• 제목/요약/키워드: 5-MW

검색결과 997건 처리시간 0.027초

L-페닐알라닌 대량생산을 위한 재조합 플라스미드 구성 (Construction of Plasmids for Overproduction of L-Phenylalanine)

  • 이새배;박청;원찬희;최덕호;임번삼
    • 미생물학회지
    • /
    • 제28권2호
    • /
    • pp.169-173
    • /
    • 1990
  • E. coli를 이용하여 L-phenylalanine을 대량 생산하기 위한 재조합 플라스미드 pMW10, pMW11과 pMW 12를 구성하였다. L- Phenylalanine 생산을 위한 유전자 $aroF^{FR}$, $pheA^{FR}$은 E. coli MWEC 101-5 균주로부터 분리하였다. 재조합 플라스미드를 함유하고 있는 E.coli 대사 조절변이주들의 L-phenylalanine 생산생과 안전성을 조사하여 $aroF^{FR}$, $pheA^{FR}$유전자들의 효율을 알아보았다. MWEC 101-5/pMW 11 균주에서는 24.3 g/I의 L-phenylalanine이 생산되었으나, 플라스미드의 안정성은 73.8%였다. 본 균주의 prephemte dehydratase, 고유 활동도는 E. coli K-12에 비하여 26배 증가된 것이다.

  • PDF

김치 starter용으로 개량된 내산성 변이주 Leuconostoc mesenteroides의 내산성 특성 (Properties of Acid Tolerance of Acid-Resistant Mutant Leuconostoc mesenteroides Which Was Improved as Kimchi Starter.)

  • 김영찬;정은영;김은해;정대현;정선호;이동희;권태종;강상모
    • 한국미생물·생명공학회지
    • /
    • 제26권2호
    • /
    • pp.102-109
    • /
    • 1998
  • 김치 starter로 개량된 내산성 변이균주 M-100이 획득한 증가된 내산성에 관한 생리적 성질을 규명하기 위하여 수소 이온 투과도, ATPase 활성, 해당 작용 활성, $Mg^{2+}$ 해리도 그리고 막지방산 조성등을 그것의 야생균주 Mw와 비교 분석하였다. 수소 이온 투과도 실험 결과 150mM KCI수용액 및 3% NaCl수용액에서 변이균주 M-100의 $t_{1/2}$값이 pH 4.0, 5.0 그리고 6.0에서 모두 야생 균주 Mw보다 낮은 값을 보였다. ATPase 활성의 결과에서도 전체 pH 범위에서 변이균주 M-100이 야생균주 Mw보다 높은 활성을 보였다. 해당 작용의 pH 의존성 결과에서는 최대 활성의 해당 작용이 일어나는 pH가 야생 균주 Mw는 5.0, 변이균주 M-100의 경우는 6.0으로 예상과는 약간 상이하였으나, pH 5.0을 제외한 전체적인 범위에서 변이균주 M-100의 해당 작용 활성이 야생균주 Mw보다 높게 유지됨을 확인하였다. $Mg^{2+}$ 해리도에 있어서는 pH 4에서 2시간 경과후 야생균주 Mw에 비해 변이균주 M-100이 약 1/3가량 적게 $Mg^{++}$이 유출되었다. 막지방산 조성의 변화는 환경상의 낮은 pH에 대한 반응 양상을 나타내는 중요한 지표로 측정된 결과를 보면, 야생균주 MW와 변이균주 M-100간의 비교결과 $C_{12}$, $C_{14}$, $C_{18:1}$, $C_{19:0cyclo}$ 등에서 주된 차이를 나타내었으며, 특히 $C_{18:1}$은 야생균주 Mw가 23.4%, 변이균주 M-100이 15.1%로서 변이균주M-100에서 감소된, $C_{19:0cyclo}$는 변이균주 M-100이 12.2%로, 야생균주 Mw이 10.2%에 비해 증가되었다.

  • PDF

Evaluating Efficiency of Coal Combustion Products (CCPs) and Polyacrylamide (PAM) for Mine Hazard Prevention and Revegetation in Coal Mine Area

  • Oh, Se Jin;Oh, Seung Min;Ok, Yong Sik;Kim, Sung Chul;Lee, Sang Hwan;Yang, Jae E.
    • 한국토양비료학회지
    • /
    • 제47권6호
    • /
    • pp.525-532
    • /
    • 2014
  • Since mine wastes were merely dumped in the mine waste dump, they have produced acid mine drainage (AMD). Therefore, main objective of this study was to evaluate the effect of coal combustion products (CCPs) on heavy metal stabilization and detoxification for mine wastes. Total six treatments for incubation test were conducted depending on mixing method (completely mixing and layered). Also, lysimeter experiment was conducted to examine efficiency of polyacrylamide (PAM) on reduction of mine wastes erosion. Result of incubation test showed that concentrations of soluble aluminium (Al) and iron (Fe) in leachate decreased compared to control. The lowest soluble Al and Fe in leachate was observed in 50% mixed treatment (14.2 and $1.03mg\;kg^{-1}$ for Al and Fe respectively) compared to control treatment (253.0 for Al and $52.6mg\;kg^{-1}$ for Fe). The pH of mine wastes (MW) and leachate increased compared to control after mixing with CCPs and ordered as control (MW 6.4, leachate 6.3) < 10% (MW 7.7, leachate 7.1) < 20% (MW 9.0, leachate 7.8) < 30% (MW 9.5, leachate 8.3) < 40% (MW 9.9, leachate 8.5) < 50% (MW 10.5, leachate 8.6). Application of PAM, both in liquid and granular type, dramatically decreased the suspended solid (SS) concentration of CCPs treatments. Reduction of SS loss was ordered as MW70CR30L ($24.4mg\;L^{-1}$) > MW70CR30LPL ($6.7mg\;L^{-1}$) > NT ($3.1mg\;L^{-1}$) > MW70CR30M ($1.6mg\;L^{-1}$) > MW70CR30MPL ($1.1mg\;L^{-1}$) > MW70CR30PGM ($0.7mg\;L^{-1}$) > MW70CR30LPG ($0.5mg\;L^{-1}$) > MW70CR30MPG ($0.4mg\;L^{-1}$). Overall, application of CCPs can be environmental friendly and cost-effective way to remediate coal mine wastes contaminated with heavy metals. In addition, use of PAM could help to prevent the erosion coal mine wastes in mine waste disposal area.

터빈설치를 위한 한국 연안 해상풍력발전 부존량 평가 (Assessment of Offshore Wind Power Potential for Turbine Installation in Coastal Areas of Korea)

  • 강금석;오남선;고동휘;정신택;황재동
    • 한국해안·해양공학회논문집
    • /
    • 제30권4호
    • /
    • pp.191-199
    • /
    • 2018
  • 본 연구에서는 한국 연안의 해상풍력 발전을 위한 적지를 검토하기 위해 기상청에서 제공하는 20개 지점의 풍속 자료를 수집하고 이를 분석하였다. 관측된 풍속 자료의 분석을 위하여 Rayleigh 모델과 Weibull 모델을 이용하였으며, 풍속 출현빈도에 따라 연간 부존량을 추정하였다. 풍력발전기 모델로는 출력 1.5~5 MW의 7종류를 선정하여 각각의 성능곡선을 이용하였다. 그 결과, 풍속이 7.15 m/s 이상인 지점에서는 Repower-5 MW의 터빈이 높은 에너지 생산이 가능한 것으로 나타났으나 그 이하의 풍속에서는 G128-4.5 MW의 터빈이 유리한 것으로 나타났다. 10 m/s 이상의 풍속 출현율이 높은 마라도, 거제도 및 포항의 경우 REpower사의 5 MW급 해상풍력발전기 설치 시 설비이용률이 56.49%, 50.92%, 50.08%로 높게 나타났다.

Study on the molecular weights of radioprotective ginseng proteins by HPLC method

  • Kim, Choon-Mi;Kim, Hyeon-Lim
    • Archives of Pharmacal Research
    • /
    • 제9권1호
    • /
    • pp.5-9
    • /
    • 1986
  • Partialy purified ginseng proteins were either treated with sodium dodecyl sulfate (SDS) and .betha.-mercaptoethanol to denature the proteins or not, and subjected to Thin Layer Chromatography (TLC) and High Performance Liquid Chromatography (HPLC) to compare the components of each fraction. Standard proteins of known molecular weights (MW) were also either treated with SDS and .betha.-mercaptoethanol or not, and subjected to HPLC to obtain regression lines for MW determination. From the retention times obtained from samples in eiether case by HPLC, the MW were estimated as following in SDS treated condition, Gl fraction showed three peaks each with MW of above 100, 000, 51, 000 and 19, 000. Gll showed one original peak with MW of 21, 000 and Gll, two peaks each with MW of 19, 000 and 14, 000. On the other hand, in non-SDS treated condition, GI fraction showed two peaks each with MW of above 200, 000 NA 52, 000. Gll showed one original peak with MW of 41, 000 and Gill, three peaks each with MW of 28, 000, 19, 000 and 14, 000.

  • PDF

765kV 송전선로 건설추진

  • 이석규;김우겸;이안근;신태우
    • 전기의세계
    • /
    • 제46권5호
    • /
    • pp.11-18
    • /
    • 1997
  • 다가오는 21세기는 삶의 질 향상과 산업의 선진국화 생활환경의 자동화 및 정보화로의 전이등으로 전력수요가 급격히 증가할 것이다. 장기 전력수요예측[1]에 의하면 1995년 29,878MW였던 최대부하가 2000년 43,500MW, 2005년 55,700MW, 2010년 65,600MW가 될 것으로 예측하고 있다. 이에 따라 커지는 전력유통을 원활하게 하기 위하여 한전에서는 기존 345kV 송전선로의 5배의 송전능력을 가진 765kV 송전선로를 건설하고 있다. 765kV 송전선로는 국내 최고의 전압으로서 최초로 건설될 뿐만 아니라 제 1단계로 건설에 착수한 물량도 340km를 일시에 시행하는 대규모이다. 이와같은 사업의 시작부터 지금까지 추진한 내용과 공사에 새롭게 적용하는 기술, 공법등에 대하여 기술하고자 한다.

  • PDF

1.5MW, 3MW 연료전지 EBOP UL 인증 획득 (UL Certification of 1.5MW, 3MW Fuel Cell EBOP)

  • 장주영;양승철;임재관;이정흠
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2012년도 추계학술대회 논문집
    • /
    • pp.141-142
    • /
    • 2012
  • 포스코 에너지에서는 약 13개월에 걸쳐 3MW급 발전용 연료전지용 전력변환장치인 EBOP 시스템의 UL(Underwriters Laboratories) 인증을 추진한 결과 2012년 6월부로 UL 인증을 획득하였다.

  • PDF

김해 딴섬의 고투수성 누수 피압대수층에서 수리전도도의 규모종속효과 (The Scale-dependent of Hydraulic Conductivity in Leaky Confined Aquifer with High Permeability at the Ttaan Isle, Gimhae City)

  • 김태영;강동환;김성수;김병우;권병혁
    • 지질공학
    • /
    • 제18권4호
    • /
    • pp.415-422
    • /
    • 2008
  • 강변여과수 개발예정지역인 낙동강과 밀양강의 합류지점에 위치한 김해시 딴섬 지역에 형성된 지표면하 $25{\sim}35\;m$ 구간의 고투수성 누수 피압대수층 내 수리전도도의 규모종속효과를 규명하기 위해 양수시험이 수행되었다. 양수시험 시 관측정은 양수정(PW)을 기준으로 남서 방항(MW1, MW2), 북동 방향(MW3, MW4)에 2 m와 5 m 간격으로 개발되었다. 양수시험은 $2,500\;m^3/day$의 양수율로 수행되었으며, 양수 후 경과시간에 따른 수위변화 자료를 AQTESOLV 3.5 프로그램에 입력하여 수리전도도를 산정하였다. 양수정에서 산정된 수리전도도는 $1.745{\times}10^{-3}\;m/sec$ 이었으며, 양수정과 MW1 공 사이의 수리전도도는 $2.452{\times}10^{-3}m/sec$, 양수정과 HW2공 사이의 수리전도도는 $2.161{\times}10^{-3}m/sec$, 양수정과 MW3 공 사이의 수리전도도는 $2.270{\times}10^{-3}m/sec$, 양수정과 MW4공 사이의 수리전도도는 $2.591{\times}10^{-3}m/sec$로 산정되었다. 양수정과 관측정의 이격거리(d)에 따른 수리전도도(K) 증가함수는 남서 방향(PW-MW1-MW2 라인)에서는 logK = 0.0693logd - 2.671, 북동 방향(PW-MW3-MW4 라인)에서는 logK = 0.0817logf - 2.655로 추정되었다. 양수정을 기준으로 남서 방향과 북동 방향 대수층에서의 이격거리에 대한 수리전도도 증가함수는 유사하였다. Schulze-Makuch et al. (1999)의 규모지수 산정방법을 적용하여, 시험대수층의 시험부피에 대한 수리전도도의 규모지수를 산정하였다. 본 시험대수층의 규모지수는 0.15로서 낮게 나타났으며, 이는 시험대수층이 고투수성 자갈층으로서 불균질성이 매우 낮음을 의미한다. 양수시험에 의해 산정된 투수량계수, 양수시험 시 최대수위변화, 양수정과 관측공 간의 거리 및 양수율에 의해 산정된 영향반경은 남서 방향 7.148 m, 북동 방향 6.912 m로 산정되었다. 양수정에서 영향반경까지의 수리전도도 증가율은 남서 방향 1.40배, 북동 방향 1.49배 정도로서 본 시험대수층 매질의 불균질성이 북동 방향에서 약간 높은 것으로 나타났다.

Dietary inclusion of mealworm (Tenebrio molitor) meal as an alternative protein source in practical diets for rainbow trout (Oncorhynchus mykiss) fry

  • Jeong, Seong-Mok;Khosravi, Sanaz;Mauliasari, Intan Rizki;Lee, Sang-Min
    • Fisheries and Aquatic Sciences
    • /
    • 제23권5호
    • /
    • pp.12.1-12.8
    • /
    • 2020
  • Background: An 8-week feeding trial was designed to evaluate the potential of yellow mealworm (MW; Tenebrio molitor) as a locally available nutrient-rich feedstuff for rainbow trout fry (Oncorhynchus mykiss). Methods: Triplicate groups of fish (mean ± SE; 1.11 ± 0.01 g) were assigned to each of the five isonitrogenous and isocaloric practical diets containing graded level of a full fat MW (0, 7, 14, 21, and 28%) at the expense of fish meal (designated as MW0, MW7, MW14, MW21, and MW28, respectively). Results: Fish growth performance in terms of weight gain and specific growth rate significantly increased with increasing dietary MW level up to 14% and then declined when dietary MW levels further increased to 28%. Significantly higher protein efficiency ratio and lower feed conversion ratio were found in fish fed with diets containing MW compared to fish fed the control MW0. Myeloperoxidase activity was significantly higher in fish fed MW7 diet compared to fish fed the MW0 diet. Fish fed the MW14 and MW28 diets had significantly higher lysozyme activities than those fed the MW0 diet. Conclusions: Overall, the efficacy of MW as promising alternative to fish meal in practical diets for rainbow trout fry has been proved not only in relation to growth rates and feed utilization, but also from the viewpoint of immunopotentiation effects.

5MW 연구용 원자로의 1차 냉각 계통 유동 특성 (Flow Characteristics of a Primary Cooling System in 5 MW Research Reactor)

  • 박용철;이용섭
    • 한국유체기계학회 논문집
    • /
    • 제13권5호
    • /
    • pp.5-10
    • /
    • 2010
  • 5MW, open pool type research reactor, is commonly used to education and experimental purpose. It is necessary to prepare a standardization of system designs for considering a demand. HANARO has prepared the standardization of 5MW research reactor system designs based on the design, installation, commissioning and operating experiences of HANARO. For maintaining an open pool type reactor safety, a primary cooling system (after below, PCS) should remove the heat generated by the reactor under a reactor normal operation condition and a reactor shutdown condition. For removing the heat generated by the reactor, the PCS should maintain a required coolant flow rate. For a verification of the required flow rate, a flow network analysis of the PCS was carried under a normal operating condition. Based on the flow network analysis result, this paper describes the PCS flow characteristics of a 5MW open pool type research reactor. Through the result, it was confirmed that the PCS met design requirements including design flow rate without cavitation.