• 제목/요약/키워드: 4D-Frame

검색결과 524건 처리시간 0.029초

대중교통 지선노선 선정기법에 관한 연구 (A Study on the Feeder Transit Route Choice Technique)

  • 배기목
    • 한국항해항만학회지
    • /
    • 제27권4호
    • /
    • pp.479-484
    • /
    • 2003
  • 지선버스 노선선정의 경우, 전체 네트워크로서의 노선선정 보다는 지하철 역 등의 특정 기ㆍ종점과의 연계차원에서 단일 노선으로 취급하여 노선선정을 행함이 바람직하다. 본 연구에서는 이와 같은 관점 하에 정류장 대기시간, 환승시간 등은 고려하지 않고, 일정 기ㆍ종점을 연결하는 지선노선 선정을 위한 간편 기법을 구축하였다. 검토대상 도로망 한정, 허용노선장에 의한 후보노선의 열거, 노선평가치에 의한 최종 노선의 선정 등의 3가지 단계를 통해 지선기능으로서의 마을버스 노선을 선정하는 기법을 구축하였다.

Dual detector system에서 Brain SPECT의 new reconstruction method의 연구 (The Study of New Reconstruction Method for Brain SPECT on Dual Detector System)

  • 이형진;김수미;이홍재;김진의;김현주
    • 핵의학기술
    • /
    • 제13권1호
    • /
    • pp.57-62
    • /
    • 2009
  • 목적 : 기존의 fan-beam을 이용한 triple detector system에서 parallel collimator를 이용한 dual detector system으로 변화에 있어 acquisition과 processing 부분에서 발생할 수 있는 여러 가지의 변수를 phantom과 volunteer test를 통하여 실험해 보았다. 1 day protocol brain spect를 위하여 parallel collimator에서만 적용되는 OSEM2D와 OSEM3D의 비교 분석을 중점으로 하였고, 모든 연구는 동등한 검사시간으로 fan-beam을 사용하였던 Triple gamma camera보다 parallel을 사용한 dual camera에서 보다 우수한 영상을 구현하고자 하는 목표를 지향하였다. 실험재료 및 방법 : Normal time scan과 short time scan을 실시하였고, collimator 변화에 따른 영상의 변화도 알아보았다. Jaczack performance phantom과 Body IEC phantom을 이용하여 SNR과 contrast를 평가해보았고 Hoffman 3D phantom의 실험을 거쳐 volunteer test를 실시하였다. 결과 : Normal time과 short time의 비교에서는 FLASH3D를 제외한 OSEM2D와 FBP는 분석방법으로 부적합하였다. LEAP는 resolution과 sharpness 등 전체적인 영상의 질이 기존의 fan-beam을 이용한 영상과 유사하였고, LEUHR은 감도의 저하로 1 day protocol을 적용하기 위한 scan time에는 부적합하였다. 재구성법의 비교에서는 Flash-3D를 이용한 결과들이 기존의 FBP와 OSEM-2D보다 월등히 정확함을 정성적으로 확인하였다. 결론 : OSEM3D 재구성법으로 Dual detector system에서의 1 day protocol brain SPECT 시 Fan-beam보다 sensitivity가 떨어지는 parallel collimator의 단점을 보완하면서 영상의 질 또한 de-noising과 scatter correction, resolution recovery 등의 효과를 얻을 수 있으므로 1 day protocol brain SPECT의 검사의 적용에 유용할 것으로 사료된다. 그러나 이러한 half-time method라 제공되는 다양한 프로그램의 임상적용에 대한 광범 위한 연구가 현실적으로 필요하며 향후 계속적인 연구가 기대되는 바이다.

  • PDF

돌돔(Oplegnathus fasciatus) somatolactin cDNA의 분석 (Characterization of Somatolactin cDNA from Rock Bream (Oplegnathus fasciatus))

  • 강현실;여인규;이제희
    • 생명과학회지
    • /
    • 제13권6호
    • /
    • pp.805-813
    • /
    • 2003
  • 돌돔 (Oplegnathus fasciatus) SL을 암호화하는 cDNA clone을 뇌하수체로부터 RT-PCR 방법에 의해 획득하였다. 돌돔 SL cDNA의 길이는 1636 bp로서 24개의 아미노산인 signal peptide와 207개 의 aa으로 구성된 mature protein을 암호화하는 696 bp의 open reading frame을 갖고 있다. 또한, 돌돔 SL 아미노산에는 이황화 결합에 관여하는 7개의 시스테인 잔기 $(Cys^{5},\; Cys^{15},\; Cys^{42},\; Cys^{65},\; Cys^{181},\; Cys^{198}\$$Cys^{206})$와 두 개의 potential N-glycosylation site인 $Asn^{121}$$Asn^{153}$을 확인하였다. 돌돔 SL은 goldfish와 channel catfish를 제외한 다른 경골어류 SL에 아미노산 서열은 61.1∼92.6%, 뉴클레오타이드 서열은 63∼92.6%의 일치를 나타낸다. 아미노산 서열 alingment에서 돌돔 SL은 다른 어류 SL에 공통적인 4개의 conserved domain $(A_{SL},\; B_{SL},\; C_{SL}$$D_{SL})$을 갖고 있음을 확인하였다. 이들중 $A_{SL},\; B_{SL}$,과 $D_{SL}$,은 경골어류 growth hormone과 prolactin에도 잘 보존되어 있었다 재조합 돌돔 SL 단백질을 E. coli에서 생산하기 위해 돌돔 SL cDNA를 발현벡터에 클로닝하여 단백질의 발현을 유도하였다 발현된 단백질은 SDS-PAGE에 의해 분자량 약 27 kDa의 재조합 단백질의 발현을 확인하였다.

H.264 움직임추정에서 고속 2D PE 아키텍처의 메모리대역폭 개선을 위한 4-방향 검색윈도우 (4-way Search Window for Improving The Memory Bandwidth of High-performance 2D PE Architecture in H.264 Motion Estimation)

  • 고병수;공진홍
    • 대한전자공학회논문지SD
    • /
    • 제46권6호
    • /
    • pp.6-15
    • /
    • 2009
  • 본 논문에서는 H.264 움직임추정의 고속처리를 위하여 2D PE 아키텍처의 메모리 대역폭을 개선할 수 있는 새로운 4-방향 검색윈도우를 설계 및 구현하였다. 기존의 2D PE 아키텍처는 메모리 대역폭을 줄이기 위하여 스캔경로 내에서 인접한 검색윈도우간 중복되는 데이터를 재사용하였으나, 본 연구에서는 재사용을 증대시키기 위하여 인접한 스캔경로 간의 검색윈도우에 대해서도 재사용할 수 있는 방법을 제안한다. 이를 위해서 검색윈도우를 하나의 스캔경로 내에서 래스터 및 사행 스캐닝을 수행하는 기존 방식을 개선하여, 인접한 복수 스캔경로를 4방향(상, 하, 좌, 우)으로 스캐닝하면서 이동할 수 있는 검색윈도우를 설계하였다. 기존 검색윈도우가 제한적인 데이터 재사용으로 $7.7{\sim}11$회 정도의 중복적인 검색(redundancy access factor)을 요구하는데 비하여, 제안된 4-방향 검색윈도우는 3.1/1.4회 정도로 중복검색을 감소시킨 성능을 보인다. 이에 따라서 4-방향 검색윈도우는 기존의 1-방향 검색윈도우에 비하여 70%, 4-방향 검색윈도우에 비하여 60%/81%의 메모리 대역폭 개선 효과를 가져을 수 있게 된다. 제안된 4-방향 검색윈도우의 H.264 정수화소 움직임추정 아키텍처는 절대차분 연산을 위한 $16{\times}16$의 2D PE어레이와 인접 스캔경로 간 검색윈도우 데이터를 재사용하기 위한 $5{\times}16$의 RE어레이로 구성되어 있다. 2D PE어레이는 스캔방향에 따라 상/하 양방향으로 참조데이터를 입력받을 수 있으며, 인접한 복수 스캔경로들의 데이터 재사용을 위한 RE 어레이가 2D PE어레이와 함께 좌/우 양방향으로 로테이트가 가능하도록 구성되어 있다. 4방향 검색윈도우는 Magnachip 0.18um공정으로 구현되어 H.264 움직임추정 메모리대역폭을 개선하여 2D PE 아키텍처 사양 참조 프레임 1장, 검색영역 $48{\times}48$, 매크로 블록 $16{\times}16$의 HD영상($1280{\times}720$)을 149.25MHz에서 실시간처리하는 성능을 보였다.

Resolution Recovery 기반의 Astonish 영상 재구성 기법의 평가 (The Evaluation of Resolution Recovery Based Reconstruction Method, Astonish)

  • 승종민;이형진;김진의;김현주;김중현;이재성;이동수
    • 핵의학기술
    • /
    • 제15권1호
    • /
    • pp.58-64
    • /
    • 2011
  • SPECT 영상에서의 resolution recovery를 기반으로 하는 3D 재구성 기법은 detector면으로부터 거리에 의한 공간적 blur를 보상하여 높은 spatial resolution과 contrast를 가지는 특징이 있다. 본 논문에서는 이러한 재구성 기법 중의 하나인 Philips사의 Astonish 프로그램을 phantom 실험을 통하여 기존의 재구성 기법과 비교, 평가하고 임상적 유용성을 높이고자 하였다. Skylight SPECT system (Philips)에서 NEMA IEC PET body phantom과 Flanges Jaszczak phantom (Data Spectrum corp.)을 이용하여 시간과 거리에 따른 4가지의 다른 입력 조건에서 실험을 실시하였다. 가까운 거리와 먼 거리 (짧은 거리보다 10 cm 더해진 거리)에서 각각 full time (40 kcts/frame)과 half time (full time의 절반)을 적용하여 영상을 얻고, iteration 수에 변화를 주어 MLEM, 3D-OSEM, Astonish로 영상을 재구성하였다. NEMA IEC PET body phantom의 각 sphere에서 background variability에 따른 contrast ratio의 변화양상을 확인하고 각 재구성 기법에서의 최적의 iteration 수를 찾아보았다. 이로부터 얻은 최적의 iteration 수를 Jaszczak phantom 영상의 재구성에 적용하여 비교해보고 실제 환자의 myocardial SPECT data에 대하여 육안적 평가를 실시하였다. 전반적인 contrast ratio는 Astonish가 MLEM과 3D-OSEM보다 높았다. 직경 37 mm의 가장 큰 hot sphere에서 짧은 거리에서는 Astonish가 MLEM과 3D-OSEM보다 각각 27.1%와 17.4%의 더 높은 contrast ratio를 보였고, 먼 거리에서는 40.5%와 32.6%로 더 높았다. 그러나 시간에 따른 변화의 차이는 크게 나타나지 않았다. 또한, 육안적 평가에서 Astonish가 다른 두 재구성 기법에 비하여 더 좋은 영상을 보였다. 이 실험에서는 정량적 분석 및 육안적 평가를 통하여 Astonish가 기존의 영상 재구성 기법인 MLEM과 3D-OSEM에 비하여 시간을 단축시켜 업무의 효율성을 높일 뿐만 아니라 질적으로도 우수한 영상을 구현하여 임상적으로 신뢰성이 높은 검사 결과를 제공할 수 있음을 확인하였다.

  • PDF

백라이트 유닛의 결함 검사를 위한 비전 시스템 개발 (Development of Vision system for Back Light Unit of Defect)

  • 한창호;오춘석;유영기;조상희
    • 대한전기학회논문지:시스템및제어부문D
    • /
    • 제55권4호
    • /
    • pp.161-164
    • /
    • 2006
  • In this thesis we designed the vision system to inspect the defect of a back light unit of plat panel display device. The vision system is divided into hardware and inspection algorithm of defect. Hardware components consist of illumination part, robot-arm controller part and image-acquisition part. Illumination part is made of acrylic panel for light diffusion and five 36W FPL's(Fluorescent Parallel Lamp) and electronic ballast with low frequency harmonics. The CCD(Charge-Coupled Device) camera of image-acquisition part is able to acquire the bright image by the light coming from lamp. The image-acquisition part is composed of CCD camera and frame grabber. The robot-arm controller part has a role to let the CCD camera move to the desired position. To take inspections of surface images of a flat panel display it can be controlled and located every nook and comer. Images obtained by robot-arm and image-acquisition board are saved on the hard-disk through windows programming and are tested whether there are defects by using the image processing algorithms.

RADIOPROTECTIVE EFFECT OF ALGIN-OLIGOSACCHARIDE THROUGH MEASURING CASPASE-3 AND CASPASE-9 IN MICE

  • Choi, Seong-Kwan;Jung, Woon-Kwan;Lee, Kyu-Soo;Jang, Young-Il;Dong, Kyeong-Rae
    • Journal of Radiation Protection and Research
    • /
    • 제32권4호
    • /
    • pp.134-139
    • /
    • 2007
  • In order to find out the Radioprotective effect of algin-oligosaccharide(AOS), this study, with a mouse of which whole frame irradiated by 3 Gy radiation once, measured caspase-3 and caspase-9 amid cell signaling connected to apoptosis in order to observe cell activation. In Caspase-3 and Caspase-9 test for observing cell activation, both of Caspase-3 and Caspase-9 showed highly increased O.D. value in the irradiation control group, while the whole groups treated with algin-oligosaccharide before or after irradiation indicated lower O.D. value than the irradiation control group, especially showed big difference in 7 day's treatment group of before irradiation (P<0.001). It confirmed that Caspase generation was restrained in AOS treatment group. Consequently, this study inquired into the fact that algin-oligosaccharide with superior antioxidant activity performed radiation protection by inducing restraint of Caspase generation and confirmed that natural product with less chemical toxicity was able to be applied as radioprotector.

해양환경중에서 자동차 프레임용 강재의 부식피로균열전파거동에 관한 연구 (Study on the Corrosion Fatigue Crack Propagation Behavior of Steel Used for Frame of Vehicles in Marine Environment)

  • 이상열;임종문;이종악
    • 한국해양공학회지
    • /
    • 제6권2호
    • /
    • pp.76-84
    • /
    • 1992
  • In this study, corrosion fatigue test of SAPH45 steel was performed by the use of plane behavior of base metal (BM) and heat affected zone (HAZ) of SAPH45. The main results obtained are as follows: 1) The more aspect ratio (b/t) of corner crack decreases, the more aspect ratio (b/a) takes greatly effect by corrosion. 2) The correlation between the stress intensity factor range ($\Delta$k) and crack growth rate (da/dN) for weldment in seawater is given by Paris rule as follow: da/dN=C($\Delta$K) super(m). Where m is constant, and the value is 3.82-3.84. 3) The accelerative factor ($\alpha$) of BM and HAZ under seawater is about 1.1-1.9, and ($\alpha$) of HAZ increases more and more under the low $\Delta$K region. 4) HAZ is more susceptible to corrowion than BM because of potential of electrode (E sub(c)) of HAZ becomes more less noble potential than that of BM.

  • PDF

초기 설계단계에서의 셋 베이스 다목적 설계 최적화(제4보) : CAD와 CAE의 통합 시스템에의 적용 (Set-Based Multi-objective Design Optimization at the Early Phase of Design (The Fourth Report) : Application to Integrated CAD and CAE System)

  • 남윤의;마사토 이노우에;하루오 이시가와
    • 산업경영시스템학회지
    • /
    • 제35권1호
    • /
    • pp.181-187
    • /
    • 2012
  • Various computer-based simulation tools such as 3D-CAD and CAE systems are widely used to design automotive body structure at the early phase of design. Designers must search the optimal solution that satisfies a number of performance requirements by using their tools and a trial-and-error approach. In the previous three reports, a set-based design approach has been proposed for achieving design flexibility and robustness while capturing designer's preference, and its effectiveness has been illustrated with a simple side-door impact beam design problem and real vehicle side-door structure design. This report presents the development of integrated 3D-CAD and CAE system, and the applicability of our proposal for obtaining the multi-objective satisfactory design solutions by applying to an automotive front-side frame.

3차원 형상측정을 위한 전자 스페클 등고선 추출법에 관한 연구 (A Study on Elecctronic Speckle Contouring for 3-D Shape Measurement)

  • 김계성
    • 한국공작기계학회:학술대회논문집
    • /
    • 한국공작기계학회 1998년도 춘계학술대회 논문집
    • /
    • pp.239-244
    • /
    • 1998
  • ESP(Electronic Speckle Pattern Interferometry) is an optical technique to measure deforamtion of engineering components and materials in industrial areas. ESPI, a non-contact and non-destructive measuring method, is capable of providing full-field results with high spatial resolution and high speed. One of important application aspects using electronic speckle pattern interferometry is to generate contours of a diffuse object in order to provide data for 3-D shape analysis and topography measurement. The electronic speckle contouring is suitable for providing measurement range from millimeters to several centimeters. In this study, we introduce the contouring method by modified dual-beam speckle pattern interferometer and a shift of the two illumination beams through optical fiber in order to obtain the contour fringe patterns. Before the experiments, we performed the geometric analysis for dual-beam-shifted ESPI contouring. And by this geometric analysis, we performed the electronic speckle contouring experiment. We used 4-frame phase shifting method with PZT for quantitative analysis of contour fringes. Finally, we showed good agreements between the geometric analysis and experimental results.

  • PDF