• KEPCO Journal on Electric Power and Energy
• /
• v.6 no.3
• /
• pp.225-234
• /
• 2020

• KEPCO Journal on Electric Power and Energy
• /
• v.6 no.3
• /
• pp.321-322
• /
• 2020

• KEPCO Journal on Electric Power and Energy
• /
• v.6 no.3
• /
• pp.323-324
• /
• 2020

• Women's Health Nursing
• /
• v.30 no.1
• /
• pp.6-8
• /
• 2024

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.6
• /
• pp.522-531
• /
• 2003

Samples with the nominal composition, B $i_{1.84}$P $b_{0.34}$S $r_{1.91}$C $a_{2.03}$C $u_{3.06}$ $O_{10+{\delta}}$ high- $T_{c}$ superconductors containing MgO as an additive were fabricated by a solid-state reaction method. Samples with MgO of 5~30 wt% each were sintered at 820~86$0^{\circ}C$ for 24 hours. The structural characteristics, critical temperature, grain size and image of mapping with respect to MgO contents were analyzed by XRD(X-Ray Diffraction), SEM(Scanning Electron Microscope) and EDS(Energy dispersive X-ray spectrometer) respectively. As MgO contents increased, intensity of MgO Peaks and ratio of Bi-2212 phase in superconductors intensified and the proportion of the phase transition from Bi-2223 to Bi-2212 was increased.

• The Korean Journal of Food & Health Convergence
• /
• v.7 no.6
• /
• pp.1-8
• /
• 2021

Premna foetida is a woody plant with short and twisted trunk. P. foetida is a scandent, erect shrub or small tree, thorny on the trunk and large branches. Leaves are opposite or whorled and entire or serrate. Premna foetida is a wild plant locally known as "Daun Sebuas". P. foetida is used for it nutritive and as traditional treatment. The fruit and leaves of P. foetida are prepared for salad. The study aimed at the hydrodistillation and antioxidant activity of leaves, stem-bark and fruits essential oil from Premna foetida Linn, they were analysed by capillary GC and GC-MS. Ninety eight compounds representing 81.68±0.02, 37.31±0.05 and 93.45±0.03 of the isolates of leaves, stem-bark and fruits respectively were identified, the most abundant were α -Duprezianene (77.27±0.03, leaves, α-Gurjunene (36.06±0.05) fruits and Hinesol acetate (77.19±0.03) stem-bark. Components among which sesquiterpenoids dominated. The total volatiles were assayed for antioxidant potentials using 2, 2-diphenyl-1-picrylhydrazyl (DPPH). The total volatiles showed strong activity with IC₅₀ of 11.74±0.82㎍/ml, 9.63±0.34 ㎍/ml and 49.73±1.12 ㎍/ml for leaves fruits and stem-bark respectively.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.188-188
• /
• 2022

Our previous study identified a resistance locus to Phytophthora sojae (isolate 2457) in an interval of 3.8-4.7 Mbp on chromosome 3 via genetic mapping using a 'Daepung'×'Daewon' recombinant inbred population. Since differential gene expression between Daepung (susceptible) and Daewon (resistant) after inoculation of P. sojae is unknown, RNA sequencing was carried out to compare transcriptomic changes between the two genotypes following inoculation with P. sojae isolate 2457. The two varieties were inoculated using hypocotyl inoculation at the VC stage and stem tissue of 1 cm above and below of the inoculated site were sampled at 0, 6, 12 hours after inoculation (hai), respectively. Differentially expressed genes (DEGs) under same cultivar in different time point and Daepung vs. Daewon in same time point were investigated. In comparison of Daepung vs. Daewon at 12 hai, a total of 3,513 DEGs were identified, including two nucleotide-binding site-leucine rich repeat (NBS-LRR) genes (Glyma.03g034800 and Glyma.03g034900) that are located in the previously reported resistance locus on chromosome 3. In addition, 14,966 DEGs were detected between 0 vs. 6 hai, containing one of candidate genes (Glyma.03g035300). This gene was upregulated by up to 4-fold in Daewon and Daepung. Additional results will be further discussed in the presentation. This study will provide valuable information for soybean crop improvement.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.52 no.6
• /
• pp.249-256
• /
• 2003

Samples with the nominal composition, Ag-$Bi_{1.84}Pb_{0.34}Sr_{1.91}Ca_{2.03}Cu_{3.06}O_{10+{\delta}}$ high $T_{c}$ superconductors containing Ag as an additive were fabricated by a solid-state reaction method. Samples with Ag of 10 wt%, 30 wt%, and 50 wt% each were sintered at $860^{\circ}C$~$870^{\circ}C$ for 24 hours. The structural characteristics, the microstructures and the critical temperature with respect to the each samples were investigated by XRD, four-prove methode, SEM and EDS respectively. The $T_{c}\;^{zero}$ of the sample with the 50 wt% Ag additive at the surface showed 94 K.

• Nuclear Engineering and Technology
• /
• v.28 no.6
• /
• pp.542-550
• /
• 1996

Nuclear ship reactors have several features different from land-based PWR's. Especially, effects of ship motions on reactor thermal-hydraulics and good load following capability for abrupt load changes are essential characteristics of nuclear ship reactors. This study modified the RETRAN-03 to analyze the thermal-hydraulic transients under three-dimensional ship motions, named RETRAN-03/MOV in order to apply to future marine reactors. First Japanese nuclear ship MUTSU reactor have been analyzed under various ship motions to verify this code. Calculations have been peformed under rolling, heaving and stationary inclination conditions during normal operation. Also, the natural circulation has been analyzed, which can provide the decay heat removal to ensure the passive safety of marine reactors. As results, typical thermal-hydraulic characteristics of marine reactors such as flow rate oscillations and S/G water level oscillations have been successfully simulated at various conditions.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05a
• /
• pp.684-689
• /
• 1998

전기출력 150 MWe(열출력 392 MWth)의 U-Zr 이원합금핵연료 사용 소형노심인 액채금속로 KALIMER 98.03 설계 노심에 대하여 열수력 특성을 분석하고, 그 결과를 97.07 설계 노심의 열수력 설계특성과 비교.분석하였다. 분석을 위해서 냉각재 유량배분 계산에 ORFCE-F, 유량배분에 따를 온도계산에는 ORFCE-T를 사용하였는데, 이들은 현재 KALIMER 개발의 개념설계 초기 단계에서 사용하고 있는 모듈이다. 열수력 특성 분석은 먼저 각 집합체의 출력과 핵연료봉의 최고 선출력에 따라 유량그룹을 설정하고, 각 집합체의 최고온도 연료봉에 대하여 냉각재 온도, 피복관 중심온도, 핵연료 중심온도 등을 계산하는 방식으로 수행한다 열수력 특성분석 결과 98.03 설계 노심이 97.07 설계 노심에 비해 노심내 출력분포가 더욱 평탄화 되어, 노심 유량영역은 16개에서 11개로 감소되었고, 그에 따를 온도계산에서도 피복관 중심에서의 2$\sigma$ 온도가 6$65^{\circ}C$에서 628$^{\circ}C$로 낮아지는 둥 매우 향상된 설계임을 알 수 있었다.