• 한국멀티미디어학회논문지
• /
• 제13권3호
• /
• pp.417-429
• /
• 2010

배경 제거를 위한 많은 연구가 있어왔음에도 기존의 방법들을 실제 환경에 효과적으로 적용하기에는 아직도 많은 어려움이 있다. 본 논문에서는 배경 제거를 실제 환경에 적용하면서 만나게 되는 다양한 문제들을 해결하기 위해 기존의 가우시안 혼합 모델 방법을 개선하는 배경 제거 방법을 제안한다. 첫째로 제안한 방법은 낮은 계산량을 얻기 위하여 고정 소수점 연산을 이용하였다. 배경 모델링 과정은 변수들의 높은 정밀도를 요구하지 않기 때문에 제안한 방법에서는 고정 소수점 변수를 이용함으로서 정확도를 유지한 채 연산 속도를 크게 향상시킬 수 있었다. 두 번째로 보행자들의 높은 통행량 하에서 흔히 발생되는 전경 객체가 배경으로 학습되는 문제를 피하기 위하여 각 화소의 정적인 정도를 이용하여 배경 모델의 학습 속도를 동적으로 조절하였다. 즉 최근 화소 값에 큰 차이가 발생한 화소들은 배경 영역이 아닐 가능성이 높으므로, 이에 대해 낮은 학습 비율을 적용함으로써 높은 통행량을 보이는 영상에서도 유효한 배경 모델을 유지하는 것이 가능했다. 마지막으로 영상의 빠른 밝기값 변화에 대응하기 위하여 연속한 두 프레임 간의 밝기 변화를 선형 변환으로 추정하였으며, 훈련된 배경 모델을 이 선형 변환에 의해 직접적으로 변환시켜 주었다. 제안한 고정 소수점 연산에 의해 기존의 가우시안 혼합 배경 모델링 방법을 구현한 결과 배경 제거에 기존 방법의 약 30%의 연산시간 만을 필요로 하였다. 또한 제안한 방법을 실제 환경의 영상에 적용한 결과 기존의 배경 제거 방법에 비해 검출률이 약 20% 향상되었으며, 오검률은 5~15% 가량 낮아지는 것을 확인하였다.

• 한국광학회지
• /
• 제10권5호
• /
• pp.373-378
• /
• 1999

투명한 유전체 박막과 관련된 측정 분야는 반도체 산업의 발전과 함께 급속히 성장하고 있으며, 회로의 고집적화 추세에 맞추어 고정밀도의 측정 성능을 요구하고 있다. 최근 웨이퍼의 광역 평탄화를 위한 CMP(chemical mechanical polishing)공정의 도입으로 인하여 박막의 두께뿐만 아니라 미세 형상에 대한 측정 요구가 증가하고 있다. 이 논문에서는 기존의 비접촉 표면 형상 측정법의 하나인 백색광 주사 간섭법을 이용하여 박막의 두께 형상을 측정하여 새로운 측정 알고리즘 제시하고자 한다. 이 방법은 기존의 백색광 간섭 신호 해석법의 하나인 주파수 분석법과 비선형 최소 자승법을 이용함으로써 구현된다. 그리고 실험을 통하여 개발된 알고리즘의 타당성을 검증한다.

• Journal of Positioning, Navigation, and Timing
• /
• 제6권3호
• /
• pp.125-133
• /
• 2017

Time comparison is necessary for the verification and synchronization of the clock. Two-way satellite time and frequency (TWSTFT) is a method for time comparison over long distances. This method includes errors such as atmospheric effects, satellite motion, and environmental conditions. Ionospheric delay is one of the significant time comparison error in case of the carrier-phase TWSTFT (TWCP). Global Ionosphere Map (GIM) from Center for Orbit Determination in Europe (CODE) is used to compare with Bernese. Thin shell model of the ionosphere is used for the calculation of the Ionosphere Pierce Point (IPP) between stations and a GEO satellite. Korea Research Institute of Standards and Science (KRISS) and Koganei (KGNI) stations are used, and the analysis is conducted at 29 January 2017. Vertical Total Electron Content (VTEC) which is generated by Bernese at the latitude and longitude of the receiver by processing a Receiver Independent Exchange (RINEX) observation file that is generated from the receiver has demonstrated adequacy by showing similar variation trends with the CODE GIM. Bernese also has showed the capability to produce high resolution IONosphere map EXchange (IONEX) data compared to the CODE GIM. At each station IPP, VTEC difference in two stations showed absolute maximum 3.3 and 2.3 Total Electron Content Unit (TECU) in Bernese and GIM, respectively. The ionospheric delay of the TWCP has showed maximum 5.69 and 2.54 ps from Bernese and CODE GIM, respectively. Bernese could correct up to 6.29 ps in ionospheric delay rather than using CODE GIM. The peak-to-peak value of the ionospheric delay for TWCP in Bernese is about 10 ps, and this has to be eliminated to get high precision TWCP results. The $10^{-16}$ level uncertainty of atomic clock corresponds to 10 ps for 1 day averaging time, so time synchronization performance needs less than 10 ps. Current time synchronization of a satellite and ground station is about 2 ns level, but the smaller required performance, like less than 1 ns, the better. In this perspective, since the ionospheric delay could exceed over 100 ps in a long baseline different from this short baseline case, the elimination of the ionospheric delay is thought to be important for more high precision time synchronization of a satellite and ground station. This paper showed detailed method how to eliminate ionospheric delay for TWCP, and a specific case is applied by using this technique. Anyone could apply this method to establish high precision TWCP capability, and it is possible to use other software such as GIPSYOASIS and GPSTk. This TWCP could be applied in the high precision atomic clocks and used in the ground stations of the future domestic satellite navigation system.

• 한국공작기계학회논문집
• /
• 제11권5호
• /
• pp.53-57
• /
• 2002

The chatter to raise grinding operating is reduce the precision and the quality. In this study, In reply to AE signal and the normal force generated in the grinding operating were measured (1) the amplitude in the mathematical model of the normal force is the form as to transform an exponential (2) the chatter growth is minus point of an exponent. (3) From the observed wheel aspect after the chatter growth, it was to investigated the concern of the chatter growth and the wheel life.

• 한국산업융합학회 논문집
• /
• 제25권4_2호
• /
• pp.573-586
• /
• 2022

Corrosion can cause dangerous and expensive damage and failures of ship hulls and equipment. Therefore, it is necessary to maintain the vessel by periodic corrosion inspections. During visual inspection, many corrosion locations are inaccessible for many reasons, especially safety's point of view. Including subjective decisions of inspectors is one of the issues of visual inspection. Automation of visual inspection is tried by many pieces of research. In this study, we propose image preprocessing methods by image patch segmentation and thresholding. YOLOv5 was used as an object detection model after the image preprocessing. Finally, it was evaluated that corrosion detection performance using the proposed method was improved in terms of mean average precision.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2008년도 추계학술발표대회
• /
• pp.656-657
• /
• 2008

Light Detection and Ranging (LiDAR) data has been used to detect the objects of earth surface from huge point clouds gotten from the laser scanning system equipped on airplane. According to the precision of 3~5 points per square meter, objects like buildings, cars and roads can be easily described and constructed. Many various areas, such as hydrological modeling and urban planning adopt this kind of significant data. Researchers have been engaging in finding accurate road networks from LiDAR data recent years. In this paper, A novel algorithm with regard to extracting road points from LiDAR data has been developed based on the continuity and structural characteristics of road networks.

• 대한원격탐사학회지
• /
• 제35권5_1호
• /
• pp.705-714
• /
• 2019

고해상도 UAV 영상의 다양한 활용을 위해서는 정밀한 위치보정이 필요하다. 이를 위해 지상기준점을 선정하는 것이 일반적이지만 긴급상황이나 지상기준점 선정이 어려운 경우에는 지상기준점없이 촬영을 수행해야 한다. 본연구에서는 지상기준점 없이 생성된 UAV 기반 3차원 point cloud 데이터의 x, y 좌표에 대한 위치 정확도 향상방법을 제안하였다. 위치정확도 향상을 위한 기준 데이터로 공공데이터포털에서 제공하는 벡터파일 중 도로 정보를 이용하였다. 2차원 정사보정 영상의 기하보정을 먼저 수행하고, 이 과정에서 산출된 변환행렬을 3차원 point cloud에 적용하는 방법을 채택하였다. 보정 전 약 34.54 m의 직선 거리 차이가 보정 후 약 1.21 m 로 감소하였다. 지상기준점 선정없이 획득된 UAV영상의 2차원 및 3차원 영상의 위치정확도 향상이 가능함을 확인함에 따라 타 공간정보 데이터와의 연계 및 호환 등이 가능해져 point cloud 데이터에서 획득된 3차원 공간 객체의 활용 범위의 확대를 기대한다.

• 분석과학
• /
• 제32권2호
• /
• pp.48-55
• /
• 2019

The simple and effective analytical method for the quality control of a novel scalp tonic formulation has been developed and optimized in terms of HPLC conditions and sample preparation method, meanwhile, the optimization of preparation condition was using response surface methodology (RSM) based on central composite design (CCD). Oleanolic acid was selected as marker compound because of its bioactivities for alopecia therapy. The developed analytical method and extraction condition were successfully qualified. Coefficient of determination ($r^2$) for the calibration was 0.9997 with a line passing through the origin point in the range of 0.1-100 mg/mL. The limit of detection (LOD) and the limit of quantitation (LOQ) were 17.5 ng/mL and 55.0 ng/mL, respectively. The intra-day and inter-day precision of the method were 0.5-1.4 % and 0.7-1.8 % in relative standard deviation, respectively, while those accuracy were 99.5-100.9 % and 100.0-102.2 %, respectively. The repeatability of oleanolic acid in samples ranged of 0.3-1.9 % based on peak area and 0.3-0.7 % for retention time. Recoveries from samples were 95.0-99.4 % with lower than 1.8 % in relative standard deviation. Overall, the developed analytical method will be used for quality control of this commercial scalp tonic products successfully.

• Asian Pacific Journal of Cancer Prevention
• /
• 제16권13호
• /
• pp.5493-5498
• /
• 2015

Due to the lack of nationwide population-based cancer registration, the total cancer prevalence in Iran is unknown. Our previous work in which we used a basic network scale-up (NSU) method, failed to provide plausible estimates of total cancer prevalence in Kerman. The aim of the present study was to estimate total and partial prevalence of cancer in southeastern Iran using an adapted version of the generalized network scale-up method. A survey was conducted in 2014 using multi-stage cluster sampling. A total of 1995 face-to-face gender-matched interviews were performed based on an adapted version of the NSU questionnaire. Interviewees were asked about their family cancer history. Total and partial prevalence were estimated using a generalized NSU estimator. The Monte Carlo method was adopted for the estimation of upper/lower bounds of the uncertainty range of point estimates. One-yr, 2-3 yr, and 4-5 yr prevalence (per 100,000 people) was respectively estimated at 78 (95%CI, 66, 90), 128 (95%CI, 118, 147), and 59 (95%CI, 49, 70) for women, and 48 (95%CI, 38, 58), 78 (95%CI, 66, 91), and 42 (95%CI, 32, 52) for men. The 5-yr prevalence of all cancers was estimated at 0.18 percent for men, and 0.27 percent for women. This study showed that the generalized familial network scale-up method is capable of estimating cancer prevalence, with acceptable precision.

• 한국유체기계학회 논문집
• /
• 제17권5호
• /
• pp.67-71
• /
• 2014

Recently, the cross flow turbine attracts more and more attention for its good performance over a large operating regime at off design point. This study adopts a very low head cross flow turbine that has barely been studied before, and investigates the effect of air layer on the performance of the cross flow turbine. As open duct is applied in this study and free surface model is used between the air layer and water, an engineering definition of efficiency, instead of traditional definition of efficiency, is used. As torque at the runner fluctuates up and down at a reasonable limit, statistical method is used. Pressure and water volume fraction contours are shown to present the characteristics of air-water flow. With constant air suction in the runner chamber, the water level gradually drops below the runner and efficiency of the turbine can be raised by 10 percent. All considered, the effect of air layer on the performance of turbine is considerable.