliosis (JIS). Methods We retrospectively reviewed medical data of patients prescribed custom molded foot orthosis (FO) to correct inequality of RCSPA (resting calcaneal stance position angle), and chose 52 patients (26 females, 26 males) with Cobb angle ${\geq}10^{\circ}$ in radiology and uneven pelvic level at iliac crest by different RCSPA (${\geq}3^{\circ}$) as a factor of functional scoliosis. They had different hump angle ${\geq}5^{\circ}$ in forward bending test, for idiopathic scoliosis component. Their mean age and mean period of wearing FO were $79.5{\pm}10.6months$ and $18.6{\pm}0.70months$. Results Cobb angle was reduced from $22.03^{\circ}{\pm}4.39^{\circ}$ initially to $18.86^{\circ}{\pm}7.53^{\circ}$ after wearing FO. Pelvis height difference and RCSPA difference, were reduced from $1.07{\pm}0.25cm$ initially to $0.60{\pm}0.36$, and from $4.25^{\circ}{\pm}0.71^{\circ}$ initially to $1.71^{\circ}{\pm}0.75^{\circ}$ (p<0.01). Cobb angle improved most in 9 months. However, there was no significant improvement for those with more than $25^{\circ}$ of Cobb angle initially. Mean Cobb angle improved in all age groups, but patients less than 6 years had clinically significant improvement of more than $5^{\circ}$. Conclusion JIS can have functional components, which should be identified and managed. Foot orthosis is useful in correcting functional factors, in the case of pelvic inequality caused by different RCSPA, for patients with juvenile idiopathic scoliosis.

• International Journal of Reliability and Applications
• /
• v.6 no.2
• /
• pp.117-133
• /
• 2005

Estimations of the parameters included in a two-component system are derived based on masked system life test data, when the probability of masking depends upon the exact cause of system failure. Also estimations of reliability for the individual components at a specified mission time are derived. Maximum likelihood and Bayes methods are used to derive these estimators. The problem is explained on a series system consisting of two independent components each of which has a Pareto distributed lifetime. Further we present numerical studies using simulation.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10a
• /
• pp.5-6
• /
• 2003

Kinetic study on the colloidal crystallization of single component and mixture of different sizes or densities of spheres was made in the exhaustively deionized suspensions and in microgravity, and compared with the results in normal gravity. Colloidal crystallization rates were retarded in microgravity for single component of spheres, whereas rates of alloy crystallization were enhanced substantially in microgravity. The rotational diffusion coefficients of colloids and the formation reaction rates of colloidal silica spheres were also studied in microgravity.

• Journal of Environmental Science International
• /
• v.11 no.1
• /
• pp.63-68
• /
• 2002

In this study, we examined statistical analysis between sewage plant operations parameters and effluent quality We got six components from principle component analysis of the operation parameters and secondary effluent quality. 91.8% of the total variance was explained by the six components. The components were identified in the following order : 1) organic matter removal by aeration basin microbe, 2) settleability on secondary clarifier load, 3) removal of nutrients, 4) microbial number increasement and species diversity, 5) microbial activity in aeration basin, 6) oxidation in aeration basin.