• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.3
• /
• pp.325-336
• /
• 2009

The purpose of this study was to investigate the eruption pattern of the mandibular first molar in sagittal, frontal and horizontal views using the cone beam CT scanning. CT images were obtained from healthy 83 children (42 boys, 41 girls) between 3 to 10 years of age with a normal dentition according to Nolla stage. 1. In the frontal and horizontal view, the intermolar width decreased continuously with stage and slightly increased at the last stage. 2. In the sagittal and frontal view, eruption distances from occlusal plane were observed the largest change between stage 5 and 7. 3. In the horizontal and sagittal view, mandibular first molar from distal surface of primary second molar moved distally between stage 4 and 6. 4. In the sagittal view, angle from occlusal plane to mesio-distal axis increased between stage 4 and 8. 5. In the frontal view, angle from occlusal plane to bucco-lingual axis increased continuously during all stage. 6. In the horizontal view, angle from midsagittal plane to long axis increased between stage 5 and 8.

• Korean Journal of Computational Design and Engineering
• /
• v.15 no.5
• /
• pp.354-361
• /
• 2010

The paper presents an efficient computation of optimal tool length for 5-axis mold & die machining. The implemented procedure processes an NC file as an initial input, where the NC data is generated by another commercial CAM system. A commercial CAM system generates 5-axis machining NC data which, in its own way, is optimal based on pre-defined machining condition such as tool-path pattern, tool-axis control via inclination angles, etc. The proper tool-length should also be provided. The tool-length should be as small as possible in order to enhance machinability as well as surface finish. A feasible tool-length at each NC block can be obtained by checking interference between workpiece and tool components, usually when the tool-axis is not modified at this stage for most CAM systems. Then the minimum feasible tool-length for an NC file consisting of N blocks is the maximum of N tool-length values. However, it can be noted that slight modification of tool-axis at each block may reduce the minimum feasible tool-length in mold & die machining. This approach can effectively be applied in machining feature regions such as steep wall or deep cavity. It has been implemented and is used at a molding die manufacturing company in Korea.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.5
• /
• pp.1216-1228
• /
• 2016

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.33 no.1
• /
• pp.23-30
• /
• 1988

This experiment was carried out to obtain the basic information for the improving of leaf quality by topping time and depth in flue-cured tobacco. Development of palisade parenchyma and spongy parenchyma were in order of button stage＆gt;early flower stage＆gt;late flower stage by topping time, and were in order of 4th leaf topping from floral axis＆gt;2nd leaf topping from floral axis＆gt;floral axis by topping depth. When 2nd leaf from floral axis were topped at late flower stage in A grade field and at early flower stage in B grade field, total sugar to nicotine ratio ralating to organoleptic characteristics were desirable as 9.0 and 9.7, and petroleum ether extract contents relating flavor of flue-cured tobacco were high as 9.9% and 8.4%, respectively. In ecological tissue, percentage of direct effect on quality were 43.2% in palisade parenchyma. 26.5% in spongy parechyma. 17.7% in tissue ratio, 6.7% in leaf thickness, 3.1% in intercellular space, 2.8% in leaf type and in chemical components, were 40.6% in nicotine. 35.7% in T-sugar/nicotine, 10.0% in total sugar, 7.0% in T-nitrogen/nicotine, 4.6% in total nitrogen, 2.1% in petroleum ether extract. The optimum topping depth were desirable at topping under second leaf from floral axis at late flower stage in A grade field and at early flower stage in B grade field for good leaf quality.

• Current Optics and Photonics
• /
• v.5 no.4
• /
• pp.402-408
• /
• 2021

An off-axis system refers to an optical system in which the optical axis and normal vector at the vertex of each surface do not match. The most important specification in an optical system is its focal length. Among the various methods for measuring the focal length, the most suitable method for the off-axis system is the method that adopts magnification. However, head-mounted display (HMD) optics must be measured while considering the virtual image distance, which is not infinity owing to product characteristics. For the virtual image distance, a camera with a focusing function was used. By measuring HMD optics via this magnification method, the error generated in this measurement was 0.68% of the HMD's focal length, which is within the 1%-3% range of the conventionally permitted design error for the focal length allowed at the optical design stage. Therefore, it can be verified that the measurement accuracy of the method proposed in this study is sufficiently feasible in practice.

• Toxicological Research
• /
• v.11 no.1
• /
• pp.37-42
• /
• 1995

Effect of cadmium on the early amphibian development was analyzed through FETAX (Frog Embryo Teratogenesis Assay: Xenopus). Embryos manifested concentration-dependent mortality and realformations; shortage of anterior-posterior axis gut realformation, ocular anomalies, bent notochord, misshapen dorsal fin, and derreal blisters. The treatment with 1.5ppm cadmium solution caused 100% mortality and concentration of lppm did not kill the embryos that caused 100% anomaly. The teratogenic index (TI = LC50 /EC50) was 2.8 indicating that $CdCl_2$ is teratogenic for Xenopus laevis. Embryos that were pulsetreated with at early to late blastula stage (St. 3-9) and mid to late blastula stage (St. 6-10) showed relatively strong resistance to cadmium, but the embryos treated at gastrula stage (St. 10-13) showed high mortality. And the embryos treated at tailbud stage (after St. 25) showed highest mortality of any other early stages. Effects of temperature were studied through pulse- treatment during gastrula stage at $20^{\circ}C$ and $30^{\circ}C$. The embryos treated with 7.5ppm at $30^{\circ}C$ and 15ppm at $20^{\circ}C$ caused 100% mortality respectively, indicating that higher temperature had more severe toxic effect. One of the most peculiar effect of cadmium at gastrulation was distortion of the tail. The probable cause of toxic effect of Cd was discussed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.771-772
• /
• 2013

• Journal of the Semiconductor & Display Technology
• /
• v.6 no.4
• /
• pp.23-27
• /
• 2007

Rotary stages in semiconductor, display industry and many other fields require challenging accuracy to perform their functions properly. Especially, Axis of rotation error on rotary system is significant; such as the spindle error motion of the aligner, wire bonder and inspector machine which result in the poor quality products. To evaluate and improve the performance of such precision rotary stage, undesired movements on the other 5 degrees of freedom of the rotary stage must be measured and analyzed. In this paper, we have measured the three translations and two tilt motions of the worm gear type spindle with high precision capacitive sensors. To obtain the radial error motion, we have used Donaldson's reversal technique. And the axial components of the spindle tilt error motion can be obtained accurately from the axial direction outputs of sensors by Estler face motion reversal technique. Further more we have designed and developed the sensor mounting jig with standard cylinder for reversal method.

• Journal of Electrochemical Science and Technology
• /
• v.3 no.1
• /
• pp.29-34
• /
• 2012

The structural changes of $Li_{1-x}Ni_{0.5}Co_{0.2}Mn_{0.3}O_2$ cathode material for lithium ion battery during the first charge was investigated in comparison with $Li_{1-x}Ni_{0.8}Co_{0.15}Al_{0.05}O_2$ using a synchrotron based in situ X-ray diffraction technique. The structural changes of these two cathode materials show similar trend during first charge: an expansion along the c-axis of the unit cell with contractions along the a- and b-axis during the early stage of charge and a major contraction along the c-axis with slight expansions along the a- and b-axis near the end of charge at high voltage limit. In $Li_{1-x}Ni_{0.5}Co_{0.2}Mn_{0.3}O_2$ cathode, however, the initial unit cell volume of H2 phase is bigger than that of H1 phase since the c-axis undergo large expansion while a- and b- axis shrink slightly. The change in the unit cell volume for $Li_{1-x}Ni_{0.5}Co_{0.2}Mn_{0.3}O_2$ during charge is smaller than that of $Li_{1-x}Ni_{0.8}Co_{0.15}Al_{0.05}O_2$. This smaller change in unit cell volume may give the $Li_{1-x}Ni_{0.5}Co_{0.2}Mn_{0.3}O_2$ cathode material a better structural reversibility for a long cycling life.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.5 s.182
• /
• pp.93-102
• /
• 2006

This paper proposes a controller design analysis for three-axis CNC systems considering both contouring and tracking performance. The proposed analysis inclusively combines axial controllers for each individual feed drive system together with cross-coupling controller at the beginning design stage as an integrated manner. These two controllers used to be separately designed and analyzed since they have different control objectives. The proposed scheme includes a stability analysis for the overall control system and a performance analysis in terms of contouring and tracking accuracy. Computer simulation is performed and the results show the validity of the proposed methodology. Further, the results can be used as a basic guideline in systematic and comprehensive controller design for multi-axis CNC systems.