• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.12
• /
• pp.1753-1759
• /
• 2009

The present study was conducted to investigate the effects of components obtained from Zanthoxylum schinifolium and Zanthoxylum piperitum on rancidity and quality of Kwamegi (semi-dried Pacific saury, Coloabis saira). Ethanol extract (ZS) of Zanthoxylum schinifolium leaves or the essential oil (ZP) obtained from pericarp of Zanthoxylum piperitum in 1 or 20% ethanol solution was sprayed to the Pacific saury before Kwamegi preparation at its final concentrations of 0.125~2 ppm in the Kwamegi. The prepared Kwamegi was vacuum packed with multi-layered film (polyethylene/polyamide/EVOH/polyethylene, thickness 80 μm) and kept at -20${^{\circ}C}$ until use. After opening the package Kwamegi was stored at 4${^{\circ}C}$ for 1, 3 and 7 days during which rancidity tests and sensory evaluation were carried out. Acid, peroxide, and thiobarbituric acid (TBA) values increased with storage time but reduced significantly by the addition of ZS at the concentrations of ≥G0.125 ppm and ZP≥F0.25 ppm. The effects of ZS and ZP were dose-dependent and more pronounced as storage time prolonged. The ZS and ZP also reduced dimethyamine and trimethyamine (TMA) contents which were increased with time, while they prevented the decrease of trimethyamine oxide. The ZS at the concentration of ≥G0.25 ppm and the ZP at >0.5 ppm were needed to maintain TMA less than 4.5 mg/100 g for 3 day storage at 4${^{\circ}C}$. Sensory evaluation of the Kwamegi exhibited a slightly higher preference with the ZS and ZP treated ones at the level of 0.25~0.5 ppm. It is concluded that very low amounts of ZS and ZP are effective in suppression of rancidity of Kwamegi and could be utilized for its quality management.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.29 no.2
• /
• pp.180-188
• /
• 2002

Newly developed curing units(plasma arc curing units) operate at relatively high intensity and are claimed to result in optimum properties of composite resin in a short curing time. The purpose of this study was to evaluate the microhardness and microleakage at the resin-tooth interface of two types of composite resins polymerized with visible light and plasma arc curing units. The results from the present study can be summarized as follows 1. Microhardness in each depth was shown to be higher in group AHL than AP3 & AP6. Group ZHL was lower than AP6 at surface(p<0.05) and had no statistically significant difference at 1mm and 2mm(p>0.05). In other depths, group ZHL was higher than ZP3 and ZP6(p<0.05). 2. The incremental reduction in microhardness with depth was shown to be in all group except in surface-1mm of group AHL and $1{\sim}2mm$ of group ZHL(p<0.05). 3. Degree of microleakage in all oops were shown to be higher in gingival margin than occlusal margin but no statistically significant difference(p>0.05). 4. Differences between curing methods in microleakage were shown to be no statistically significant difference(p>0.05). 5. Differences between composite resins in microleakage were shown to be no statistically significant differ once(p>0.05).

• Journal of Periodontal and Implant Science
• /
• v.50 no.2
• /
• pp.121-131
• /
• 2020

Purpose: Dental implant-associated medication-related osteonecrosis of the jaw has been frequently reported in patients administered bisphosphonates (BPs) to prevent osteoporosis. The aim of this study was to investigate the effect of intermittent administration of parathyroid hormone (PTH) on peri-implant bone in the maxillae of ovariectomized rats systemically administered BPs. Methods: Thirty 8-week-old female Sprague-Dawley rats were randomly divided into 3 groups. The OVX-ZP group included ovariectomized rats administered 60 ㎍/kg of zoledronate once a week for 6 weeks and 30 ㎍/kg PTH after implant installation. The OVX-Z group included ovariectomized rats administered 60 ㎍/kg of zoledronate once a week for 6 weeks and saline after implant installation, and the control group included rats that underwent a sham operation and were then administered saline. Rats were sacrificed 4 weeks after implant placement for histomorphometric and micro-computed tomography (CT) analyses. Results: The average bone area percentage was greater in the OVX-ZP group than in the OVX-Z group (53.4%±4.0% vs. 28.9%±9.5%, P=0.01). The bone-to-implant contact ratio was 50.8%±1.4% in the OVX-ZP group and 16.9%±2.4% in the OVX-Z group (P=0.012). The average bone volume ratio as shown on micro-CT was 31.3%±19.8% in the OVX-ZP group and 19.4%±9.3% in the OVX-Z group (P=0.045). The OVX-ZP and OVX-Z groups displayed similar trabecular thickness (0.06±0.004 mm vs. 0.06±0.002 mm) (P>0.05) and trabecular separation (0.21±0.02 mm vs. 0.29±0.13 mm) (P>0.05). However, the number of trabeculae in the OVX-ZP group was significantly higher than that in the OVX-Z group (4.3±1.33/㎣ vs. 2.2±0.19/㎣) (P=0.024). Conclusions: The present findings indicate that intermittently-administered PTH can promote peri-implant bone formation and suggest that PTH administration may aid in effective treatment for medication-related osteonecrosis of the jaw after dental implantation.

• Journal of Embryo Transfer
• /
• v.23 no.1
• /
• pp.1-4
• /
• 2008

This study was performed to investigate the effect of laser-assisted hole in the zona pellucida (ZP) of frozen-thawed ICR mouse embryos on the process of hatching that is critical for expanded blastocysts to implant into endometrium, Vitrification medium, composed of ethylene glycol and sucrose supplemented with 7.5% (w/v) PVP, was used to freeze $2{\sim}4$ cell stage embryos recovered from oviducts of superovulated and mated female mice before storing them in $LN_2$. Right after thawing them, a laser beam was shot to make a hole in ZP followed by culturing in KSOM for $96{\sim}120\;hr$ and examining development to blastocyst and hatching every 12 hr. Laser-treated embryos showed significantly higher hatching rate compared to control (92.9% vs. 22.1%, p<0.05). From around Day 4, blastocysts developed from laser-treated embryos started hatching while the blastocysts of control group failed to hatch showing a lot of shrinkage. This study shows that a laser-assisted hole in ZP improves the hatching rate of blastocysts developed from frozen-thawed, in vitro cultured ICR mouse embryos.

• Restorative Dentistry and Endodontics
• /
• v.43 no.1
• /
• pp.7.1-7.7
• /
• 2018

Objectives: The aim of this study is to compare the shear bond strengths of ceramic brackets bonded to zirconia surfaces using different zirconia primers and universal adhesive. Materials and Methods: Fifty zirconia blocks ($15{\times}15{\times}10mm$, Zpex, Tosoh Corporation) were polished with 1,000 grit sand paper and air-abraded with $50{\mu}m$ $Al_2O_3$ for 10 seconds (40 psi). They were divided into 5 groups: control (CO), Metal/Zirconia primer (MZ, Ivoclar Vivadent), Z-PRIME Plus (ZP, Bisco), Zirconia Liner (ZL, Sun Medical), and Scotchbond Universal adhesive (SU, 3M ESPE). Transbond XT Primer (used for CO, MZ, ZP, and ZL) and Transbond XT Paste was used for bracket bonding (Gemini clear ceramic brackets, 3M Unitek). After 24 hours at $37^{\circ}C$ storage, specimens underwent 2,000 thermocycles, and then, shear bond strengths were measured (1 mm/min). An adhesive remnant index (ARI) score was calculated. The data were analyzed using one-way analysis of variance and the Bonferroni test (p = 0.05). Results: Surface treatment with primers resulted in increased shear bond strength. The SU group showed the highest shear bond strength followed by the ZP, ZL, MZ, and CO groups, in that order. The median ARI scores were as follows: CO = 0, MZ = 0, ZP = 0, ZL = 0, and SU = 3 (p < 0.05). Conclusions: Within this experiment, zirconia primer can increase the shear bond strength of bracket bonding. The highest shear bond strength is observed in SU group, even when no primer is used.

• Restorative Dentistry and Endodontics
• /
• v.16 no.1
• /
• pp.87-105
• /
• 1991

The purpose of this experiment was to measure the leaking and solubility of commonly used dental restorative materials - Silux plus (CS), Hi-pol (CH), Clearfil F-II, Fissureseal (FS), Glass-Ionomer cement Fuji Type II (GI), Amalgam Cavex 68 (AM), Zinc Phosphate Cement (ZP) and gutta-percha (GP) and investigate the relation between the solubility and marginal leakage. Disc-shape specimens were fabricated with each material and dipped into deionized water, 0.01M lactic acid and 0.005M KOH solution, thus the total ionic concentrations in each solution was measured with ion chromatograph after 1, 3, and 7 days, respectively. For the solubility test, each specimen was immersed in 0.001M and 0.01M lactic acid for 24 hours, respectively and total weight loss was calculated. Also, Zn leaking through the margin of restorations was measured. The obtained results were as follows: 1. The amounts of eluted ion from the eight materials were most in 0.01M lactic acid and least in deionized water. 2. Of the eight materials, the fluoride release was greatest for glass ionomer cement (GI) in 0.01 M lactic acid after 7 days. 3. In analysis of the divalent cation, Mg was eluted most for zinc phosphate cement (ZP) and Ca for Clearfil F-II (CF) in 0.01M lactic acid after 7 days. 4. In analysis of transition metals, Cu and Zn were detected only. 5. The solubility rate of eight materials was greater in 0.01M lactic acid than in 0.001M for 24 hours, for zinc phosphate cement (ZP) the rate was greatest (5.4%) in 0.001M lactic acid, and amalgam least (0.01%). 6. The Zn concentration of restorative material with Z.P.C base was greater in 0.01M lactic acid than in 0.001M lactic acid.

• Korean Journal of Animal Reproduction
• /
• v.16 no.1
• /
• pp.47-53
• /
• 1992

This study was carried out to investage the effect of cryoprotectant concentration and equilibration time on volume change and in vitro development of intact and bisected mouse embryos by rapid freezing. When compacted morulae were rapidly frozen in 3.0 to 4.0 glycerol or DMSO with 0.25M sucrose solution, the superior(P<0.05) post-thaw survival rate was obtained at the glycerol concentration of 4.0M(89.4%) than 3.0M(71.4%) or 5.0M(42.4%), but at the DMSO concentration of 3.0M(84.5%) than 4.0M(51.1%) or 5.0M(0.0%). The optimal equilibraton time for rapid freezing of ZP-free or bisected morulae in 4.0M glycerol with 0.25M sucrose was found tobe 3 minutes. The minimal volume of compacted morulaewhich corresponded with 61 to 62% of pre-equilibrated embryo volume was obtained from equilibration for 3 minutes in both 3.0 and 4.0M glycerol solutions with 0.25M sucrose.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.3
• /
• pp.312-319
• /
• 2009

Statement of problem: Delamination of veneering porcelain from underlying ceramic substructures has been reported for zirconia-ceramic restorations. Colored zirconia cores for esthetics have been reported that their bond strength with veneered porcelain is weaker compared to white zirconia cores. Purpose: This study aimed to investigate the shear bond strength by manufacturing the veneering porcelain on the colored zirconia core, using the layering technique and heat-pressing technique, and to evaluate the clinical stability by comparing the result of this with that of conventional metal ceramic system. Material and methods: A Metal ceramic (MC) system was tested as a control group. The tested systems were Katana zirconia with CZR (ZB) and Katana Zirconia with NobelRondo Press (ZP). Thirty specimens, 10 for each system and control, were fabricated. Specimen disks, 3 mm high and 12 mm diameter, were fabricated with the lost-wax technique (MC) and the CAD-CAM (ZB and ZP). MC and ZB specimens were prepared using opaque and dentin veneering ceramics, veneered, 3 mm high and 2.8 mm in diameter, over the cores. ZP specimens were prepared using heat pressing ingots, 3 mm high and 2.8mm in diameter. The shear bond strength test was performed in a Shear bond test machine. Load was applied at a cross-head speed of 0.50 mm/min until failure. Mean shear bond strengths (MPa) were analyzed with the One-way ANOVA. After the shear bond test, fracture surfaces were examined by SEM. Results: The mean shear bond strengths (SD) in MPa were MC control 29.14 (2.26); ZB 29.48 (2.30); and ZP 29.51 (2.32). The shear bond strengths of the tested systems were not significantly different (P > .05). All groups presented cohesive and adhesive failures, and showed predominance of cohesive failures in ceramic veneers. Conclusion: 1. The shear bond strengths of the tested groups were not significantly different from the control group (P >.05). 2. There was no significant different between the layering technique and the heat pressing technique in the veneering methods on the colored zirconia core. 3. All groups presented cohesive and adhesive failures, and showed predominance of cohesive failures in ceramic veneers.

• Journal of Embryo Transfer
• /
• v.19 no.2
• /
• pp.185-189
• /
• 2004

The purpose of this study was to determine the possibility of in vitro maturation of tiger oocytes. Immature oocytes were recovered from a pair of ovaries. A total of 78 oocytes was collected, of which forty three were classified as good oocytes with compact cumulus cells and uniform cytoplasm. Forty three COCs were in vitro matured at $39^{\circ}C$, 5% CO2 in air atmosphere for 48 h in a IVM medium (TCM-199 supplement with 10% FBS, 0.6 mM cysteine, 0.2 mM pyruvic acid and 10 IU/mL HMG). Experiment I: the morphologic evaluation was conducted by measuring the diameter of oocytes with or without ZP, the thickness of ZP and the diameter of cytoplasm by microeyepiece at the same magnification (${\times}$100). Experiment II: the evaluation of meiotic development was conducted of the nuclear development stage of tiger oocytes. The results were summarized as follows: 1. The diameter of tiger oocytes $(176.5\pm6.1{\mu}m)$ with ZP was significantly (p<0.05) bigger than that of bovine oocytes $(150.7\pm4.9{\mu}m).$ The ZP thickness of tiger oocytes $(20.4\pm2.9{\mu}m)$ was significantly (p<0.05) bigger than that of bovine oocytes $(12.0\pm2.6{\mu}m;$ p<0.05). However, there was no significant difference in the diameter of cytoplasm (without ZP) between tiger $(122.1\pm9.7{\mu}m)$ and bovine oocytes $(118.7\pm7.5{\mu}m).$ 2. The rates of meiotic development of tiger oocytes were achieved GV (12.5 %) and MII (50.0%), respectively. These results indicated that tiger oocytes could be developed to MII in in vitro culture system.

• Environmental Engineering Research
• /
• v.25 no.4
• /
• pp.605-613
• /
• 2020

This study is to investigate the possibility of using activated carbon prepared from Iraqi date-pits (ADP) which are produced from palm trees (Phoenix dactylifera L.) as low-cost reactive material in the permeable reactive barrier (PRB) for treating lead (Pb⁺²) from the contaminated groundwater, and then compare the results experimentally with other common reactive materials such as commercial activated carbon (CAC), zeolite pellets (ZP). Factors influencing sorption such as contact time, initial pH of the solution, sorbent dosage, agitation speed, and initial lead concentration has been studied. Two isotherm models were used for the description of sorption data (Langmuir and Freundlich). The maximum lead sorption capacities were measured for ADP, CAC, and ZP and were found to be 24.5, 12.125, and 4.45 mg/g, respectively. The kinetic data were analyzed using various kinetic models particularly pseudo-first-order, pseudo-second-order, and intraparticle diffusion. COMSOL Multiphysics 3.5a depend on finite element procedure was applied to formulate transmit of lead (Pb⁺²) in the two-dimensional numerical (2D) model under an equilibrium condition. The numerical solution shows that the contaminant plume is hindered by PRB.