• Title/Summary/Keyword: 5G 주파수 공급

Search Result 13, Processing Time 0.024 seconds

Strategic Reviews on Promoting the Fourth Industrial Revolution by Supplying 5G Additional Frequency (제4차 산업혁명 활성화를 위한 5G 추가 주파수 공급의 전략적인 의견)

  • Park, S.
    • Electronics and Telecommunications Trends
    • /
    • v.34 no.6
    • /
    • pp.1-16
    • /
    • 2019
  • The paper presents five strategic opinions for promoting the fourth industry revolution through the supply of 5G additional frequency. The assessments are on the basis of 5G frequency utilization technologies and services, with reference to 3GPP 5G New Radio standards, after investigating the domestic 1G, 2G, 3G, 4G, and 5G mobile communication services as well as the use of mobile radio frequency and spectrum. The presented opinions contain the frequency supply of contiguous-wide bandwidth channels, harmonized frequency supply between licensed and unlicensed spectrum, the existing 4G frequency recycle for increasing 5G coverage and capacity, balance frequency supply in the multi-band for 5G services, and the development of 5G vertical frequency for industry. The aim is that the presented five strategic opinions can offer guidance for the upcoming plan of domestic 5G additional frequency supply.

Rectangular Microstrip Patch Antenna with Semicircular Structure for 5G Applications (5G 응용을 위한 반원형 구조를 가진 사각형 마이크로스트립 패치 안테나)

  • Kim, Yeong-Jin;Maharjan, Janam;Choi, Dong-You
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.23 no.10
    • /
    • pp.1269-1274
    • /
    • 2019
  • The paper presents a design of simple four-element microstrip-patch array antenna that is suitable for 5G applications. The proposed array consists of four rectangular microstrip patch elements with semicircular etches made on both sides of each elements. The antenna is fed using the combination of series and corporate feeding networks. The size of the ground is also changed to improve the antenna frequency. Finally, yagi elements are also added to improve the directive gain of the antenna. The presented microstrip patch array is able to achieve wide frequency bandwidth of 21.95-31.86 GHz. The antenna has also attained gain of 9.7 dB at 28 GHz and has maintained high gain and high directivity throughout the frequency band. The proposed array antenna fed by series-corporate feeding network, with low profile and simple structure is a good candidate for 5G applications.

Growth characteristic of lettuce (Lactuca sativa L.) based on Pulse Width modulation of artificial light sources with UV-A. (UV광원을 포함한 인공광원의 펄스폭 변조에 따른 적치마 상추의 생육특성)

  • Kwak, Su-Ji;Kwak, Eun-Ji;Lee, Hyun-Hee;Lee, Seung-Ki;Han, Jae-Woong;Jeon, Myung-Jin;Kim, Woong
    • Proceedings of the Korean Society for Agricultural Machinery Conference
    • /
    • 2017.04a
    • /
    • pp.123-123
    • /
    • 2017
  • 식물공장 내 작물의 생육은 제공되는 인공광원의 광원 및 광질에 영향을 받으며, 광흡수 파장에 따라 다르다. 또한 광합성에 효과적인 형태의 빛의 계속적인 빛의 조사보다는 광 펄스를 조절하여 공급하여 준다면 더욱더 효과적인 생육 환경을 제공해 줄 수 있다. 식물의 최적 생장을 위해 특정 파장대의 빛을 선택적으로 조사할 수 있는 LED특성을 사용하여 UV광원을 포함한 인공광원의 펄스폭 변조에 따른 적치마 상추의 생육특성을 알아보고자 하였다. 광환경은 Red(660 nm), Blue(450 nm), UV(395 nm) LED를 8:1:1 비율로 광량 $160{\mu}mol{\cdot}m^2{\cdot}s^{-1}$, 주파수 1.25, 2.5, 3.75, 5.0 kHz로 조사하여 주었으며, 온도 $20{\sim}23^{\circ}C$, 습도 50~60%, $CO_2$농도 1,000 ppm으로 조성하여 주었다. 아시아종묘 적치마상추를 파종 후 18일 째 되는날 정식, 정식 후 14일 28일 째 되는날 SPAD, 지상부 지하부의 생체중 및 건물중, 엽폭, 엽장을 측정하였으며, 측정한 엽폭과 엽장을 이용하여 엽형지수 산출, 지상부 지하부 생체중 값을 이용하여 S/R율을 산출하였다. SPAD 측정결과 생육시기가 증가할수록 SPAD함량은 감소하였으며, 1.25와 2.5 kHz에서 생육 시기 증가에 대한 SPAD함량 감소가 컸고, 3.75와 5.0 kHz의 경우 SPAD함량의 감소량은 작았다. 지상부 생체중은 3.75 kHz에서 121.51 g으로 가장 높은 값을 나타냈으며, 2.5, 1.75, 5.0 kHz 순으로 높은 값을 나타났다. 지하부 생체중의 경우 3.75 kHz에서 31.31 g으로 가장 높은 값을 나타냈으며 2.5, 5.0, 1.25 kHz 순으로 높게 나타났다. 엽형지수는 생육 시기가 증가에 따라 감소하는 것으로 나타났으며, 1.75, 2.5, 5.0, 3.75 kHz 순으로 크게 나타났다. 지상부 건물중 측정결과는 지상부 생체중 결과와, 지하부 건물중의 측정결과는 지하부 생체중 결과와 동일하였다. S/R율은 1.75 kHz를 제외하고 생육시기가 증가할수록 S/R율은 감소하는 것으로 나타났으며, 주파수가 높아질수록 S/R율은 감소하는 것으로 나타났다. 엽형지수는 엽폭/엽장으로 엽형지수를 산출한 결과로 값이 작을수록 엽폭이 넓은 형태를 의미하며, 생체중값이 가장 크게 나타났던 3.75 kHz에서 엽형지수의 값이 가장 낮게 나타났으며 3.75 kHz를 제외하고 주파수가 높을수록 엽형지수의 값이 낮게 나타났다. 이에 주파수에 따른 적상추의 생육은 3.75 kHz에서 가장 좋은 것으로 판단할 수 있었다.

  • PDF

0.11μm CMOS Low Power Broadband LNA design for 3G/4G LTE Environment (3G, 4G LTE 환경에 적합한 0.11μm CMOS 저전력, 광대역의 저잡음증폭기 설계)

  • Song, Jae-Yeol;Lee, Kyung-Hoon;Park, Seong-Mo
    • The Journal of the Korea institute of electronic communication sciences
    • /
    • v.9 no.9
    • /
    • pp.1027-1034
    • /
    • 2014
  • We present the Low Power Broadband Low noise amplifier(LNA) that can be applied a whole bandwidth from 3G to 4G LTE. This multi input LNA was designed to steadily amplify through a multi input method regardless the size of the input signal and operate on a wide range of frequency band from a standard 3G CDMA band 1.2GHz to LTE band 2.5GHz. The designed LNA consumes an average of 6mA on a 1.2V power supply and this was affirmed using computer simulation tests. The amplification which was corresponded to the lowest input signal is at a maximum of 20dB and was able to obtain the minimum value of the gain of -10dB. The Noise figure is less than 3dB at a High-gain mode and is less than 15dB at a Low-gain mode.

CMOS ROIC for MEMS Acceleration Sensor (MEMS 가속도센서를 위한 CMOS Readout 회로)

  • Yoon, Eun-Jung;Park, Jong-Tae;Yu, Chong-Gun
    • Journal of IKEEE
    • /
    • v.18 no.1
    • /
    • pp.119-127
    • /
    • 2014
  • This paper presents a CMOS readout circuit for MEMS(Micro Electro Mechanical System) acceleration sensors. It consists of a MEMS accelerometer, a capacitance to voltage converter(CVC) and a second-order switched-capacitor ${\Sigma}{\Delta}$ modulator. Correlated-double-sampling(CDS) and chopper-stabilization(CHS) techniques are used in the CVC and ${\Sigma}{\Delta}$ modulator to reduce the low-frequency noise and DC offset. The sensitivity of the designed CVC is 150mV/g and its non-linearity is 0.15%. The duty cycle of the designed ${\Sigma}{\Delta}$ modulator output increases about 10% when the input voltage amplitude increases by 100mV, and the modulator's non-linearity is 0.45%. The total sensitivity is 150mV/g and the power consumption is 5.6mW. The proposed circuit is designed in a 0.35um CMOS process with a supply voltage of 3.3V and a operating frequency of 2MHz. The size of the designed chip including PADs is $0.96mm{\times}0.85mm$.

Design of a 2.5Gbps CMOS CDR for Optical Communications (광통신 응용을 위한 2.5Gbps CMOS CDR회로 설계)

  • Kim, T.J.;Park, J.K.;Lee, K.H.;Cha, C.H.;Yu, C.G.
    • Proceedings of the KIEE Conference
    • /
    • 2008.10b
    • /
    • pp.509-510
    • /
    • 2008
  • 본 논문은 $0.18{\mu}m$ CMOS 공정을 사용하여 2.5Gb/s CMOS CDR을 설계하였다. CML type의 논리게이트를 이용하여 보다 높은 주파수의 대역의 데이터를 복원하기 위한 위상비교기(PD)와 PD의 up과 down신호를 지연없이 루프필터(LF)에 공급하기 위한 전하점프(CP) 그리고 외부 스위치를 통해 VCO이득을 조절할 수 있는 링 타입의 VCO로 구성되었다. 또한 VCO의 부담을 줄이기 위하여 half-rate 클럭 테크닉을 사용하였다. Cadence tool을 사용하여 모의실험 및 layout을 하였다. VCO이득은 100MHz/V이고, 클릭 jitter는 rising일 때 27ps, falling일 때 32ps로 우수한 결과를 얻을 수 있었다. 테스트칩 제작은 매그나침 $0.18{\um}$ CMOS 공정을 이용하였다. 칩 사이즈는 PAD를 포함하여 $850um{\times}750um$이다.

  • PDF

Capacitive Voltage Divider for a Pulsed High-Voltage Measurement (펄스형 고전압 측정용 용량성 전압 분배기)

  • Jang, S.D.;Oh, J.S.;Son, Y.G.;Cho, M.H.
    • Proceedings of the KIEE Conference
    • /
    • 2001.07c
    • /
    • pp.1612-1615
    • /
    • 2001
  • 포항 방사광 가속기 2.5 GeV의 전자선형 가속기는 마이크로웨이브 발생원으로써 80 MW 클라이스트론(klystron) 11대와 입사부에 65 MW 클라이스 트론 1대를 사용한다. 전자빔 에너지의 효율적인 제어를 위하여 고출력 클라이스트론의 RF 전력과 입력 빔의 전력을 정확하게 측정해야 하며 응답특성이 양호한 측정장치와 정밀한 측정이 요구된다. 클라이스트론에 공급되는 전력은 캐소드에 인가되는 전압과 전류의 측정치로 계산된다. 비록 빔 전압측정에서의 작은 오차일지라도 클라이스트론 RF 출력 전력의 결과값에 큰 영향을 미친다. 따라서, 빔 전압의 측정시에 정확한 측정을 위하여 특별한 주의가 요구된다. 고전압 펄스전원장치 인 모듈레이터 (modulator)에서 발생되는 수백 kV(350-400 kV)의 전압을 측정하기 위하여 커패시터의 용량비로 입력전압을 분압하는 용량성 분압기(capacitive voltage divider, CVD)가 사용된다. 고압측 분압용 표준 콘덴서의 정전용량을 결정하는 주요인자는 고전압 절연유의 유전율(dielectric constant)이다. 그러므로, 측정범위 내의 전압, 주파수, 온도에 대하여 정전용량의 변화율이 작도록 설계하여야 한다. 본 논문에서는 펄스형 고전압 신호 측정을 위한 용량성 전압 분배기의 측정원리, 설계분석, 교정시험, 절연유의 온도변화에 따른 정전용량 변화 특성에 대한 실험 결과를 고찰하고자 한다.

  • PDF

Corrosion Rate of Buried Pipeline by Induced Alternating Current (교류가 유도되는 매설배관에서의 교류 부식속도 측정에 관한 연구)

  • Song H. S.;Kim Y. G.;Lee S. M.;Kho Y. T.;Park Y. S.
    • Journal of the Korean Institute of Gas
    • /
    • v.5 no.3 s.15
    • /
    • pp.63-72
    • /
    • 2001
  • An alternating current (AC) corrosion using coupon and electric resistance (ER) probe has been studied. Coupon coupled with ER probe were applied in terms of AC voltage from high value to low value through the survey of AC voltages on buried gas transmission pipeline over the country. Parameters such as AC current density of coupon, AC voltage, cathodic protection potential, soil resistivity and frequency were monitored continually. Corrosion induced by AC was observed even under cathodically protected condition that met cathodic protection criterion (below -850mv vs. CSE). Corrosion rate was affected mainly not by AC voltage but by both of frequency and AC current density. An experimental corrosion rate relationship could be obtained statistically, In which AC corrosion rate increased linearly with effective AC current density and its slope was 0.619 in case of coupon and 0.885 in case of ER probe.

  • PDF

Effects of Green Tea Catechin on Microsomal Phospholipase A2 Activity and Arachidonic Acid Cascade in Rat Lung Exposed to Microwave (마이크로웨이브를 조사한 흰쥐 폐조직의 Phospholipae A2 활성과 Arachidonic Acid Cascade계에 미치는 녹차 Catechin의 영향)

  • Kim, Mi-Ji
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.41 no.7
    • /
    • pp.936-942
    • /
    • 2012
  • In the present study, the effects of green tea catechin on microsomal phospholipase $A_2$ ($PLA_2$) activity and the arachidonic acid (AA) cascade in the lungs of microwave exposed rats were investigated. One Sprague-Dawley male rats weighting $100{\pm}10$ g was randomly assigned to the normal group and three were assigned to the microwave exposed groups. The microwave exposed groups were subdivided into three groups according to the levels of dietary catechin supplementation: catechin free diet (MW) group, 0.25% catechin (MW-0.25C) group and 0.5% catechin (MW-0.5C) group. Rats were sacrificed on the 6th day after microwave irradiation (2.45 GHz, 15 min). The lung microsomal $PLA_2$ activity in the MW and MW-0.25C groups was 30% and 15% greater than that of the normal group, respectively, whereas no significant difference between the normal group and MW-0.5C group was observed. The percentage of phosphatidylethanolamine (PE) hydrolyzed in the lung microsome in the MW, MW-0.25C and MW-0.5C group increased by 47%, 18% and 20%, respectively, due to microwave irradiation. The formation of thromboxane $A_2$ ($TXA_2$) in the lung microsome was 50% greater in the MW group than in the normal group. However, the levels of $TXA_2$ in the MW-0.25C and MW-0.5C group were normal. The formation of prostacyclin ($PGI_2$) in the lung microsome was 31% lower in the MW group than in the normal group, while the levels of $PGI_2$ in the MW-0.25C and MW-0.5C group were similar to the normal group. The lung microsomal thiobarbituric acid reactive substances (TBARS) concentration, which can be used as an index of lipid peroxide was 34% greater in the MW group, when compared with the normal group. However, there was no difference between the MW-0.25C, MW-0.5C and normal groups. In conclusion, lung function appeared to be improved by green tea catechin supplementation due to its antithrombus action, which in turn controls the AA cascade system.

Development of Frequency Weighing Sensor and Single Crystal Growth (새로운 무게센서 재발과 단결정성장(1))

  • Jang Y.N.;Sung N.H.;Chae S.C.;Bae I.K.;Kim I.J.
    • Korean Journal of Crystallography
    • /
    • v.8 no.1
    • /
    • pp.38-47
    • /
    • 1997
  • A new weighing sensor for the automatic diameter control system of the crystal growth is developed in this study. This weighing sensor measures the frequency of the vibrating element which is lineally changing with respect to weight. The signal and the power of this system are transmitted without any physical contact, so that this sensor offers high accuracy and resolution. This system consists of a string, a sinusoidal wave generator, an automatic amplification adjusting circuit, signal transformers and a PCB. 4 kinds of programs are developed for checking DAC, weight calibration and controlling growth process. The measurements of the standard deviation and the resolution show $\pm0.10g$(measured at every second) and $5{\times}10^{-5}$, respectively, This weighing sensor is effective under high pres-sure of 200 atm, high temperature and vacuum condition. The weighing system can control the temperature in the accuracy of $\pm0.025^{\circ}C$ with the 'signal divider'. The optical quality single crystals of $(YGd)_3Sc_2Ga_3O_{12},\;Er-Y_3Sc_2Al_3O_{12},\;and\;Bi_{12}GeO_{20}$ have been grown by Czo-chralski method using this auto-diameter control system.

  • PDF