• 대한치과기공학회지
• /
• 제37권4호
• /
• pp.229-234
• /
• 2015

Purpose: The purpose of this study was to analysis the internal fitness of single crown fabricated by additive method technique. Methods: Study models were fabricated. Ten crowns were manufactured by additive method technique (AM group) and another ten crowns using conventional method were manufactured (CM group). The internal fitness of specimens were measured using silicone replica technique. Silicone replicas were sectioned one times (direction: from mesial to distal). The internal fitness were evaluated using by digital microscope. Statistical analyses were performed with independent samples t-test. (${\alpha}=0.05$). Results: Mean(SD) of all internal fitness were $92.1(20.0){\mu}m$ for AM group and $69.7(12.3){\mu}m$ for CM group. Two groups were statistically significant differences (p<0.001). Conclusion: All internal gaps of AM group were ranged within the clinical recommendation ($120{\ss}{\neq}$).

• Asian-Australasian Journal of Animal Sciences
• /
• 제16권3호
• /
• pp.380-383
• /
• 2003

The gas dilution technique was used to evaluate the possibility of estimating the volume of gaseous phase in the rumen from its composition in sheep given rice whole crop silage (RWS) or dent corn silage (DCS) at a level of maintenance (M) or 2 M, and in the course of fasting. The rumen gas composition was determined at 2 and 7.5 h after morning feeding. Nitrogen gas was injected by using an airtight syringe into the rumen immediately after collecting the rumen gas sample as a control. Then rumen gas samples were collected at 5, 10, 20, 40 and 60 min. after injection. Dry-matter intakes were $42g/kg^{0.75}$ and $57g/kg^{0.75}$ for DCS, and $36g/kg^{0.75}$ and $59g/kg^{0.75}$ for RWS, at 1 M and 2 M levels, respectively. Animals ingested both silages about 20% less than expected at 2 M level. The rumen gas composition did not differ significantly between 2 h and 7.5 h after feeding except for $N_2$. Content of $CO_2$ in gas composition was significantly higher at 2 M level than at 1 M (p<0.05) for both RWS and DCS, whereas $CH_4$ showed no significant difference between feeding levels. At both feeding levels, $CO_2$ showed a higher (p<0.05) percentage in DCS than RWS. A dilution technique by using $N_2$ injection is not appropriate for the determination of gas production in vivo, unless the rate of rumen gas turnover is considered. Changes in composition at fasting indicate that the rumen fermentation may reach the lowest level after 72 h fasting for sheep given silage as their sole diet.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집E
• /
• pp.100-106
• /
• 2001

The size distributions of electrospray droplets from the Taylor cone in cone-jet mode are directly measured by using a freezing method and a transmission electron microscope (TEM) image processing technique. These results are compared with the data obtained by an aerodynamic size spectrometer (TSI Aerosizer DSP). The use of glycerol seeded with NaI and a freezing method make it possible to sample droplets with their original sizes preserved. Since pictures of droplets are taken with TEM with very low vapor pressure of the solution, evaporation is suppressed by freezing. For liquid flow rates below 1 nl/sec, the measured droplet diameters by the TEM image processing technique and the aerosizer are in the range of 0.25 to $0.32{\mu}m$ and 0.30 to $0.40{\mu}m$, respectively. Comparing the TEM data with the aerosizer measurements, it has been revealed that the TEM image processing technique can afford more accurate values of droplet size distributions in the submicron range of 0.1 to $0.4{\mu}m$.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권4호
• /
• pp.395-404
• /
• 2016

A 6-bit 3.4 GS/s flash ADC in a 65 nm CMOS process is reported along with the proposed 4x time-domain interpolation technique which allows the reduction of the number of comparators from the conventional $2^N-1$ to $2^{N-2}$ in a N-bit flash ADC. The proposed scheme effectively achieves a 4x interpolation factor with simple SR-latches without extra clocking and calibration hardware overhead in the interpolated stage where only offset between the $2^{N-2}$ comparators needs to be calibrated. The offset in SR-latches is within ${\pm}0.5$ LSB in the reported ADC under a wide range of process, voltage supply, and temperature (PVT). The design considerations of the proposed technique are detailed in this paper. The prototype achieves 3.4 GS/s with 5.4-bit ENOB at Nyquist and consumes 12.6 mW power at 1 V supply, yielding a Walden FoM of 89 fJ/conversion-step.

• 한국의학물리학회지:의학물리
• /
• 제21권2호
• /
• pp.137-144
• /
• 2010

64 multi-detector computed tomography (MDCT)에서 두개부의 과도한 선량이 문제가 되어 고정관류기법과 관전류 자동노출조절(automatic exposure control, AEC) 기법을 이용하여 선량 감소 정도를 비교 평가하고자 한다. 연구에 사용한 장비는 Siemens사의 SOMATOM Definition 64 multi-detector CT를 이용했으며, Whole body phantom (KUPBU-50, Kyoto Kagaku CO. Ltd)의 두개부를 사용했다. 실험 protocol은 helical scan 방식을 적용하여 120 kVp, rotation time은 1 sec, slice thickness와 increment는 각각 5 mm, FOV는 250 mm, matrix size는 $512{\times}512$, collimation은 $64{\times}0.625\;mm$, pitch는 1로 조사하였다. 선량감소효과의 측정방법은 관전류를 350 mAs로 고정한 방법과 AEC 기법을 적용한 방법으로 나누어 평가하였으며, 영상품질은 CT number의 표준편차를 이용하여 영상의 잡음을 측정하였다. 이 때 두개부(craniofacial bone)는 머리덮개뼈(calvaria) 끝부분에서 눈썹활(superciliary ridge)까지를 1구역, 논썹활 아래부터 코가시점(acanthion)까지를 2구역, 그리고 코가시점 아래부터 턱(mentum)끝까지를 3구역으로 정의하여 측정하였다. 고정관류기법에서 구역별로 CTDIvol은 57.7 mGy였으며, DLP는 $640.2\;mGy{\cdot}cm$로 동일하였다. AEC 기법을 적용한 1구역은 CTDIvol: 30.7 mGy, DLP: $340.7\;mGy{\cdot}cm$, 2구역은 CTDIvol: 46.5 mGy, DLP: $515.0\;mGy{\cdot}cm$, 그리고 3구역은 CTDIvol: 30.3 mGy, DLP: $337.0\;mGy{\cdot}cm$으로 나타났다. 영상품질을 나타내는 CT number의 표준편차는 1구역에서 고정 관류기법은 2.6, AEC 기법은 3.0, 2구역에서 고정 관류기법은 3.1, AEC 기법은 3.4, 3구역에서 고정 관류기법은 2.7, AEC 기법은 3.2으로 측정되었다. 64 MDCT에서의 AEC 기법은 기존의 고정관류법에 비해 안구, 이하선 그리고 갑상선 부위에 대해 큰 선량 감소효과가 나타났으며, 두개부의 방사선량을 감소시키는데 매우 유용한 기법으로 사료된다.

• 대한전자공학회논문지SD
• /
• 제44권9호
• /
• pp.71-80
• /
• 2007

본 논문은 교차결합된 부성저항(cross-coupled negative-gm) 발진기 구조의 캐패시터 공통단자에서 2차 고조파를 얻어내는 새로운 푸쉬-푸쉬 기술에 대해 제안한다. 캐패시터 공통단자에서 2차 고조파가 생성되는 기본적인 이론은 에미터-베이스 접합 다이오드의 비선형 특성에 의한 Voltage clipping과 VCO core 트랜지스터의 Switching 동작 시 생기는 상승과 하상 시간의 차로써 설명된다. Simulation을 통한 비교연구를 통하여 본 논문에서 제안한 방법이 기존의 에미터 공통단자에서 출력을 얻어내는 방법보다 마이크로파 영역에서 전력효율이 더 뛰어나다는 것을 보였다. 본 기술을 적용한 Prototype MMIC VCO가 12-GHz와 17-GHz 대역에서 GaInP/GaAs HBT 공정을 사용하여 설계, 제작되었다. 출력 파워는 각각 -4.3dBm과 -5dBm이 측정되었고, Phase noise는 1-MHz offset에서 각각 -108 dBc/Hz와 -110.4 dBc/Hz가 측정되어 -175.8 dBc/Hz와 -184.3 dBc/Hz의 FoM(Figure-of-Merit)을 얻었다. 제작된 12-GHz와 17-GHz의 VCO Core는 각각 25.7mW(10.7mA/2.4V)와 13.1mW(4.4mA/3.0V)를 소모한다.

• 분석과학
• /
• 제8권4호
• /
• pp.663-668
• /
• 1995

Ion transport of a polypyrrole/chloride (PPy/Cl) film and a polypyrrole/poly(styenesulfonate) (PPy/PSS) film as a function of applied dc potential was investigated by employing electrogravimetric impedance technique and electrochemical impedance technique. The cation and anion contribution to the whole charge capacitance and the diffusion coefficients of cation and anion in a PPy/PSS film were calculated by fitting the electrogravimetric impedance data with proposed model circuit. The diffusion coefficients of $Na^+$ in a 1 M $NaClO_4$ solution are over 1 order of magnitude larger than those of $ClO{_4}^-$, and $ClO{_4}^-$ contribution to charge compensation decreases as dc potential lowers. The charge compensation of a PPy/Cl film ir a 1 M CsCl solution is carried out largely by $Cl^-$ at 0.2 V vs. Ag/AgCl and by $Cs^+$ as well as $Cl^-$ at -0.4 V.

• The Journal of the Acoustical Society of Korea
• /
• 제22권4E호
• /
• pp.176-182
• /
• 2003

As the needs for wireless Internet service is increasing, the needs for secure m-commerce is also increasing. Conventional security techniques are reinforced by biometric security technique. This paper utilized the voice as biometric security techniques. We developed speaker verification system for m-commerce (mobile commerce) via wireless internet and wireless application protocol (WAP). We named this system the mVprotek. We implemented the system as client-server architecture. The clients are mobile phone simulator and personal digital assistant (PDA). The verification results are obtained by integrating the mVprotek system with SK Telecom's code dimension multiple access (CDMA) system. Utilizing f-ratio weighting and virtual cohort model normalization showed much better performance than conventional background model normalization technique.

• 한국환경과학회지
• /
• 제23권4호
• /
• pp.715-722
• /
• 2014

Effects of coagulation types on flocculation were investigated by using a photometric dispersion analyzer (PDA) as an on-line monitoring technique in this study. Nakdong River water were used and alum and ferric chloride were used as coagulants. The aim of this study is to compare the coagulation characteristics of alum and ferric chloride by a photometric dispersion analyzer (PDA). Floc growing rates ($R_v$) in three different water temperatures ($4^{\circ}C$, $16^{\circ}C$ and $30^{\circ}C$) and coagulants doses (0.15 mM, 0.20 mM and 0.25 mM as Al, Fe) were measured. The floc growing rate ($R_v$) by alum was 1.8~2.8 times higher than that of ferric chloride during rapid mixing period, however, for 0.15 mM~0.25 mM coagulant doses the floc growing rate ($R_v$) by ferric chloride was 1.1~2.3 times higher than that of alum in the slow mixing period at $16^{\circ}C$ water temperature. Reasonable coagulant doses of alum and ferric chloride for turbidity removal were 0.1 mM (as Al) and 0.2 mM (as Fe), respectively, and the removal efficiency of those coagulant doses showed 94% for alum and 97% for ferric chloride. The appropriate coagulant dose of alum and ferric chloride for removing dissolved organic carbon (DOC) showed about 0.3 mM (as Al, Fe) and at this dosage, DOC removal efficiencies were 36% and 44%, and ferric chloride was superior to the alum for removal of the DOC in water.

• 대한수의학회지
• /
• 제13권1호
• /
• pp.39-46
• /
• 1973

Cultural method, dark field microscopy & fluorescent antibody technique were compared for their sensitivity of the detection of leptospires from experimentally infected mice. Two groups of mice were infected with L. icterohemorrhagiae (M20) and L. australis (Ballico), and the infected blood, urine and a number of organs were subjected to the bacterial isolation. The results obtained were summarized as follows: 1. L. icterohemorrhagiae (M20) and L. australis (Ballico) in blood, urine and various tissues of experimentally infected mice were detected with a negrigible non specificity, by the fluorescent antibody technique. 2. The fluorescent antibody technique, as applied to detection of leptospires in blood, urine and various infected tissue, proved to be better than cultural method and dark-field microscopy. 3. Early detection of leptospires by fluorescent antibody technique were possible in blood at 2 days after inoculation, whereas detection of organisms in liver, spleen, lung and kidney were observed later. By means of fluorescent antibody technique, the detection of leptospires in kidney and urine was possible up to 34 days postinoculation, whereas those in other parts were impossible. 4. Fluorescent antibody reaction of leptospires were highly specific to homologous antigen rather than to heterologous one. 5. Fluorescent antibody technique may be of value in the application for the demonstration of leptospira from clinical specimens.