• ETRI Journal
• /
• v.28 no.5
• /
• pp.583-592
• /
• 2006

Digital broadcasting technology has developed focusing on multi-channel/multi-media, high-definition quality, and mobility-support. Recently, there has been a clear trend toward bidirectional service with the convergence between broadcasting and communication. The broadcasting viewer is no longer simply a passive receptor but has also become an information generator. Currently, the digital multimedia broadcasting (DMB) specifications are the major standard for portable digital broadcasting and have been establishing the overall guidelines for bidirectional service using the MPEG-4 system. While detailed specifications for DMB systems are not well-established for bidirectional service yet, they share the basic concepts underlying the European Eureka-147 Digital Audio Broadcasting (DAB) system. This paper develops key scenarios for bidirectional service in DMB, describes the signal transaction of broadcasting and return channels, and demonstrates typical scenarios using binary format for scenes (BIFS) in the MPEG-4 system.

• Smart Media Journal
• /
• v.4 no.2
• /
• pp.55-61
• /
• 2015

A bandwidth-enhanced ultra-wide band (UWB) CMOS balun-LNA is implemented as a part of a software defined radio (SDR) receiver which supports multi-band and multi-standard. The proposed balun-LNA is composed of a single-to-differential converter, a differential-to-single voltage summer with inductive shunt peaking, a negative feedback network, and a differential output buffer with composite common-drain (CD) and common-source (CS) amplifiers. By feeding the single-ended output of the voltage summer to the input of the LNA through a feedback network, a wideband balun-LNA exploiting negative feedback is implemented. By adopting a source follower-based inductive shunt peaking, the proposed balun-LNA achieves a wider gain bandwidth. Two LNA design examples are presented to demonstrate the usefulness of the proposed approach. The LNA I adopts the CS amplifier with a common gate common source (CGCS) balun load as the S-to-D converter for high gain and low noise figure (NF) and the LNA II uses the differential amplifier with the ac-grounded second input terminal as the S-to-D converter for high second-order input-referred intercept point (IIP2). The 3 dB gain bandwidth of the proposed balun-LNA (LNA I) is above 5 GHz and the NF is below 4 dB from 100 MHz to 5 GHz. An average power gain of 18 dB and an IIP3 of -8 ~ -2 dBm are obtained. In simulation, IIP2 of the LNA II is at least 5 dB higher than that of the LNA I with same power consumption.

• Journal of Korean Society of Water and Wastewater
• /
• v.24 no.4
• /
• pp.433-442
• /
• 2010

BER at different packing ratios of bio-ring media(BRM) was tested to investigate the effect of varying hydraulic retention time (HRT) and current density on the nitrate removal and current efficiency. In the preliminary batch mode experiment of BERs, current density was applied at 2.0 A/$m^2$, 4.0 A/$m^2$, 4.8 A/$m^2$, which correspond to the designation of reactor #1, #2, #3, respectively. The reactor #2 showed a highest nitrate removal rate of 162.0 mg $NO_3{^-}$-N/L/d, and the kinetics of nitrate removal rate was defined as the Zero order reaction. In the primary experiment of BERs, four BERs packed with BRM were operated in varying HRT and current, and the packing ratios of reactor #1, #2, #3 and #4 were 0%, 8%, 16%, 24%. respectively. This results of the experiments indicated that the nitrate removal rate and current efficiency were increased significantly cause of growing of autotrophic denitrification microorganisms on the surface of cathode and media by increasing of the current density and decreasing of HRT. However, The decreasing of nitrate removal rate and current efficiencies were observed in the condition of HRT of 5.25 hr and 4.8 A/$m^2$ of current density. With more increasing current density and decreasing of HRT, the hydrogen inhibition occurred at the surface of cathode. Moreover, nitrate removal rate by autotrophic denitrification microorganisms attached on the media surface was observed to be limited by no longer increasing dissolved hydrogen concentration of each reactor. In conclusion, the highest nitrate nitrogen removal and current efficiency could be achieved when the BER was operated at the conditions of 7 hr HRT, current density of 4.0 A/$m^2$, and 16% packing ratio. And it was found that the amount of nitrate removal by microorganisms attached on the surface of cathode and media (BRM) was 178.2 mg/L and 52.2 mg/L respectively. and the amount of nitrate removal per MLVSS was 0.435 g $NO_3{^-}$-N/g $MLVSS{\cdot}d$ and 0.336 $NO_3{^-}$-N/g $MLVSS{\cdot}d$.

• Journal of Korean Academy of Oral Health
• /
• v.41 no.4
• /
• pp.290-295
• /
• 2017

Objectives: Dental plaque emits red fluorescence under a visible blue light near the ultra-violet end of the light spectrum. The fluorescence characteristics of each microorganism have been reported in several studies. The aim of this study was to evaluate changes in red fluorescence of oral microorganisms that is affected by blood in the culture media. Methods: The gram-positive Actinomyces naeslundii (AN, KCTC 5525) and Lactobacillus casei (LC, KCTC 3109) and gram negative Prevotella intermedia (PI, KCTC 3692) that are known to emit red fluorescence were used in this study. Each bacterium was activated in broth and cultivated in different agar media at $37^{\circ}C$ for 7 days. Tryptic soy agar with hemin and vitamin $K_3$ (TSA), TSA with sheep blood (TSAB), basal medium mucin (BMM) medium, and BMM with sheep blood (BMMB) were used in this study. Fluorescence due to bacterial growth was observed under 405-nm wavelength blue light using the quantitative light-induced fluorescence-digital (QLF-D) device. The red, green, and blue fluorescence values of colonies were obtained using image-analysis software and the red to green ratio (R/G value) and red to total RGB ratio (R/RGB value) were calculated for quantitative comparison. Results: The QLF-D images of the AN, LC, and PI colonies showed red fluorescence in all media, but the fluorescence of all bacteria was reduced in TSA and BMM media, compared with in TSAB and BMMB media. Both the R/G and the R/RGB values of all bacteria were significantly reduced in growth media without blood (P<0.001). Conclusions: Based on this in vitro study, it can be concluded that red fluorescence of oral bacteria can be affected by growth components, especially blood. Blood-containing medium could be a significant factor influencing red fluorescence of oral bacteria. It can be further hypothesized that bleeding in the oral cavity can increase the red fluorescence of dental plaque.

• Journal of the Korean Chemical Society
• /
• v.52 no.1
• /
• pp.47-51
• /
• 2008

A simple synthetic strategy is described for one-pot synthesis of 5,7-diaryl-4,4-dimethyl-4,5,6,7-tetrahydropyridino[3,4-d]-1,2,3-selenadiazoles (11-15) in the presence of NaHSO4.SiO2 as a heterogeneous catalyst in dry media under microwave irradiation.Key words: One-pot synthesis, 3,3-Dimethyl-2,6-diarylpiperidin-4-one; 1,2,3-Selenadiazoles; Selenium dioxide; NaHSO4.SiO2 Heterogeneous catalyst.

• ETRI Journal
• /
• v.39 no.4
• /
• pp.535-545
• /
• 2017

This paper presents a novel K-band (18 GHz) 16-quadrature amplitude modulation (16-QAM) orthogonal frequency-division multiplexing (OFDM)-based $2{\times}2$ line-of-sight multi-input multi-output communication system. The system can deliver 356 Mbps on a 56 MHz channel. Alignment mismatches, such as amplitude and/or phase mismatches, between the transmitter and receiver antennas were examined through hardware experiments. Hardware experimental results revealed that amplitude mismatch is related to antenna size, antenna beam width, and link distance. The proposed system employs an alignment mismatch compensation method. The open-loop architecture of the proposed compensation method is simple and enables facile construction of communication systems. In a digital modem, 16-QAM OFDM with a 512-point fast Fourier transform and (255, 239) Reed-Solomon forward error correction codecs is used. Experimental results show that a bit error rate of $10^{-5}$ is achieved at a signal-to-noise ratio of approximately 18.0 dB.

• Journal of Korean Society on Water Environment
• /
• v.22 no.1
• /
• pp.30-36
• /
• 2006

This study was carried out to evaluate the performance of Modified Ludzsck Etinger (MLE) process with waste oyster shell media in aerobic tank. Influent flow was 36 L/d and the order of reactor was anoxic, aerobic and sedimentation tank and unit hydraulic retention time was 2 hr, 6 hr and 4 hr, respectively. Sludge recycling rate in sedimentation tank and internal recycling rate were 100%. Media fill rate in aerobic tank was 5%, 10% and 17% and fluid MLSS concentration in aerobic tank was 3000~4000 mg/L. Average TCOD removal rate was 91~93%, TBOD 92~96%, SS 95~96% and when media fill rate was 10% or more, in organic compound removal it could satisfy with wastewater discharge standard. Average total nitrogen removal rate was 70~76% and average total phosphorous removal rate was 58~65%. With media fill rate increasing, total phosphorous average removal rate also increased. For it was that released calcium ion from waste oyster shell reacted with soluble phosphorous. From these experiment results, the MLE process using waste oyster shell as media is a practical method for advanced sewage treatment in rural area.

• Korean Journal of Plant Resources
• /
• v.16 no.2
• /
• pp.160-167
• /
• 2003

In order to investigate the effects of developmental stage of embryos and plant growth regulators on mass production of Zantedeschia spp. Southern Light, immature zygotic embryos of Zantedeschia spp. Southern Light were cultured on Murashige and Skoog(1962) basal media or containing 2,4-D, NAA and BA. Globular embryos did not grow on any of the 2,4-D, NAA and BA combinations. The most suitable stage of immature zygotic embryo culture on the induction callus and multiple shoot was at early cotyledonary embryo stage, and at this stage of embryos were germinated up to 87.5%. The whitish watery callus and yellowish compact nodular callus produced on all 2,4-D, NAA and BA media. The best combination for inducing embryogenic callus was 0.5 mgL NAA and 1.0 mg/L BA. Whitish watery calli have been subcultured for more than 8 months and have retained their producing ability, Plant regeneration was only obtained by direct shoot development and yellowish compact nodular calli. Abundant plantlets were regenerated from cotyledonary stage of embryo culture on MS medium supplemented with 0.5 mg/L NAA and 1.0 mg/L BA. Supplementation of the media with 10％ coconut water showed as the best concentration for plant differentiation from direct developed of shoots. The number of regenerated plants from one embryo could be seperated 25-35s plantlets. All yellowish compact callus-derived plantlets were transferred to pots containing a mixture of vermiculite, perlite and sand(1:1;1 v/v) and 100% of divided plantlets were phenotypically normal.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.4
• /
• pp.414-420
• /
• 2018

The digital convergence looking for new ways to engage visitors by superimposing virtual content on projection over the real world captured media contents. This paper propose the Light ID based interactive 3D immersive exhibition things view using HMD AR technology. This approach does not required to add any additional infrastructure to be built-in to enable service and uses the installed Lighting or displays devices in the exhibit area. In this approach, the Light ID can be used as a Location Identifier and communication medium to access the content unlike the QR Tag which supports provide the download information through web interface. This utilize the advantages of camera based optical wireless communication (OWC) to receive the media content on smart device to deliver immersive 3D content visualization using AR. The proposed exhibition method is emulated on GALAXY S8 smart phone and the visual performance is evaluated for Jeonju Hanok Village. The experimental results shows that the proposed method can give immersive 3D view for exhibit things in real-time.

• Korean Journal of Veterinary Research
• /
• v.55 no.1
• /
• pp.9-12
• /
• 2015

Brachyspira (B.) hyodysenteriae is a causative agent of swine dysentery that is responsible for death and economic losses in the pig industry. It is imperative that clinical samples be delivered fresh for accurate diagnosis. The viability and DNA detection of B. hyodysenteriae using lab-made (phosphate buffered saline and modified tryptic soy broth) or commercial transport media (C, D, and E) were compared by culturing and real-time PCR at $4^{\circ}C$ or room temperature (RT), respectively. B. hyodysenteriae grown in D (Anaerobe Systems, USA) and E (Starplex Scientific, Canada) media was viable for 4 days at $4^{\circ}C$ and RT. However, B. hyodysenteriae in A, B, and C (culture swab; BD Biosciences, USA) media were not recovered after 2 days at RT. Ct values for real-time PCR at $4^{\circ}C$ and RT ranged from $27.2{\pm}2.1$ (C) to $29.6{\pm}0.5$ (B), and $28.0{\pm}0.9$ (E) to $30.2{\pm}1.5$ (B), respectively. Considering the field conditions, it is important that transport media is used for specimen isolation and PCR to obtain an accurate diagnosis of swine dysentery.