• Korean Journal of Soil Science and Fertilizer
• /
• v.5 no.2
• /
• pp.75-82
• /
• 1972

The proposed hypothesis that the effects of climatic factors during ripening period (from 10 days before heading to 30 days after heading) on ripened grain ratio are equal on the level of canopy and on the level of tiller in that canopy of rice plant appeared to be agreeable. The followings were found according to the analysis of ripening structure at tiller level. 1. The optimum ripening temperature (mean air temperature during ripening period) was $21^{\circ}C$ for Jinheung and $22^{\circ}C$ for IR667-Suwon 214. 2. The minimum mean solar radiation ($cal\;cm^{-2}\;day^{-1}$) of ripening period was not greater than 240 for Jinheung and greater than 270 for IR 667-Suwon 214. 3. The ripened grain ratio was not different from main culm to first tillers of second order of main culm in Jinheung but greatly decreased from 4th tiller of first order of main culm in IR667 and the number of grain per main culm was greater in IR667 than in Jinheung indicating that yield of IR667 could be increased by increasing the number of main culm. 4. The last heading date insuring optimum ripening period appeared to be 25th in August for Jinheung and 30th in August for IR667 in Suweon.

• Journal of the Korean Society of Radiology
• /
• v.14 no.1
• /
• pp.7-14
• /
• 2020

The purpose of this study is to assess the usefulness of IR to compensate for uncertainties in inserting high density artificial objects in radiation treatment planning in the 3D-CRT treatment technique. CT images of the subjects with phantom and titanium inserted were obtained from images without IR and images with IR, and the dose evaluation factors HI, MU and volume evaluation factors Volume and PCI were compared. The results of the stainless steel and titanium phantom experiments showed that the volume of high density artificial material was reduced by 4.850% and 11.456% respectively when applying IR. MU decreased 0.924% and 1.181%. HI was down 0.106% and 0.272%. PCI decreased 0.358% and 0.867%. When IR was applied to CT images of subjects with vertebroplasty, Femur alignment pin and wrist alignment pin, the volume of artifacts decreased by 47.76%, 23.841%, and 49.339%. MU also decreased 0.924%, 0.294% and 1.675%, while HI decreased 1.232%, 0.412% and 1.695%. PCI decreases 4.022%, 0.512%, and 13.472%. In conclusion, When IR was applied to 3D-CRT treatment plan, both dose and volume in phantom and subject case with high density artificial insert were reduced.

• Korean Journal of Weed Science
• /
• v.16 no.4
• /
• pp.354-361
• /
• 1996

This study was conducted to evaluate the susceptibility of rice(Oryza sativa L.) cultivars to herbicide thiobencarb through the determination of protein patterns using SDS-PAGE. In both greenhouse and laboratory screening tests, IR 10198-66-2 and IR 9660-50-3-1 showed relatively tolerant response to thiobencarb, while IR 22, IR 31802-48-2-2-2 and IR 20656-R-R-R-6-1 were susceptible to it. The total protein content of susceptible cultivars markedly decreased as the thiobencarb concentrations increased, but tolerant cultivars such as IR 10198-66-2 and IR 9660-50-3-1 showed very slight changes suggesting that protein synthesis of susceptible cultivars may be inhibited by thiobencarb. The protein profiles of the tolerant cultivars were not much affected by thiobencarb treatment. However, the protein spots with molecular weights of 14.4 kD and 55 kD in the susceptible cultivar of IR 22 disappeared with the treatment of 3 ppm thiobencarb, indicating that differential susceptibilities of rice cultivars against thiobencarb can be attributed to their difference in protein metabolism affected by thiobencarb.

• Journal of Plant Biotechnology
• /
• v.43 no.3
• /
• pp.317-331
• /
• 2016

Development of disease resistant plant is one of the important objectives in rice breeding programs because biotic stresses can adversely affect rice growth and yield losses. This study was conducted to identify lines with multiple-resistance genes to biotic stress among 173 hybrid rice breeding lines and germplasms using DNA-based markers. Our results showed that one hybrid rice line [IR98161-2-1-1-k1-3 (IR86409-3-1-1-1-1-1/IRBB66)] possessed 5 bacterial blight resistance genes (Xa4, xa5, Xa7, Xa13 and Xa21) while two hybrid rice lines [IR98161-2-1-1-k1-2 (IR86409-3-1-1-1-1-1/IRBB66) and 7292s (IR75589-31-27-8-33S(S1)/IR102758B)] possessed 3 bacterial blight resistance genes (Xa4, Xa7 and Xa21, and Xa3, Xa4 and xa5). Molecular survey on rice blast disease revealed that most of these lines had two different resistant genes. Only 11 lines possessed Pib, Pi-5, and Pi-ta. In addition, we further surveyed the distribution of insect resistant genes, such as Bph1, Bph18(t), and Wbph. Three hybrid breeding lines [IR98161-2-1-1-k1-3 (IR86409-3-1-1-1-1-1/IRBB66), IR98161-2-1-1-k1-2 (IR86409-3-1-1-1-1-1/IRBB66), and 7292s (IR75589-31-27-8-33S(S1) /IR102758B)] contained all three resistance genes. Finally, we obtained four hybrid rice breeding lines and germplasms [IR98161-2-1-1-k1-2 (IR86409-3-1-1-1-1-1/IRBB66), Damm-Noeub Khmau, 7290s, and 7292s (IR75589-31-27-8-33S(S1)/IR102758B)] possessing six-gene combination. They are expected to provide higher level of multiple resistance to biotic stress. This study is important for genotyping hybrid rice with resistance to diverse diseases and pests. Results obtained in this study suggest that identification of pyramided resistance genes is very important for screening hybrid rice breeding lines and germplasms accurately for disease and pest resistance. We will expand their cultivation safely through bioassays against diseases, pests, and disaster in its main export countries.

• Journal of Radiation Protection and Research
• /
• v.32 no.1
• /
• pp.21-26
• /
• 2007

This study is performed to evaluate the dose rate and to analyze the dose distribution of the gamma irradiation facility (IR-221) by using a Monte Calro simulation, which is helpful of upgrading the radiation processing qualification. Monte Cairo simulation is performed by MCNP4B code. Dose rates were measured at total 369 points with alanine dosimeters to compare the calculation results and the measurements data. The results have shown that the MCNP4B code is very useful to determine the dose distribution of the IR-221 gamma irradiation facility, as the calculation dose rate is within about ${\pm}5%$ of the measurement data. Dosimetry about the gamma irradiation facility usually needs enormous manpower and time. However Monte Cairo calculation method can reduce the tedious dosimetry jobs and improve the irradiation processing qualification, which will probably contribute to obtain the reliability of the irradiation products.

• Journal of the Korean Ceramic Society
• /
• v.25 no.1
• /
• pp.1-6
• /
• 1988

The IR edge absorption of the important pure components of ZrF4-based glasses, including two previously uncharacterized components(ZrF4 and AlF3), has been measured. Values of the glass IR edge absorption coefficients have been calculated from these results, assuming additivity, and are compared with experimental glass absorption coefficients. The calculated ${\alpha}$ values are about a factor of two lower than the experimental values for ZrF4-based glasses, and the ZrF4 makes the largest contribution to the calculated ${\alpha}$ value.

• Journal of the Korean Chemical Society
• /
• v.48 no.1
• /
• pp.107-110
• /
• 2004

• Journal of Environmental Science International
• /
• v.29 no.10
• /
• pp.943-949
• /
• 2020

In this work, we prepared a heterojunction anode with a surface layer of SnO₂-Sb-Ni (SSN) on a Ti/IrO₂ electrode by thermal decomposition to improve the electrochemical activity of the Ti/IrO₂ electrode. The Ti/IrO₂-SSN electrode showed significantly improved electrochemical activity compared with Ti/IrO₂. For the 0.1 M NaCl and 0.1 M Na₂SO₄ electrolytes, the onset potential of the Ti/IrO₂-SSN electrode shifted in the positive direction by 0.1 V_SCE and 0.4 V_SCE, respectively. In 2.0-2.5 V voltages, the concentration in Ti/IrO₂-SSN was 2.59-214.6 mg/L Cl₂, and Ti/IrO₂ was 0.55-49.21 mg/L Cl₂. Moreover, the generation of the reactive chlorine species and degradation of Eosin-Y increased by 3.79-7.60 times and 1.06-2.15 times compared with that of Ti/IrO₂. Among these voltages, the generation of the reactive chlorine species and degradation of Eosin-Y were the most improved at 2.25 V. Accordingly, in the Ti/IrO₂-SSN electrode, it can be assumed that the competitive reaction between chlorine ion oxidation and water oxidation is minimized at an applied voltage of 2.25V.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.37 no.4
• /
• pp.361-371
• /
• 1992

For the increase of grain yield potential in rice, a low-tillering large panicled type has been suggested as an ideotype. A low-tillering plant type may have different yield potential and needs different cultural practices from that used in a high-tillering type for the maximum yield. This study was conducted to evaluate the grain yield performances of a low-tillering large panicled rice and high-tillering small panicled rice at different plant spacings, nitrogen(N) levels and seedling numbers per hill. A low-tillering large panicled genotype, IR25588 was compared with a high-tillering small panicled IR58. The grain yield of IR25588 was significantly higher than that of IR58 under a narrow spacing with high N level. The maximum yields of IR58 and IR25588 were reached at about 35,000 and 40,000 spikelets per m$^2$, respectively. The increased grain yield in IR25588 was mainly due to the increase in spikelet number per unit area which is the most precise indicator of grain yield in rice. The optimum spacing for the maximum yield was denser for IR25588 than that for IR58 under high N level. The intra-hill competition of the low-tillering type was lower than that of the high-tillering type. The higher dry matter production and bigger leaf area and culm weight were the main factors for increased grain yield in a low-tillering panicle weight type. Based on the results, the yield potential of a low-tillering panicle weight type was higher than that of a high-tillering panicle number type, especially under a close spacing with high N level.

• The tire
• /
• s.61
• /
• pp.16-19
• /
• 1975

무우니이점도 30에서 70까지의 천연고무(이하 NR이라고 약)와 합성 시스-1,4-포리이소프렌(이하 IR이라고 약)의 완화탄성률에 대해서 검토했다. 완화탄성률은 -50℃로부터 90℃이며 시간 3초로부터 3,000초에 긍해서 측정했다. 동일한 무우니이점도로서 어느 온도에 있어서도 IR의 완화탄성률은 NR에 비하면 작으며 따라서 IR은 부드럽게 촉감된다고 생각된다. NR과 IR의 각종온도에서의 완화탄성률과 시간의 관계는 같은 환산계수를 사용해서 중합이 가능했었다. 얻어진 합성곡선에 대해서 특히 종단역에 있어서 NR의 완화탄성률이 IR에 비해서 크다. 이것은 같은 무우니이점도로서 NR쪽이 IR에 비하여 높은 평균분자량과 넓은 분자량분포를 가지기 때문이라고 생각된다.