• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2000.04a
• /
• pp.9-10
• /
• 2000

An important business-field of world-wide steel-industry is the coating of thin metal-sheets with zinc, zinc-aluminum and aluminum based materials. These products mostly go into automotive industry. in particular for the car-body. into building and construction industry as well as household appliances. Due to mass-production, the processing is done in large continuously operating plants where the mostly cold-rolled metal-strip as the substrate is handled in coils up to 40 tons unwind before and rolled up again after passing the processing plant which includes cleaning, annealing, hot-dip galvanizing / aluminizing and chemical treatment. In the liquid Zn, Zn-AI, AI-Zn and AI-Si bathes a combined action of corrosion and wear under high temperature and high stress onto the transfer components (rolls) accounts for major economic losses. Most critical here are the bearing systems of these rolls operating in the liquid system. Rolls in liquid system can not be avoided as they are needed to transfer the steel-strip into and out of the crucible. Since several years, ceramic roller bearings are tested here [1.2], however, in particular due to uncontrollable Slag-impurities within the hot bath [3], slide bearings are still expected to be of a higher potential [4]. The today's state of the art is the application of slide bearings based on Stellite\ulcorneragainst Stellite which is in general a 50-60 wt% Co-matrix with incorporated Cr- and W-carbides and other composites. Indeed Stellite is used as the bearing-material as of it's chemical properties (does not go into solution), the physical properties in particular with poor lubricating properties are not satisfying at all. To increase the Sliding behavior in the bearing system, about 0.15-0.2 wt% of lead has been added into the hot-bath in the past. Due to environmental regulations. this had to be reduced dramatically_ This together with the heavily increasing production rates expressed by increased velocity of the substrate-steel-band up to 200 m/min and increased tractate power up to 10 tons in modern plants. leads to life times of the bearings of a few up to several days only. To improve this situation. the Mechanical Alloying (MA) TeChnique [5.6.7.8] is used to prOduce advanced Stellite-based bearing materials. A lubricating phase is introduced into Stellite-powder-material by MA, the composite-powder-particles are coated by High Energy Milling (HEM) in order to produce bearing-bushes of approximately 12 kg by Sintering, Liquid Phase Sintering (LPS) and Hot Isostatic Pressing (HIP). The chemical and physical behavior of samples as well as the bearing systems in the hot galvanizing / aluminizing plant are discussed. DependenCies like lubricant material and composite, LPS-binder and composite, particle shape and PM-route with respect to achievable density. (temperature--) shock-reSistibility and corrosive-wear behavior will be described. The materials are characterized by particle size analysis (laser diffraction), scanning electron microscopy and X-ray diffraction. corrosive-wear behavior is determined using a special cylinder-in-bush apparatus (CIBA) as well as field-test in real production condition. Part I of this work describes the initial testing phase where different sample materials are produced, characterized, consolidated and tested in the CIBA under a common AI-Zn-system. The results are discussed and the material-system for the large components to be produced for the field test in real production condition is decided. Outlook: Part II of this work will describe the field test in a hot-dip-galvanizing/aluminizing plant of the mechanically alloyed bearing bushes under aluminum-rich liquid metal. Alter testing, the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed. Part III of this project will describe a second initial testing phase where the won results of part 1+11 will be transferred to the AI-Si system. Part IV of this project will describe the field test in a hot-dip-aluminizing plant of the mechanically alloyed bearing bushes under aluminum liquid metal. After testing. the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed.

• Journal of Distribution Science
• /
• v.14 no.3
• /
• pp.55-62
• /
• 2016

Purpose - Average using time of smart-phone for Korean people is 3 hours 39 minutes and most people who are using a computer at home and their workplace can be affected over force to neck and shoulder due to unstable body posture. musculoskeletal disorders which caused by unstable body posture can affect strongly to decrease work efficiency. So this research is designed to measure the effect of using computer & smart-phone on decreased work efficiency due to musculoskeletal disorders and mediating effect between decreased work efficiency and musculoskeletal disorders. Research Design, Data, and Methodology - The author has developed a questionnaire with 6 hypothesis on the basis of previous research result with 5 constructs. The questionnaires were also made by interview and E-mail. 300 copies of questionnaires were distributed and 282 questionnaire were used for the analysis as valid data responses. SPSS ver.21.0 were used and made Cronbach's α and reliability test, correlation, Baron & Kenny 3 step mediated regression analysis. Result - Cronbach's α shows 0.770~0.954 and C.R. is 0.963~0.997 which is higher than 0.7. and AVE was 0.867~0.933. So the data are all acceptable condition. Using for a long time of a computer & smart-phone has a positive effect on musculoskeletal disorders. This means, it can cause musculoskeletal disorders if people use a computer & smart-phone for a long time due to unstable body posture. And musculoskeletal disorders can effect strongly decrease work efficiency. This study also found out that a long time of using computer can cause musculoskeletal disorders rather than using smart-phone a long time. To check mediate effect of musculoskeletal disorders between using a computer & smart-phone and Decreased Work Efficiency, author used 3-step mediated regression analysis of Baron & Kenny (1986). Using a computer for a long time mediate partially and using a smart-phone for a long time mediate completely. This means that using a smart-phone a long time is not the actual reason to decrease work efficiency. But using level of smart-phone is increasing rapidly day by day. So we need to make additional research about this matter seriously. Conclusion - Nowadays, people can not live on without a computer & smart-phone even a moment. But, using a computer for a long time will affect to cause musculoskeletal disorders and it will effect strongly to decrease work efficiency. Before, we thought over that musculoskeletal disorders were diseases of elder people. But, we found out from this study that musculoskeletal disorders can be happen to any people, even children, or workers in heavy industry or engaged in brain work. So we need to be careful when we use a computer for a long time. People also need to be careful to keep correct body posture when using both a computer and smart-phone since a smart-phone became more popular and using time level became longer. Due to increased income and living standard of people, physical growth of young people is so rapid. But the physical environment of society is not suitable for them since it can not follow up the speed of growth. Suitable work table is very important to prevent musculoskeletal disorder which can affect decrease work efficiency. For a person, a society or country, increased productivity is very important since it can directly connected to the job satisfaction. Education and reeducation for the people is also important, but to teach them how to keep good condition of health will be more important since it can increase the quality of work efficiency and quality of life. Computer and Smart-phone is one the best invention of modern society, but it can cause mental and physical disease which can affect decrease work efficiency and productivity. So it is necessary to observe attentively for the situation continually.

• Research in Plant Disease
• /
• v.24 no.2
• /
• pp.153-161
• /
• 2018

We selected eight resistant cultivars including 'Heukryongsamcheok', 'Heukgeumsolsamcheok' and 'Gangryeoksamcheok' showing high suppressive effect against cucumber downy mildew (CDM) through plastic film house and field trials in spring and autumn season in 2015. Of them, these three varieties, 'Heukryongsamcheok', 'Heukgeumsolsamcheok' and 'Gangryeoksamcheok' were used to evaluated suppressive effect against CDM by comparing disease severity (area under disease development progress curve, AUDPC) with those of three susceptible varieties under plastic film house condition. AUDPC of three resistant cultivars was in the range of 10.9 to 23.6, meanwhile those of three susceptible cultivars was in the range of 286.7 to 290.3. Consequently, we confirmed that cultivation of the selected resistant cultivars can reduce CDM in vivo. When disease severity (diseased leaf area) was investigated on a resistant cultivar ('Heukryongsamcheok') sprayed without any organic materials and susceptible cultivars sprayed single-, two times- and three times with Bordeaux mixture, sulfur-loess mixture and $Kocide^R$ (copper hydroxide), respectively, it was the lowest in the resistant cultivar plot compared to susceptible cultivar plots sprayed with any organic materials. In addition, we evaluated control effect of the selected resistant cultivar by comparing that of organic materials including lime sulfur mixture, Bordeaux mixture and garlic extract. As a result, Bordeaux mixture showed the highest control effect against CDM. AUDPC of Bordeaux mixture, resistant cultivar, lime sulfur, garlic extract and untreated control was 3.9, 10.6, 95.6, 24.9, and 258.7, respectively. Based on the above-mentioned results, we think that the resistant cultivars and Bordeaux mixture can be effectively used to control CDM as one of control measures under the farmhouse condition.

• Korean Journal of Weed Science
• /
• v.1 no.1
• /
• pp.44-51
• /
• 1981

An experiment was conducted to obtain the basic information about competitive ability of rice against weeds as affected by culm length at the Yeongnam Crop Experiment Station, Office of Rural Development in 1980. More weeds were harvested from the plot of short statured cultivar, Manseogbyeo compared to the plot of Cheongcheongbyeo that was approximately 10cm taller than Manseogbyeo regardless of planting density variables. Weeds also decreased as rice population increased from $30{\times}15cm$, $40{\times}(10{\times}10cm)$ and to $10{\times}10cm$, in order. The degree of weed suppression and floristic composition was varied depending upon plant spacing and weeding regime subjected at the previous year. The degree of weed suppression became increased with increasing rice population. The degree of weed suppression at the $10{\times}10cm$ plant spacing showed as high as hand weeding subjected in the previous year. However, in terms of floristic composition, Scirpus hotarui Roxb. became dominant when rice had cultivated at $10{\times}10cm$ plant spacing in the previous year while S. hotarui and Sagittaria pygmaea Miq. were both important in the hand weeding plot. The highest grain yield of rice showed at the $10{\times}10cm$ plant spacing while no significant difference was observed between $40{\times}(10{\times}10cm)$ and $30{\times}15cm$ plant spacings for both weeding regimes and both cultivars. However, response of grain yield to weeding regime was differed in two cultivars. For Manseobgyeo, significant grain yield decreased in no weeding plot regardless of plant spacing variables. But in case of Cheongcheongbyeo, grain yield reduction was only recognized at the $30{\times}15cm$ plant spacing. Based on these result it could be concluded that Cheongcheongbyeo (10cm taller in height) seemed to be more competitive against weeds than Manseogbyeo.

• Korean Journal of Weed Science
• /
• v.9 no.3
• /
• pp.183-200
• /
• 1989

An experiment was conducted at the greenhouse of the International Rice Research Institute in 1987 to find out the character of dry matter production, the potential seed production ability and the ecological and physiological strategies to adaptation. For these, two rice cultivars, IR64(lowland rice) and UPLRi-5(upland rice), and seven weed species were used ; Echinochloa glabrescens Munro ex Hook. f., E. cress-galls ssp. hispidula (Retz.) Honda, E. colons (L.) Link, Monochoria vaginalis (Burin. f.), Ludwigia octovalvis Jacq.) Raven, Fimbristylis miliacea Vahl and Cyperus difformis L. Adaptation strategies of weed species varied by species. However, they had efficient seed production strategy through different ways. In general, sedge weed species (F. miliacea and C. difformis) produced great amount of seeds at the expense of seed size through greater ratooning ability and low relative dry weight for flowering. For broadleaved weed species, greater number of descendants were obtained through high plasticity and low relative dry weight for flowering (M. vaginalis) or greater growth ability through effective photosynthetic efficiency (L. octovalvis). Grass weed species, on the other hand, produced their seeds through effective growth (net assimilation rate and relative growth rate), high ratooning ability (except E. crus-galls ssp. hispidula) or low relative dry weight to maximum dry weight for flowering (E. glabrescens). The harvest indices of the weed species were considerably lower than those of rice. Fimbristylis miliacea had the greatest ratooning ability followed by C. difformis, E. colons and E. glabrescens. The greatest seed productivity was recorded by C. difformis (279, 000) and L. octovalvis (268,000) while rice produced the least number of seeds (1300-6100). Log seed weight had a negative linear relationship with log seed number (y=6.30-1.48X, $R=-0.965^{**}$). For all species plant plasticity response was not directly correlated with mortality response.

• The Korean Journal of Nuclear Medicine
• /
• v.23 no.2
• /
• pp.175-181
• /
• 1989

Visual assessment of regional wall motion abnormality (RWMA) by gated blood pol scan (GBPS) serves as an useful parameter in the diagnosis, functional evaluation, and follow up in various clinical settings, but are still subject to some inherent limitations. On important problem may be the interobserver as well as intraobsever variation that may well be present due to the subjective nature of the interpretations. This study was carried out to determine the reliability and reproducibility of visual assessments made in GBPSs, and to observe the degree to which the results would be influenced by observer variation. Fifty two patients with coronary heart disease had resting GBPS and contrast ventriculography within 4 days appall. Contrast ventriculography-showed normal wall motion in 6 patients and the remaining 46 had RWMA in one or more segments. The anterior and left anterolateral views of all 52 GBPSs were analyzed by three independent observers, who selected from 5 scales, their level of confidence that there was RWMA in that segment. Reciever operating characteristic (ROC) curves for each analysis was plotted and the area under the curve $(\theta)$ was used as a parameter representing each observer's performance in his interpretations. The findings of contrast ventriculographies were used as the standard for RWMA. The apical and inferoapical segments showed the best correlation with contrast ventriculography ($\theta=0.90-0.94$, 0.81-0.94, respectively), and the inferior wall showed the poorest correlation $(\theta=0.70-0.74)$. The interpretations of the inferior, septal, apical, and posteroinferior, segments showed no difference between the observers, but there was significantly better performance in assessment by observer A compared to that by B or C for the anterolateral segments ($\theta=0.87$, 0.78, 0.76, respectively. p<0.01 for A vs B, p<0.05 for A vs C), as well as when all segments were considered altogether ($\theta=0.88$, 0.83, 0.82, respectively. both p<0.05). This was also true for the infero-apical segment between A and C ($\theta=0.09$, 0.81, p<0.05). The intraobserver variation, however, did not appear significant, with only the inferior segment for observer B showing any significant difference when observer A and B repeated the analysis 10 days latter. There was no difference in assessing dyskinesia, with all observers showing a high performance ($\theta=0.98$, 0.87, 0.97, respectively). The visual assessment of left ventricular ejection fraction by all three observers correlated well with the calculated value from a semiautomated method (Spearman's r = 0.91, 0.83, 0.83. p<0.01, p<0.05, p < 0.05). The assessment of LV and RV size also correlated well between the three observers (Kendall's w = 0.80, 0.51, p<0.01 for both left and right ventricles). The above findings suggest that RWMA visually assessed by GBPS correlates well with that done by contrast ventriculography. And although the observer's experience or skill may influence the results in certain segments, visual analysis of GBPS may serve as a reliable and reproducible means for evaluating ventricular function.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.15 no.1
• /
• pp.34-38
• /
• 2011

Purpose: The SUV is a widely used semi-quantitative index in PET for the estimation of radio-tracer accumulation in VOI. In this study, SUVs from three different PET/CT scanners were assessed, and differences between SUVs were evaluated. Materials and Methods: The PET/CT scanners which were assessed in this study were GEMINI, GEMINI TF 64 (Philips) and Biograph True Point True V 40 (Siemens). The NEMA PET phantom (Data Spectrum Corp., USA) was used to evaluate SUVs. The NEMA PET phantom has6.8 kg weight and three hot inserts. Two different activity distributions for the background and inserts were tested. The activity ratio were 3.7:3.7:7.4:11.1 MBq (1:1:2:3) and 1.85:7.4:9.25:11.1MBq (1:4:5:6) for each of background, insert 1, insert 2 and insert 3. Acquisition time was 2 minutes per bed position and NEMA PET phantom could be covered by two bed positions for all PET/CT scanners. The SUVs from each PET/CT scanner were compared with calculated true value. Results: For both activity ratios, all scanners showed similar results. The differences between each scanner were insignificant. Each scanner showed 91.2%, 85.9% and 87.2% of true SUV for GEMINI, GEMINI TF 64, Biograph True Point TrueV, respectively. Conclusion: For all scanners, SUVs were slightly lower than true value. However, the difference between scanners was insignificant. The SUVs from these scanners would be clinically meaningful if their consistent underestimation is kept in mind.

• Journal of Hospice and Palliative Care
• /
• v.9 no.1
• /
• pp.1-10
• /
• 2006

Purpose: Terminal cancer influences on patients as well as their family members. This research was performed to evaluate the quality of lift of primary family caregivers and to investigate the influencing factors. Methods: The results of survey were collected from 81 family caregivers who were taking care of hospitalized terminal cancer patients at an oncology department of university hospital in Daejeon from March 2005 to January 2006 with questionnaires. The questionnaires were consisted of the general characteristics of the subjects, and 36-items short-form Health Survey (SE-36) Korean version to evaluate the quality of life of family caregivers, the characteristics of patients and family caregivers' caring trait. Results: Family caregivers' mean (${\pm}SD$) SF-36 score was 47.9 (${\pm}20.7$). Influential factors on family caregivers' life quality were daily raring hours, economic burden, type of treatment; only supportive care, caring duration, sex, the numbers of ADLs (activity of daily livings) items that patients needed help in order by stepwised multiple logistic regression analysis (overall $R^2=0.639$, P=0.044). Conclusion: Daily raring hours and economic burden were two influential modifiable factors on family caregivers' quality of life. Therefore, social supportive systems are required to reduce family caregivers' daily caring hour and economic burden.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.35 no.2
• /
• pp.102-117
• /
• 1999

Vertical distribution of squids in relation to oceanographic structure was analyzed on the basis of experimental squid hand jigging fishing by R/V Pusan 851 in the area of 34°∼47° N, 150° E∼170°W in the North Pacific in summer from 1987 through 1993 with exception of 1991. The 6 species of squids showed different patterns of vertical and horizontal distribution as following; Boreopacific gonate squid (Gonatopsis borealis) were mainly caught in the layer of 71-80m fishing depth of the Subarctic Domain with water temperature of 6∼11℃ and salinity of 32.2∼33.6‰ and distributed in the latitudes of 41°∼43° N. Boreal clubhook squid (Onychoteuthis borealijaponica) were mainly caught in the layer of 11∼20m fishing depth of the Subarctic Domain with water temperature of 10∼12℃ and salinity of 32.9∼33.6‰ and distributed in the latitudes of 41°∼42N°. Tapanese flying squid (Todarodes pacificus) were mainly caught in the layer of 11∼20m fishing depth of the Transition Zone and the Subtropical Domain with water temperature of 15∼18℃ and salinity of 33.6∼34.0‰ and distributed in the latitudes of 40°∼42°N. Neon flying squid (Ommastrephes bartrami) were mainly caught in the layer of surface∼10m fishing depth of the Subarctic Convergence Zone and the Transition Zone with water temperature of 16∼17℃ and salinity of 33.7∼34.4‰ and distributed in the latitudes of 39 °∼41°N. Luminous flying squid (Symplectoteuthis luminosa) were mainly caught in the layer of 11 20m fishing depth of the Transition Zone and the Subtropical Domain with water temperature of 18∼20℃ and salinity of 33.8∼34.6‰ and distributed in the latitudes of 37°∼39°N. Purpleback flying squid (Symplectoteuthis oualaniensis) were mainly caught in the layer of surface∼10m fishing depth of the Subtropical Domain with water temperature of 24∼25℃ and salinity of 34.2∼34.4‰ and distributed in the latitude of 36°∼37°N.

• Pediatric Infection and Vaccine
• /
• v.9 no.2
• /
• pp.175-181
• /
• 2002

Purpose : Scrub typhus(tsutsugamushi disease) is a febrile disease characterized by fever, rash, eschar, lymphadenopathy. Therapy with tetracycline(doxycycline) or chloramphenicol is currently recommended for the treatment for scrub typhus. But there are limitations in usage a tetracycline(doxycycline) for scrub typhus in the children. Recently, there was a report that azithromycin, a macrolide antibiotic was used for scrub typhus in pregnant woman successfully. So we evaluated the effectiveness of the Clarithromycin, other a macrolide antibiotic, for scrub typhus. Methods : Seven patients with scrub typhus at department of internal medicine and three patients with scrub typhus at department of pediatrics Masan Fatima Hospital were involved for this study. A serologic diagnosis for scrub typhus were performed by use of passive hemagglutination test. Clarithromycin(Abbott Laboratories, North Chicago, IL, USA) was administrated orally in a daily dose of 500 mg for adult patients and 15 mg/kg/bid/day for pediatric patients. Results : There were 7 cases of adult patients, varying from 28 to 76 years of age and 3 cases of pediatirc patients, varying from 4 to 7 years of age with scrub typhus. All of cases had fever, myalgia, headache, rash, eschar. Seven cases had positive passive hemagglutination test and eight cases had abnormal liver function. Mean duration for the removal of fever after medication was 1.3 day(1~2 days) and all cases were recovered without complications. Conclusion : Our results suggest that Clarithromycin therapy may be effective for scrub typhus.