• 한국정보전자통신기술학회논문지
• /
• 제11권6호
• /
• pp.651-657
• /
• 2018

스퍼의 크기를 줄이기 위해 델타-시그마 변조기와 스퍼감소회로가 도입된 위상고정루프(PLL)를 제안하였다. 델타-시그마 변조기는 스퍼 잡음을 높은 주파수 대역으로 이동시켜 루프필터가 잡음 제거를 쉽게 할 수 있도록 해준다. 이는 위상고정루프의 대역폭을 적절히 조절하면 스퍼 크기를 크게 감소시킬 수 있다. 스퍼감소회로는 한주기당 발생하는 루프필터 전압변화를 작게 하여 스퍼 크기가 감소되도록 한다. 제안한 스퍼감소회로는 위상고정루프의 크기에 거의 영향이 없을 정도로 간단하게 설계하였다. 이 두 가지 방법을 사용한 제안된 위상고정루프는 $0.18{\mu}m$ CMOS 공정에서 1.8V의 공급전압으로 설계되었으며, 시뮬레이션을 통해 제안된 위상고정루프의 스퍼 크기가 거의 20dB 감소된 것을 확인하였다. 스퍼의 크기가 크게 감소된 위상고정루프는 대역폭이 좁은 통신시스템에 크게 활용될 수 있다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.571-572
• /
• 2006

RTP (rapid thermal pressing), one of micro-pattern replication techniques like hot embossing, is focused on achieving shorter cycle time. DFSS(Design for Six Sigma) has been applied in order to enhance the completeness of the development process for RTP system. According to DIDOV roadmap, we derived design concepts and subsequently decided the main performances, design factors, and components for RTP system. In the design process of RTP system using finite element analysis, it was realized that its structural characteristics affect large area replicability. Optimizing structural design factors, based on CAE, it was checked out that its large area replicability could be improved in a virtual test. Finally, we have a plan to validate the large area replicability of the developed RTP system, by performing micro-pattern replication tests with polymeric sheets.

• Nuclear Engineering and Technology
• /
• 제52권6호
• /
• pp.1252-1258
• /
• 2020

This study explores the ability of non-destructive assay techniques to detect a partial material defect in which 100 g of plutonium are diverted from the center of a 1000 g can of PuO₂ powder. Four safeguards measurements techniques: neutron multiplicity counting, calorimetry, gravimetry, and gamma ray spectroscopy are used in an attempt to detect the defect. Several materials are added to the partial defect PuO₂ can to replicate signatures of the diverted material. ²⁵²Cf is used to compensate for the doubles neutron counts, ²⁴¹Am is used to compensate for the decay heat, and aluminum is used to compensate for the weight. Although, the doubles and triples difference before and after diversion are statistically indistinguishable with the AWCC in fast and thermal mode, the difference in the singles counts are statistically detectable in both modes. The relatively short half-life of ²⁵²Cf leads to a decrease (three sigma uncertainty) in the doubles neutron counts after 161 days. Combining this with the precise quantity of ²⁴¹Am needed (10.7 g) to mimic the heat signature and the extreme precision in ²⁵²Cf mass needed to defeat neutron multiplicity measurements gives reassurance in the International Atomic Energy Agency's ability to detect partial material defects.

• Journal of Acupuncture Research
• /
• 제20권1호
• /
• pp.144-158
• /
• 2003

This study was carried out to investigate what kinds of statistical techniques have been used to analyze data from oriental medicine research, For study, 551 original articles which used statistical techniques in their data analysis were selected form the articles published in The journal of Korean Acupuncture & Moxibustion Society(JKAMS) between 1984 to 2002. among them, 122 articles used descriptive statistics while 429 articles used inferential statistics for data analysis. For that 429 articles, t-test (189 articles), analysis fo variance (111 articles), chi-square test (14 articles), correlation (10 articles), regression analysis (4 articles), factor analysis(5 articles), or nonparametric test (23 articles) were chose to analyze the data. Nonparametric approach has substantial power in case data do not meet the assumption of normality. This method is not only easy to use ut also provides measures of the statistical variation of nominal and ordinal scale. This study shows that more and more recent papers use nonparametric test compared to the old articles. nine different statistical software or packages (SAS, SPSS, Statview, Minitab, Sigma plot, ISP, Graphpad prism, Excel, Access) have been used in the articles published JKMAS. High level statistical techniques such as SAS, SPSS, and Statview are user friendly and used most for acupuncture and Moxibustion research. Including tables and plots in an article facilitates understanding family process data from a descriptive standpoint, minimized erroneous statistical conclusions, and clarifies theoretically important relationships among variables. Table and plots have been used 500 and 233 articles, respectively. A computer procedure is proposed and illustrated with statistical packages using SAS, SPSS, Statview and ISP.

• 한국분말재료학회지
• /
• 제9권6호
• /
• pp.394-408
• /
• 2002

Nanostructured high strength metastable Al-, Mg- and Ti-based alloys containing different amorphous, quasicrystalline and nanocrystalline phases are synthesized by non-equilibrium processing techniques. Such alloys can be prepared by quenching from the melt or by powder metallurgy techniques. This paper focuses on one hand on mechanically alloyed and ball milled powders containing different volume fractions of amorphous or nano-(quasi)crystalline phases, consolidated bulk specimens and, on the other hand. on cast specimens containing different constituent phases with different length-scale. As one example. $Mg_{55}Y_{15}Cu_{30}$- based metallic glass matrix composites are produced by mechanical alloying of elemental powder mixtures containing up to 30 vol.% $Y_2O_3$ particles. The comparison with the particle-free metallic glass reveals that the nanosized second phase oxide particles do not significantly affect the glass-forming ability upon mechanical alloying despite some limited particle dissolution. A supercooled liquid region with an extension of about 50 K can be maintained in the presence of the oxides. The distinct viscosity decrease in the supercooled liquid regime allows to consolidate the powders into bulk samples by uniaxial hot pressing. The $Y_2O_3$ additions increase the mechanical strength of the composites compared to the $Mg_{55}Y_{15}Cu_{30}$ metallic glass. The second example deals with Al-Mn-Ce and Al-Cu-Fe composites with quasicrystalline particles as reinforcements, which are prepared by quenching from the melt and by powder metallurgy. $Al_{98-x}Mn_xCe_2$ (x =5,6,7) melt-spun ribbons containing a major quasicrystalline phase coexisting with an Al-matrix on a nanometer scale are pulverized by ball milling. The powders are consolidated by hot extrusion. Grain growth during consolidation causes the formation of a micrometer-scale microstructure. Mechanical alloying of $Al_{63}Cu_{25}Fe_{12}$ leads to single-phase quasicrystalline powders. which are blended with different volume fractions of pure Al-powder and hot extruded forming $Al_{100-x}$$(Al_{0.63}Cu_{0.25}Fe_{0.12})_x$ (x = 40,50,60,80) micrometer-scale composites. Compression test data reveal a high yield strength of ${\sigma}_y{\geq}$700 MPa and a ductility of ${\varepsilon}_{pl}{\geq}$5% for than the Al-Mn-Ce bulk samples. The strength level of the Al-Cu-Fe alloys is ${\sigma}_y{\leq}$550 MPa significantly lower. By the addition of different amounts of aluminum, the mechanical properties can be tuned to a wide range. Finally, a bulk metallic glass-forming Ti-Cu-Ni-Sn alloy with in situ formed composite microstructure prepared by both centrifugal and injection casting presents more than 6% plastic strain under compressive stress at room temperature. The in situ formed composite contains dendritic hcp Ti solid solution precipitates and a few $Ti_3Sn,\;{\beta}$-(Cu, Sn) grains dispersed in a glassy matrix. The composite micro- structure can avoid the development of the highly localized shear bands typical for the room temperature defor-mation of monolithic glasses. Instead, widely developed shear bands with evident protuberance are observed. resulting in significant yielding and homogeneous plastic deformation over the entire sample.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제5권6호
• /
• pp.283-288
• /
• 2016

최근 빅데이터 처리를 위한 연구들이 활발히 진행 중이며, 관련된 다양한 제품들이 개발되고 있다. 이에 따라, 기존 환경에서는 처리가 어려웠던 대용량 로그 데이터의 저장 및 분석이 가능해졌다. 본 논문은 다수의 서버에서 빠르게 생성되는 대량의 로그 데이터를 Apache Hive에서 분석할 수 있는 데이터 저장 구조를 제안한다. 그리고 저장된 로그 데이터로부터 특정 서버의 이상 유무를 판단하기 위해, 이동 평균 및 3-시그마 기반의 이상 탐지 기술을 설계 및 구현한다. 또한, 실험을 통해 로그 데이터의 급격한 증가폭을 나타내는 구간을 이상으로 판단하여, 제안한 이상 탐지 기술의 유효성을 보인다. 이 같은 결과를 볼 때, 본 연구는 하둡 기반으로 로그 데이터를 분석하여 이상치를 바르게 탐지할 수 있는 우수한 결과라 사료된다.

• Bulletin of the Korean Chemical Society
• /
• 제12권2호
• /
• pp.178-181
• /
• 1991

The crystal structure of dehydrated fully $Cd^{2+}$-exchanged zeolite A evacuated at $2{\times}10^{-6}$ Torr and $450^{\circ}C (a = 12.225(2){\AA})$ and of its ethylene sorption complex (a = 12.219(2) ${\AA}$) have been determined by single crystal X-ray diffraction techniques in the cubic space group Pm3m at $21(1)^{\circ}$. The structures were refined to final error indices, $R_1$ = 0.063 and $R_2$ = 0.065 with 266 reflections and $R_1$ = 0.055 and $R_2$ = 0.062 with 260 reflections, respectively, for which $I{\gg}3{\sigma}(I)$. In both structures, six $Cd^{2+}$ ions lie at two distinguished three-fold axes of unit cell. Dehydrated $Cd_6$-A sorbs 4 ethylene molecules per unit cell at $25^{\circ}C$ (vapor pressure of ethylene is ca. 100 Torr). Each $Cd^{2+}$ ion forms a lateral ${pi}$ complex with an ethylene molecule. Four $Cd^{2+}$ ions exist in a nearly tetrahedral environment, 2.210(7)${\AA}$ apart from three framework oxygen ions (considering ethylene molecule as a monodentate ligand) and $2.67(6){\AA}$ from each carbon atom of ethylene molecule.

• 대한화학회지
• /
• 제38권5호
• /
• pp.339-344
• /
• 1994

부분적으로 $Co^{2+}$이온으로 치환한 제올라이트 A를 탈수한 후 메탄올을 흡착한 결정구조 즉 $Co_4Na_4Si_{12}Al_{12}O_{48}{\cdot}$6.5CH_3OH$ (a = 12.169(1) $\AA)$를 입방공간군 Pm$\bar3$m를 사용하여 단결정 X-선 회절법으로 해석하고 정밀화하였다. $Co_4Na_4$-A 제올라이트를 $360^{\circ}C$ 에서 $2{\times}10^{-6}$ torr하에서 2일간 진공탈수한 후 $22(1)^{\circ}C$에서 약 104 torr의 메탄올 증기로 약 1시간 동안 흡착시켜 결정을 만들었다. Full matrix최소자승법 정밀화 계산에서 I > $3\sigma(I)$인 147개의 독립반사를 사용하여 최종오차인자를 $R_1$ = 0.061, $R_2$ = 0.060까지 정밀화시켰다. 단위세포당 4개의 $Co^{2+}$ 이온과 1.5개의 $Na^+$ 이온은 6-링 산소와 결합하고 있었다. 4개의 $Co^{2+}$ 이온은 O(3)의 (111)평면에서 큰 동공쪽으로 약 0.44 $\AA$ 들어가 위치하고 1.5개의 $Na^+$ 이온은 O(3)의 (111)평면에서 소다라이트 동공 깊숙히 약 0.55 $\AA$ 들어간 자리에 위치하고 있다. 2.5개의 $Na^+$ 이온은 8-링 평면상에 위치한다. 단위세포당 약 6.5개의 메탄올 분자가 흡착되었다. 이들 메탄올 분자는 큰 동공내에 위치하고 있고, 4개의 $Co^{2+}$이온과 2.5개의 $Na^+$이온과 결합하고 있다. 4개의 메탄올의 산소는 6-링에 위치한 $Co^{2+}$이온과 결합하고 나머지 2.5개의 메탄올의 산소는 8-링에 위치한 $Na^+$이온과 결합하고 있다.

• 시스템엔지니어링학술지
• /
• 제6권2호
• /
• pp.47-57
• /
• 2010

Taylor and Ford in the 1910s led to the "scientific management" for the entire industry from the manufacturing spread of TQM Total Quality Management has been structured as a management efficiency, such as 6-Sigma techniques were developed. SW development also introduces the idea, such as CMMI and SPICE-based process management, management practices have evolved. However, in recent years to increase the knowledge of workers in the manufacturing process oriented management approach is under serious challenge. Business performance or productivity will be varied depending all motivation, human relationship, job involvement rather than simply putting a lot of time. Especially in the SW industry which is depending on human resource, Creativity should be limited in traditional management methods. Recently, Google and Apple, Cisco and global advanced companies adopt a human relationship management. Their productivity and creativity in product development has been successful by giving autonomy and motivation, enthusiasm and vision to tile employees. Human relationship management since the mid-1990s, appears as a new paradigm so called Agile process in the field of SW development. Agile processes emphasis on light, flexible and responding to changes immediately in the business environment step away from traditional management approach which is the heavy and complicated process. In this paper, agile project management concepts and practices which is applied to industry will be examined.

• 천문학회지
• /
• 제38권2호
• /
• pp.315-318
• /
• 2005

We have carried out a precise Doppler survey of G-type giants aiming to unveil the properties of planetary systems in intermediate-mass stars ($1.5-5M_{\bigodot}$). G-type giants are promising targets for Doppler planet searches around massive stars, because they are slow-rotators and have many sharp absorption lines in their spectra and their surface activities are relatively low in contrast to their younger counterparts on the main-sequence (B-A stars). We are now monitoring radial velocities of about 300 late G-type (including early K-type) giants using HIgh Dispersion Echelle Spectrograph (HIDES) at Okayama Astrophysical Observatory. We have achieved a Doppler precision of about 6-7 m/s over a time span of 3 years using an iodine absorption cell. We found that most of the targets have radial velocity scatters of ${\sigma}{\~} 10-20 m\;s^{-1}$ over 1-3 years, with the most stable reaching levels of 6-8 m $s^{-1}$. Up to now, we have succeeded in discovering the first extrasolar planet around a G-type giant star HD 104985, and also found several candidates showing significant radial velocity variations, suggesting the existence of stellar and substellar companions. Observations have continued to establish their variability.