• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.6
• /
• pp.87-93
• /
• 2012

In this paper, we propose an analog-to-digital converter to set the address of a I2C slave chip. The proposed scheme converts a fixed voltage between 0 and VDD to the digital value which can be used as the address of the slave chip. The rising time and the falling time are measured with digital counter in a serially connected RC circuit, while the circuit is being charged and discharged with the voltage to be measured. The ratio of the two measured values is used to get the corresponding digital value. This scheme gives a strong point which is to be implementable all the parts except comparator using digital logic. Although the method utilizes RC circuit, it has no relation with the RC value if the quantization error is disregarded. Experimental result shows that the proposed scheme gives 32-level resolution thus it can be used to configure the address of the I2C slave chip.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.2
• /
• pp.325-329
• /
• 2011

We are developing a minimized integrated public address system that has facilities such as external input, Mic., CD, MP3 and Radio. In this paper, developing an integrated public address system with operational MICOM will make it possible to control the facilities of digital devices centrally. The operational MICOM is composed of 3 layers which are a control layer, a processing layer and a user interface layer. The control layer controls digital devices in the integrated public address and the processing layer is for processing voice data editing, controlling signals of devices and providing status information of the device. The user interface layer displays the status of control devices and the data processing of a user. A remote control is used for the central control.

• Journal of Advanced Information Technology and Convergence
• /
• v.9 no.2
• /
• pp.15-27
• /
• 2019

This paper deals with a web-based public address system for conveying information for different institutions. An architecture for a Short Messaging Service (SMS) based public address (PA) system that can be programmed by an authorized mobile phone or device is proposed. This PA system will facilitate information transfer from heads of offices, managers, directors, and deans of the institutions to its constituents or unit area as well as enable postings of information with proper authentication and validation remotely. The system supports high priority messaging, allowing the conveyance of critical and time sensitive information. The mobility management support for the PA system will be based on the Hierarchical Mobile Internet Protocol version 6 (HMIPv6), hence, allowing for a seamless connectivity to the system. The major advantage of this proposed PA system as compared with the traditional electronic displays and bulletin boards is seamless mobility wherein the display devices can be programmed remotely by heads of the institutions and business organization. It also allows faster communication and immediate actions concerning the different institutions, organizations, and businesses, thus, ensuring high productivity.

• Korean Journal of Optics and Photonics
• /
• v.5 no.4
• /
• pp.493-498
• /
• 1994

A fiber-optic matched filter with Cr/ Au film-deposited fiber-optic delay lines is fabricated for a possible application as photonic packet address detectors for an all-optical slotted ring network. Correlation waveforms for a set of 6-bit address codes with 2.5 Gb/s are produced by simulation. It is shown that the measured correlation outputs agree well with the calculated ones.d ones.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.11a
• /
• pp.537-538
• /
• 2009

IPv6 is newly introduced to solve limitations and problems of IPv4 and in IPv6 network, nodes use Neighbor Discovery protocol to discover the subnet prefix and configure its own address. However, Neighbor Discovery is vulnerable to various attacks as it does not have secure mechanism to protect itself. Thus, the Secure Neighbor Discovery has introduced and the main mechanism used in Secure Neighbor Discovery is Cryptographically Generated Address. In this paper, we provide a brief of Cryptographically Generated Address and its limitation in a case where a mobile node moves from one network to another frequently. The proposed scheme resolves this limitation by using the fixed interface identifier.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.1
• /
• pp.114-123
• /
• 2007

As a promising technology that enables ubiquitous computing and will lead the information technology industries of the next generation, the new field of sensor networks is one of the most active research topics today. From now on, each node, the network formation, and even the sensor network itself will interact with the generic network and evolve dynamically according to environmental changes, in a process of continual creation and extinction. In this paper, we propose a address-Internetworking scheme for interactive networking between a sensor network and the Internet based on the TCP port-numbers. The proposed scheme enables internetworking between a sensor network address scheme based on Zigbee and the Internet address scheme based on the Internet Protocol version 6 (IPv6). We implement the proposed address-Internetworking scheme using Berkeley TinyOS, Mica Motes, and IP. In addition we verify the proposed scheme by an interconnection experiment, which involves wireless sensor networks and the Internet, using IPv4/IPv6.

• Journal of Power Electronics
• /
• v.9 no.6
• /
• pp.884-891
• /
• 2009

An address voltage stabilization circuit for the single-side driving (SSD) method for AC plasma display panels (PDP) is proposed. The single-side driving method, which eliminates a common sustaining driver, uses only two electrodes in a three electrode AC PDP structure. The high-impedance (Hi-Z) mode operation of the data drive ICs during the sustaining period is needed for surface gas-discharge without misfiring in the SSD method but it produces the problem that the address voltage increases up to the breakdown voltage. The proposed circuit based on a flyback converter can stabilize the address voltage under the breakdown voltage and provide better surface gas-discharge performance without any misfiring in the SSD scheme.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.32B no.6
• /
• pp.849-861
• /
• 1995

In this paper, a new trace driven simulation algorithm is proposed to evaluate the bus traffic and the miss ration of the various sector cache memories, which have various sub-block sizes and block sizes and associativities and number of sets, with a single pass through an address trace. Trace-driven simulaton is usually used as a method for performance evaluation of sector cache memories, but it spends a lot of simulation time for simulating the diverse cache configurations with a long address trace. The proposed algorithm shortens the simulation time by evaluating the performance of the various sector cache configurations. which have various sub-block sizes and block sizes and associativities and number of sets , with a single pass through an address trace. Our simulation results show that the run times of the proposed simulation algorithm can be considerably reduced than those of existing simulation algorithms, when the proposed algorithm is miplemented in C language and the address traces obtained from the various sample programs are used as a input of trace-driven simulation.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.392-395
• /
• 2008

To improve the luminance in ac PDP, a new single sustain waveform with auxiliary address pulse is proposed. The new single sustain waveform was examined with 2 dimensional fluid codes and related experiments were performed with 42-inch XGA PDP module. At the same sustain level (= 180 V), the new waveform showed 3.6 times higher IR emission than the general waveform without auxiliary address pulse.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.7A
• /
• pp.688-696
• /
• 2010

The Proxy Mobile IPv6 (PMIPv6) is a network localized mobility management protocol that is independent of global mobility management protocols. In a single mobility domain (LMD), the mobile node (MN) is not involved in any IP mobility-related signaling and uses only its PMIPv6 home address for all its communication. Subsequently, when the MN moves into another LMD, the MN must change its PMIPv6 home address. In such a circumstance, host-based mobility signaling is activated. Thus, the nature of the network-based mobility of the PMIPv6 cannot be retained. Additionally, if the MN does not support global mobility, it cannot maintain communication with its correspondent node (CN). In this paper, we propose a solution for global mobility support in PMIPv6 networks, called Global-PMIPv6 that allows current communication sessions of a MN without mobility protocol stacks to be maintained, even when the MN moves into another LMD. Thus, Global-PMIPv6 retains the advantages of the PMIPv6 for global mobility support. We then evaluate and compare network performance between our proposed solution and PMIPv6.