• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.4
• /
• pp.449-456
• /
• 2012

Herein, we design a wideband $8{\times}8$ waveguide Butler matrix in order to use in a multi-port amplifiers(MPAs) at Ka-band. To achieve the broadband characteristic, we design a binomial 6-slot 3 dB directional coupler which is used to configure the $8{\times}8$ Butler matrix. The measured results of the fabricated $8{\times}8$ Butler matrix have low insertion loss of less than 0.3 dB, good return loss of over 26 dB and high isolation of over 35 dB within the design bandwidth of 3 GHz.

• YAKHAK HOEJI
• /
• v.52 no.6
• /
• pp.488-493
• /
• 2008

2-Aminothiazole ring as a bioisoster of catechol in dopamine has provided with good oral availability and lipophilic property. 2-Aminoindan, is a rigid form of dopamine, was evaluated as a dopamine D3 agonist with low neurotoxicity. Dopamine D3 agonist was evaluated as selective for the treatment of Parkinson's disease. In order to develop a novel dopamine D3 agonist, we tried to synthesize the aminothiazoloindenoxazine derivative that is a hybrid structure of aminoindenoxazine and thiazole ring. cis-2-Amino-1-indanol (2) was synthesized from 1,2-indandione-2-oxime by catalytic hydrogenation and it was treated with chloroacetyl chloride and NaH in benzene solution to give (${\pm}$)-cis-4,4a,5,9b-tetrahydroindeno[1,2-b][1,4]oxazin-3(2H)-one (6). Nitration of 6 by the mixed acid gave 8-nitro compound (7) and the carbonyl group of 7 was reduced with $LiAlH_4$ to afford compound (8). 8 was reduced to form (${\pm}$)-cis-8-amino-2,3,4,4a,5,9b-hexahydroindeno[1,2-b][1,4]oxazine (9) and finally it was cyclized with KSCN in glacial acetic acid to yield (${\pm}$)-cis-8-amino-2,3,4,4a,5,10b-hexahydrothiazolo[4,5-f]indeno[1,2-b][1,4]oxazine (10).

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.5
• /
• pp.123-127
• /
• 2017

This paper fabricated and analyzed the image rejection mixer that uses FET's channel resistance. It can be applied for capacity 64QAM that has 50MHz~90MHz of IF band, 8.17GHz of LO frequency and 8.08~8.12GHz of RF band. When IF input power is -20dBm and LO input power is 10dBm, RF output power is obtained -33.2dBm. In this case, conversion loss is 12.9dB, the suppression of 14.3dB for LO frequency and 10.4dB for image frequency. The result of two tone test shows great IMD characteristics with 51.7dBc.

• ETRI Journal
• /
• v.42 no.6
• /
• pp.943-950
• /
• 2020

We propose 8.2-GHz band radar RFICs for an 8 × 8 phased-array frequency-modulated continuous-wave receiver developed using 65-nm CMOS technology. This receiver panel is constructed using a multichip solution comprising fabricated 2 × 2 low-noise amplifier phase-shifter (LNA-PS) chips and a 4ch RX front-end chip. The LNA-PS chip has a novel phase-shifter circuit for low-voltage operation, novel active single-to-differential/differential-to-single circuits, and a current-mode combiner to utilize a small area. The LNA-PS chip shows a power gain range of 5 dB to 20 dB per channel with gain control and a single-channel NF of 6.4 dB at maximum gain. The measured result of the chip shows 6-bit phase states with a 0.35° RMS phase error. The input P1 dB of the chip is approximately -27.5 dBm at high gain and is enough to cover the highest input power from the TX-to-RX leakage in the radar system. The gain range of the 4ch RX front-end chip is 9 dB to 30 dB per channel. The LNA-PS chip consumes 82 mA, and the 4ch RX front-end chip consumes 97 mA from a 1.2 V supply voltage. The chip sizes of the 2 × 2 LNA-PS and the 4ch RX front end are 2.39 mm × 1.3 mm and 2.42 mm × 1.62 mm, respectively.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.6 no.1 s.12
• /
• pp.38-46
• /
• 2007

In this paper an X-band low phase noise HBT oscillator using a planar type MMIC resonator is designed. The chip area of the proposed resonator shows a quarter of the conventional hair-pin resonator using distributed transmission lines. The measurement results show oscillation frequency of 8.295 GHz, the power output of 4.8 dBm, and phase noise characteristic of -106.8 dBc/Hz and -121.7 dBc/Hz at 100 kHz and 1 MHz offset frequencies respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.12C
• /
• pp.759-763
• /
• 2011

In this paper, a dual-band T-shaped microstrip monopole antenna with a pair of slits for 2.4/5.2/5.8-GHz wireless local area networks (WLANs) is proposed. A pair of T-shaped slits is loaded on a T-shaped monopole antenna fed by microstrip line in order to obtain dual-band operation as well as to reduce the antenna size. It is demonstrated from experimental results that the proposed antenna can cover all the required bands for WLAN. The measured impedance bandwidth for VSWR<2 is about 5.7% (2.37-2.51GHz) in the lower frequency band and about 28.8% (4.76-6.35GHz) in the higher frequency band. The measured peak gains are about 1.33 dBi to 1.66 dBi in the 2.4GHz band, 3.50 dBi to 3.95 dBi in the 5.25GHz band, and 2.06 dBi to 2.34 dBi in the 5.8GHz band.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.4 s.119
• /
• pp.408-415
• /
• 2007

A switched-gain controlled LNA is designed and implemented in 0.18 um CMOS technology for $3.1{\sim}4.8\;GHz$ UWB system. In high gain mode, measurement shows a power gain of 12.5 dB, an input IP3 of 0 dBm, while consuming only 8.13 mA of current. In low gain mode, measurement shows a power gain of -8.7 dB, an input IP3 of 9.1 dBm, while consuming only 0 mA of current.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.58 no.2
• /
• pp.85-90
• /
• 2013

This study was conducted to examine the basis for the information to select the suitable potato varieties grown in new reclaimed land. The potatoes of five varieties were planted in the port with 4 different electrical conductivities of saturated extracts of soil taken the Saemangeum reclamation area, which was made of non-treatment salt and three concentrations of salt treatment, 1.6 dS $m^{-1}$, 3.2 dS $m^{-1}$, 4.8 dS $m^{-1}$, respectively. All of the potato varieties were uniformly emerged without missing plant in all treatment groups, even 4.8 dS $m^{-1}$ treatment group. According to the salt concentration of soil, required date to the emergence of the potato comparing to non-treatment salt was delayed 3-4 days in 1.6 dS $m^{-1}$, 6-10 days in 3.2 dS $m^{-1}$, 7-13 days in 4.8 dS $m^{-1}$, respectively, and the number of its branch decreased by 14-58% comparing to non-treatment salt depending on varieties. Since the increase of the salt concentration of the soil was more serious the decrease of the number of its branch, but plant height tended to increase when branch number per plant was small, which was depending on more number of its branch than salt concentration. Fresh tuber yield of potato comparing to non-treatment salt were decrease 33.7% in 1.6 dS $m^{-1}$, 59.5% in 3.2 dS $m^{-1}$, 79.3% 7-13 days in 4.8 dS $m^{-1}$, respectively. The threshold EC starting the growth inhibition of fresh weight decreased was 1.2 dS $m^{-1}$ for Chudong, 1.8 $m^{-1}$ for Chubeak, 1.9 $m^{-1}$ for Chugang and Chuyeong, and 2.0 $m^{-1}$ for Sumi, and EC which decreased 50% of dry weight index was 2.4 dS $m^{-1}$ for Chubaek, 2.45 dS $m^{-1}$ for Chudong, 2.81 dS $m^{-1}$ for Chugang, 3.03 dS $m^{-1}$ for Chuyeong, and 3.29 dS $m^{-1}$ for Sumi. The present results suggest that Sumi is considered to the suitable potato variety grown on saline soils.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.8
• /
• pp.34-42
• /
• 2001

The 1${\times}$2, 1${\times}$4 and 1${\times}$8 multimode interference(MMI) optical power splitters are fabricated by using $Ag^+-Na^+$ ion exchange on BK7 glass. Before fabricating the MMI optical power splitters, we find the refractive index of the channel waveguide and calculate the multimode section length and width. The multimode section lengths and widths are 887${\mu}m$, 1666${\mu}m$ and 1834${\mu}m$ and 40${\mu}m$, 80${\mu}m$ and 120${\mu}m$ for 1${\times}$2, 1${\times}$4 and 1${\times}$8 MMI optical power splitters respectively. The measured properties of the fabricated MMI optical power splitters show that the unbalance ratios of the 1${\times}$2, 1${\times}$4 and 1${\times}$8 MMI optical power splitters are 1.4[dB], 1.7[dB] and 2.0[dB] and the excess losses of those sre 0.96[dB], 2.26[dB] and 1.67[dB]. respectively.

• Journal of the Korean Home Economics Association
• /
• v.28 no.4
• /
• pp.1.1-13
• /
• 1990

Authors have performed the sensory evaluation tests according to each given items after selecting various lines in order to assess the visual effects by the lines in cloth designing. The evaluations were done by means of ranking tests followed by paired comparison tests. The results obtained were as follows : 1. In the item in than "Shoulder width looks wide", the design C3 showed the best visual effect, and then B1, F8, and A5 comes in order. In "Shoulder width looks narrow", they were A2, F5, F7, and B2 in order. 2. In "Bust looks big", the effect was best in F9, and then B1, F5, C3, and A5 and order. "Bust looks small" item showed A3, C1, and F1 in order. 3. In "Waist looks thick", they were B2, D1, and F7 while in "Waist looks thin", they were B3, F8, and D6 in order. 4. In the item in that "Hip looks big", the best effect was in F9, and then E3, C2, and B4 in order. In "Hip looks small", the best one was C1, and then comes. E1, F6, and F8. 5. In "Upper body looks thick", they were D2, D4, F8, C3 and A5 in order whild in "Upper body looks thin", they were A1, F5, and D7 in order. 6. In the item "Lower body lookds thick", they were F9, C2, E3, B3, and D3 in order. In "Lower body looks thin", the best one was C1, and then D1, E2, F6, and F8 comes in order. 7. In "whole body looks thick", they were F9, F3, D3, and A5, and in "Whole body looks thin", they were F5, A1, C1, and D6 in order. 8. In "Height looks tall", the effects were in order of A4, D6, E1, and F7 while in "Height looks short", they were E3, F9, B4, D2, and D1. 8. In "Height looks tall", the effects were in order of A4, D6, E1, and F7 while in "Height looks short", they were E3, F9, B4, D2, and D1. F9, B4, D2, and D1.