• 전기의세계
• /
• v.41 no.10
• /
• pp.3-9
• /
• 1992

동해안의 6개 예정입지 지점의 다년간 기상데이터를 분석한 결과 3개지점 정도의 유수한 후보지를 발견하였다. 특히 장기갑의 평균풍속은 제주도 월항지역 보다 더 우수한 결과를 얻었다. 이 지역에 설치할 수 있는 풍력터빈의 형식으로 수직축 Darrieus Type을 검토한 결과 무리가 없음을 알 수 있었다. 수직축 터빈은 풍속 6m/s이상이면 정격의 발전모드에 진입하니, 3개 지역의 분석결과 년4000시간 이상의 발전은 가능하리라 사료된다. 단위 풍력발전 용량은 향후 상세설계가 뒤따라야 하겠지만, 대략 150-200KW로 산정되며 년간 단위 기계에서 600-800Mwh의 전력을 얻을 수 있으리라 예상된다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.6
• /
• pp.1104-1117
• /
• 1989

본 연구는 축방향의 동압축하중(axial dynamic compression)을 받는 작은 중공원판이 고변형도율(.epsilon.＞1,000/sec), 고변형률(.epsilon.=ln(h/h$_{o}$ )＞1.0)로 변형하는 재료에 대해서 연구하고자 한다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2021.01a
• /
• pp.219-220
• /
• 2021

본 논문에서는 마이크로컨트롤러에서 6축 IMU 센서를 사용한 제스쳐를 인식하기 위한 최적화된 학습 방법을 제안한다. 6축 센서값을 119번 샘플링할 경우 특징 차원이 매우 크기 때문에 다층 신경망을 이용할 경우 학습파라미터가 마이크로컨트롤러의 메모리 허용량을 초과하게 된다. 본 논문은 성능은 유지하며 학습 파라미터 개수를 효과적으로 줄이기 위한 마이크로컨트롤러에 최적화된 1D CNN을 제안한다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.19 no.6
• /
• pp.98-104
• /
• 2015

Excessive thrust acting on the rotor of pump can cause the damage of pump or the decrease of pump lifetime. Therefore, for ensuring the safety of LOX pump of a liquid rocket engine, the thrust of pump rotor is estimated by similarity tests. Axial thrust is indirectly measured by an axial thrust measurement unit positioned outside pump. Radial thrust is calculated based on pressure distribution of volute scroll. As a result, axial and radial thrust are increased when the flowrate of pump decreases. However, both thrusts do not affect the stability of pump rotor since their values are not large.

• KAPE Magazine
• /
• s.248
• /
• pp.4-6
• /
• 2017

웰빙 중시의 소비패턴으로 변화하고 있는 이때 소비자 트렌드 변화에 부응하고 한우 산업 발전을 견인할 수 있는 소 도체 등급기준 보완이 축평원의 hot한 이슈가 되고 있다. 그래서 이번 KAPE인(人)의 주인공으로 축평원 핵심부서의 팀장인 연구개발팀 강세주 팀장을 만나 보았다. 강세주 팀장은 1993년 입사로 올해로 25년 차를 맞이하는 베테랑급 축산전문인이다 그는 '이론과 기술'을 함께 갖추어야겠다는 인생 목표하에 강하고도 듬직하며 동시에 따뜻한 포용력을 겸비한 내유외강의 리더십을 발휘하는 팀장이다. 또한, 1999년 축산기술사 자격과 2003년 8월에는 (식품)공학박사 학위를 취득한 축평원의 인재이기도 하다. 그는 연구개발팀 근무경력이 두 번에 걸쳐 6년으로 소 도체 등급기준 보완 개편 작업부터 모든 과정을 같이 하였다. 그런 그에게 소 도체 등급기준 보완(안) 마련과 검증 및 실험과정까지 상세한 설명을 들어보았다.

• Nuclear Engineering and Technology
• /
• v.27 no.6
• /
• pp.898-910
• /
• 1995

기존경수로 핵연료의 연소도를 크게 증가시키는 고연소도 핵연료 및 미래형 핵연료에서는 연료봉의 축방향 조사성장이 증가하게 되고 이와 같이 증가된 축방향 연료봉 성장을 수용하기 위해서는 상.하단 고정체 사이의 간격이 더 필요하게 된다. 이 요구되는 상.하단고정체 사이의 축방향 공간을 얻기 위하여 기존 국산핵연료 하단고정체 유로판 및 이물질여과 하단고정체에 대하여 응력강도를 기준으로 두께최적화 계산을 수행하였다. 계산은 범용 유한요소 코드인 ANSYS 코드를 이용하였다. 이 두께 최적화에 의해 기존의 국산 17$\times$17 경수로 핵연료의 하단고정체에서는 지지 Leg의 폭과 길이를 증가시킴으로써 유로판의 두께 감소를 약 5.1mm 줄일 수 있음을 알 수 있고, DRBEP용 하단고정체에서는 약 4.6mm의 두께 감소가 가능한 것으로 해석되었다.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.19 no.2
• /
• pp.151-158
• /
• 2016

Tidal farm is a multi-arrayed turbine system for utilizing tidal stream energy. For horizontal-axis turbine(HAT) system, it is recommended that each unit has to be deployed far apart in order to avoid hydrodynamic interference among turbines, as proposed by the European Marine Energy Centre(EMEC). But there is no rule for the arrangement of vertical-axis turbine(VAT) yet. Moreover it has been reported that a proper arrangement of adjacent turbines can enhance the overall efficiency even greater than an arrangement without mutual interference effect. This paper suggests the layout of VATs showing the better performances, which turned out to be quite different from HATs' arrangement. Numerical calculations were performed to investigate the performance variation in terms of the rotational direction as well as the distance between turbines. It has been shown that the best combination of rotational direction and distance between turbines can increase its performance higher about 9.2% than that of two independently operated turbines. It is likely that such improvement is due to the increased velocity between adjacent turbines. For diagonally arranged turbines, the maximum normalized mean power coefficient was obtained to be higher about 5.6% than that of two independent turbines. It is expected that the present results can be utilized for conceptual design of tidal farm to harness the tidal stream energy.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.9
• /
• pp.749-755
• /
• 2016

A new method for measuring the 3-axis cutting forces of a pick cutter by substituting costly 3-D load cells is proposed in this paper. The proposed cutting force measurement method is capable of estimating the 3-axis cutting forces through mechanical constraints using four single-axis compressive load cells and shoulder bolts. The feasibility of the proposed method was verified by finite element analysis, and the accuracy of the force measurement of the developed force measurement device was investigated by conducting linear rock cutting tests. The tests showed that the new cutting force measurement method is able to measure 3-axis cutting forces with a relative error of approximately 6%. These results imply that the new method could be a suitable alternative to conventional 3-D load cells. In addition, it will allow a significant reduction of approximately 20-30% in the costs required for measuring the cutting force when compared to conventional 3-D load cells.

• Journal of the Korean earth science society
• /
• v.42 no.2
• /
• pp.175-184
• /
• 2021

Fold axis of fold, a representative ductile deformation structure, is important for collecting information on the 3D fold structure and the orientation of maximum horizontal principal stress at the time of deformation. For this reason, several fold axis measurement methods based on the fold-related structural elements have been suggested and used even in areas where it is impossible to measure it directly. Thus, these various measurement methods are briefly introduced here, and the measured data with different methods are compared to estimate these methods' reliability. For this purpose, we acquired fold axes at six sites across the Manhang formation of the Pyeongan supergroup and limestones of the Joseon supergroup in Danyang, Chungcheongbuk-do, where fold structures are well developed. The data from the different methods are generally consistent, indicating practical applicability. Most of the fold axes from the measured sites show NNNE or NE trends indicating WNW-ESE or NW-SE trending maximum horizontal principal stress, except for the one site with a WNW trend. The WNW-ESE trending fold axis might be related to a different orogeny or secondary folding. The minor difference in the trends between N-NNE and NE was interpreted as being due to different scale; however, further research is needed to confirm this.

• Membrane Journal
• /
• v.6 no.4
• /
• pp.219-226
• /
• 1996

Rotary disc ultrafiltration module(RDM) was developed for the separation of oil emulsions. This module was devised to reduce the gel polarization phenomenon by alecoupling the operation pressure and the surface velocity of solution in ultrafiltration(UF) processes. Two-shaft engaged disc type RDM having 20 rotary disc membcanes(UOP, USA) was operated under 85kPa vacuum at $25^{\circ}$C. The pressure drop due to slip flow in the two-shaft RDM was found to be proportional to $(2.5{\omega}r)^{2}$. The pure water flux of two-shaft RDM decreased by 9.95% at the angular velocity of 41.89rad/s compared to the decrease of 3.01% for one-shaft RDM at the same velocity. When the angular velocity was changed from 31.42rad/s to 2.62rad/s, the flux decline for 1% cutting oil in two-shaft RDM was 30.16% that is similar to that of one-shaft RDM. Disc gap of 3mm and 7mm did not show any significant differences in the flux for 1% cutting oil solution. A modified model for two-shaft RDM showed good agreement with the experimental results for the cutting oil solution.