• Applied Chemistry for Engineering
• /
• v.21 no.3
• /
• pp.317-322
• /
• 2010

In this study, poly(methyl methacrylate) (PMMA) was treated with changing mixing ratios of $F_2$ and $O_2$ using oxyfluorination method for hydrophilic modification of PMMA film. For the characterizations of oxyfluorinated PMMA surface, contact angle, surface free energy, X-ray photoelectron spectroscopy (XPS) and optical transmittance (UV-vis) were carried out. After the oxyfluorination, PMMA surface became more hydrophilic showing the decrease of water contact angle from $69^{\circ}$ to $44^{\circ}$. So, surface free energy of oxyfluorinated PMMA film was increased from 46 to $58\;mN\;m^{-1}$. These results are attributed to hydrophilic functional groups such as hydroxyl group formed oxyfluorination method on the PMMA surface. From XPS results, it was confirmed that O/C concentration ratio on the surface of PMMA was increased, the amount of C-OH bonding which shows hydrophilicity was also largely increased from 6.7 to 24.8% with increasing fluorine partial-pressure via the oxyfluorination, The oxyfluorination conditions, room temperature, 1 bar with one mixture ratio of $F_2$ to $O_2$ had little influence on optical transmittance properties of PMMA film but enhanced its surface hydrophilicity. This result suggests that oxyfluorination method could be useful to change hydrophobic PMMA surface to hydrophilic.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.75-75
• /
• 2018

Commercially pure titanium (CP-Ti) and Ti-6Al-4V alloys have been widely used in implant materials such as dental and orthopedic implants due to their corrosion resistance, biocompatibility, and good mechanical properties. However, surface modification of titanium and titanium alloys is necessary to improve osseointegration between implant surface and bone. Especially, when titanium oxide nanotubes are formed on the surface of titanium alloy, cell adhesion is greatly improved. In addition, plasma electrolytic oxide (PEO) coatings have a good safety for osseointegration and can easily and quickly form coatings of uniform thickness with various pore sizes. Recently, the effects of bone element such as magnesium, zinc, strontium, silicon, and manganese for bone regeneration are researching in dental implant field. The purpose of this study was researched on the surface morphology of PEO-treated Ti-6Al-4V alloy after anodic titanium oxide treatmentusing various instruments. Ti-6Al-4V ELI disks were used as specimens for nanotube formation and PEO-treatment. The solution for the nanotube formation experiment was 1 M $H_3PO_4$ + 0.8 wt. % NaF electrolyte was used. The applied potential was 30V for 1 hours. The PEO treatment was performed after removing the nanotubes by ultrasonics for 10 minutes. The PEO treatment after removal of the nanotubes was carried out in the $Ca(CH_3)_2{\cdot}H_2O+(CH_3COO)_2Mg{\cdot}4H_2O+Mn(CH_3COO)_2{\cdot}4H_2O+Zn(CH_3CO_2)_2Zn{\cdot}2H_2O+Sr(CH_2COO)_2{\cdot}0.5H_2O+C_3H_7CaO_6P$ and $Na_2SiO_3{\cdot}9H_2O$ electrolytes. And the PEO-treatment time and potential were 3 minutes at 280V. The morphology changes of the coatings on Ti-6Al-4V alloy surface were observed using FE-SEM, EDS, XRD, AFM, and scratch tester. The morphology of PEO-treated surface in 5 ion coating solution after nanotube removal showed formation or nano-sized mesh and micro-sized pores.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.5
• /
• pp.600-607
• /
• 1995

Orostachys japonicus, called Wasong and used as anti-tumor medicinal plant, was cultivated in plastic house. The experiment was done to clarify the effect of long-day and night-break treatment at the timing of bolting on its morphological characters, organ dry weight and flowering of florets. After grown in 15cm plastic boxes containing 2:1 soil:peat moss mixture for about 4 months, long-day of 16 hours and night-break of 2 hours around midnight were treated from Sept. 9. The plants were sampled 5 times at 2-week interval after the treatments. Long-day and night-break treatment delayed the growth of inflorescence and showed greater stem diameter on the last sampling and no. of leaves and bracts than the natural daylength. The treatments also had greater leaf and bract dry weight since 2 weeks, and the other fraction and total dry weights since 4 weeks but less floret dry weight from 4 to 6 weeks after the treatments than the natural daylength. The treatments, however, decreased no. of flowered florets and ratio of flowering plants although all the treatments showed nearly the same no. of total florets per plant until 6 weeks after the treatments, late October, which resulted in the modification of source to sink or vice versa. In the natural daylength, the florets were functioned as sink, while root, leaf and bract as source, but in the long-day and night-break treatments stem and florets were done as sink.

• Korean Journal of Environmental Agriculture
• /
• v.16 no.3
• /
• pp.239-244
• /
• 1997

To develope more effective extraction methods for paraquat in soil, some modification methods were accomplished in two different types of soil. For extraction of tightly bound-paraquat, conc. HCl 70ml were added with different shaking times, and then $H_2SO_4$ reflux were performed for an hour. In this case, 60 minutes shaking were optimum and recovery were increased more $1.09{\sim}1.50$ folds(84.0% in high clay contents soil, but 96.7% in low clay contents soil) and the long-time consuming step, filtration were easily done, with decreasing filtration time were shorter 4.6 folds(ca. $11{\sim}14min.$). than general paraquat analytical method(ca. $55{\sim}65min.$). And only $H_2O_2$ digestion with different volume and refluxing time resulted in recovery increasing. Nevertheless, considering analyst's safety, 30ml of $H_2O_2$ addition and 30 minutes reflux were regarded as optimum condition. Although, Kjeldahl digestion with $H_2O_2$ showed relatively high recovery, it is not significant statistically. For extraction of loosely bound-paraquat, 0.01, 0.1, 1.0, 10.0M of $NH_4Cl$ and of $CaCl_2$ compared with $1.5{\sim}24hr$ of different shaking time. There were no loosely bound residues of paraquat.

• Fibers and Polymers
• /
• v.6 no.1
• /
• pp.19-27
• /
• 2005

High-speed melt spinning of syndiotactic polystyrene was carried out using high and low molecular weight poly­mers, HM s-PS and LM s-PS, at the throughput rates of 3 and 6 g/min. The effect of take-up velocity on the structure and properties of as-spun fibers was investigated. Wide angle X-ray diffraction (WAXD) patterns of the as-spun fibers revealed that the orientation-induced crystallization started to occur at the take-up velocities of 2-3 km/min. The crystal modification was a-form. Birefringence of as-spun fibers showed negative value, and the absolute value of birefringence increased with an increase in the take-up velocity. The cold crystallization temperature analyzed through the differential scanning calorimetry (OSC) decreased with an increase in the take-up velocity in the low speed region, whereas as the melting temperature increased after the on-set of orientation-induced crystallization. It was found that the fiber structure development proceeded from lower take-up velocities when the spinning conditions of higher molecular weight and lower throughput rate were adopted. The highest tensile modulus of 6.5 GPa was obtained for the fibers prepared at the spinning conditions of LM s-PS, 6 g/min and 5 km/min, whereas the highest tensile strength of 160 MPa was obtained for the HM s-PS fibers at the take-up velocity of 2 km/min. Elongation at break of as-spun fibers showed an abrupt increase, which was regarded as the brittle-duc­tile transition, in the low speed region, and subsequently decreased with an increase in the take-up velocity. There was a uni­versal relation between the thermal and mechanical properties of as-spun fibers and the birefringence of as-spun fibers when the fibers were still amorphous. The orientation-induced crystallization was found to start when the birefringence reached -0.02. After the starting of the orientation-induced crystallization, thermal and mechanical properties of as-spun fibers with similar level of birefringence varied significantly depending on the processing conditions.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.3
• /
• pp.75-83
• /
• 2004

The Indiana Department of Transportation (INDOT) has permitted the use of Lime Kiln Dust (LKD) as a low-cost construction material in creating a workable platform for soil modification (not for soil stabilization) since the early 1990s on selected projects. However, the enhanced strength of soils with LKD has not been accounted for in the subgrade stability calculations in the design process. This study was initiated to evaluate how the lime kiln dust is a comparable material to hydrated lime. A series of laboratory tests were performed to assess the mechanical benefits of lime kiln dust in combination with various predominant fine grained soils encountered in the State of Indiana, such as A-4, A-6 and A-7-6. In the course of this study, several tests such as the Atterberg limits, standard Proctor, unconfined compression, CBR, volume stability, and resilient modulus were performed. As a result, mixtures of fine grained soils with 5% lime or 5% LKD substantially improve unconfined compressive strength up to 60% - 400%. CBR values for treated soils are in the range of 25 to 70 while those for untreated soils range from 3 to 18. In general, significant increase in resilient moduli of the soils treated with lime and LKD was observed. This indicates that lime kiln dust may be a viable, cost effective alternative to hydrated lime in enhancing the strength of fine grained soils.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.7 no.2
• /
• pp.264-274
• /
• 2001

About the patients who visited the emergency department of a hospital, investigative study was performed to assess and to classify them with triage tool, and to estimate the characteristics of them. 210 patients older than 15 years were investigated. Among them 11 patients who had responded inappropriately were excluded and remaining 210 patients were chosen as study subjects. Investigation had been performed for 30 days from Jan. 10, 2001 to Feb. 9, 2001. The triage tool was designed through the modification of triage tools developed by Kim and Choi. The data were analyzed with the SPSS program using mean, standard deviation, frequency, percentage, ANOVA and Scheffe's test. The results were as follows: 1. Of the characteristics of the study subjects, mean age of patients were 55.76 years and 70-79 years group which included 41 patients(20.6%) were most numerous. 101 (51.8%) patients visited emergency room by 119 emergency service and 91(45.7%) patients walked with assistance. 127 patients were cared in internal medicine department. 2. The distribution of triage scores were from minimum 6 points to maximum 18 points with mean $13.76{\pm}2.58$ points. 3. Triage scores had significant relationship with age(F=13.349,P=0.000), visiting method (F=8.832, P=0.000), walking status(F=28.185, p=0.000), care department(F=2.596, P=0.019), and preexisting disease(F=12.012, P=0.000). 4. After trage there were no urgent patient, 35 emergent patients(17.6%),109 subemergent patients(54.8%), and 55 nonemergent patients (27.6%). The result of emergency care were 80 admission(40.2%), 59 discharge (29.6%), 34 ICU admission(17.1%), 14 transfer to other hospital(7%), 10 operation (5%), and 2 death (2%). 5. About the time required for triage, mean duration to triage were $7.54{\pm}2.28$ mins in emergent patients, mean $7.23{\pm}2.50$ mins in subemergent patients and mean $6.49{\pm}2.19$ mins in nonemergent patients. There were no differences in duration to triage according to the severity of triage. 6. Time required in emergency treatment were mean $116.23{\pm}88.10$ in emergent patients mean $101.61{\pm}73.27$ in subemergent patients and mean $81.56{\pm}61.01$ in nonemergent patients. There were no significant difference among groups. This study depicted that triage scores were below the middle level and there were many geriatric patients in this hospital. Among the characteristics of patients, age, visiting method, walking status, care department, and accompanying disease could be data for triage of emergency patients. With triage score of a patient, the outcome of emergency care of a patient could be anticipated and this could be basal data in determining the priority of emergency nursing.

• Publications of The Korean Astronomical Society
• /
• v.27 no.5
• /
• pp.419-429
• /
• 2012

In this paper, we propose a new re-quantization method after FFT processing to prevent the distortion of correlation result of VCS (VLBI Correlation Subsystem). The re-quantization is used to rearrange the data bit so as to reduce the data rate processed as 16-bit of FFT result of VCS. Having done this procedure, we found that the distorted spectrum of correlation result occurred in the delay tracking experiments by the re-quantization method introduced for initial design of VCS. In order to solve this, two kinds of re-quantization method, that is, the comparison and selection-type, are proposed. The first is to re-quantize the FFT result as a valid-bit by comparing with the input data after determining the adequate threshold. The second is manually to select the valid-bit of FFT result after finding the valid-field of data according to the bit-distribution of input data. We confirmed that the second is more effective compared with the first through the experimental result, and it will be implemented without so much modification of applied method in the condition of the limited resource of FPGA. The re-quantization is, however, carried out with 4-bit in the proposed second method for FFT result, and then the distortion of correlation result is also appeared. To fix this problem, the bit for re-quantization is extended to 8-bit. The proposed 8-bit selection-type is effectively verified so that the distortion of correlation result disappeared by applying to VCS in consequence of the simulation and correlation experiments.

• Korean Chemical Engineering Research
• /
• v.58 no.1
• /
• pp.52-58
• /
• 2020

Electrochemical characterization and thermal stability were investigated for MgF₂ coated LiNi_0.8Co_0.15Al_0.05O₂ cathode. The ratio of MgF₂ was controlled by 0.5, 1, 3 wt%. Cyclic voltammetry, charge-discharge profiles, rate capability, cycle life were measured for electrochemical properties. DSC analysis was measured for thermal stability. The first discharge capacities of MgF₂ coated LiNi_0.8Co_0.15Al_0.05O₂ were decreased at 0.1C-rate compared to pristine LiNi_0.8Co_0.15Al_0.05O₂. But the rate capability and cycle life of MgF₂ coated LiNi_0.8Co_0.15Al_0.05O₂ were improved at 2C-rate. In DSC analysis result, the exothermic temperature of MgF₂ coated LiNi_0.8Co_0.15Al_0.05O₂ was increased and peak height was decreased.

• Polymer(Korea)
• /
• v.36 no.5
• /
• pp.668-676
• /
• 2012

In this study, we modified silica nanoparticles with bis[3-(trimethoxysilyl)propyl]amine (BTMA) silane coupling agent to introduce secondary amino groups on the silica surface. After modification of silica, we investigated effects of different types of (meth)acrylate group containing monomers on the Michael addition reaction to introduce reactive (meth)acrylate groups on the BTMA modified silica surface. We used two kinds of (meth)acrylate monomers, trimethylolpropane ethoxylate triacrylate (TMPET) which has three identical acrylate groups, and 3-(acryloyloxy)-2-hydroxypropyl methacrylate (AHM) which has one acrylate and one methacrylate group. We used fourier transform infrared spectroscopy (FTIR), elemental analysis (EA) and solid state cross-polarization magic angle spinning (CP/MAS) nuclear magnetic resonance spectroscopy (NMR) to understand reactions between NH groups on the silica surface with (meth)acrylate groups of TMPET and AHM monomers. We found almost complete Michael addition reaction between all three acrylate groups of TMPET with NH groups on the BTMA modified silica. But, for the AHM treatment of BTMA modified silica, we found Michael addition reaction occurred only between acrylate groups of AHM and NH groups of silica surface, not between methacrylate groups of AHM and NH groups of BTMA modified silica surface.