• Journal of Life Science
• /
• v.31 no.1
• /
• pp.37-46
• /
• 2021

The effects of freeze-dried powder from fresh and black garlic hot water extracts on the lipid metabolism in Sprague-Dawley rats fed a high-cholesterol diet were analyzed. The experimental group was classified into the normal group (NG), the high-fat (HF) and high-cholesterol diet group (CG), the HFC and 1% fresh garlic hot water extract powder-added diet group (FGEG), and the HFC and 1% black garlic hot water extract powder-added diet group (BGEG), respectively. The serum total lipid content was 381.52±7.30 mg/ml and 368.80±4.40 mg/ml in the FGEG and the BGEG, respectively, and was significantly lower than that of the CG. The total cholesterol and triglyceride contents of the FGEG and BGEG were also significantly lower than that of the CG. The high-density lipoprotein (HDL) cholesterol was significantly higher, and the low-density lipoprotein (LDL) and the very low-density lipoprotein (VLDL) cholesterol content was lower in the FGEG and BGEG than in the CG. The serum ALT and AST activities were significantly lower than those of the CG, and especially the BGEG was lower. The total cholesterol content and the triglyceride levels of the liver tissue were 36.0% and 14.3% lower in the BGEG than in the CG, respectively. The thiobarbituric acid reactive substance (TBARS) concentrations in the serum and the liver tissue were higher in the CG than in the FGEG and BGEG, but there was no difference between them. Based on these results, garlic extract powders significantly reduced the lipid profile and increased the antioxidant activity in rats in vivo. The black garlic hot water extract powder was more effective than raw garlic because of the total number of phenolic compounds and browning substances in the black garlic.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.67 no.1
• /
• pp.27-40
• /
• 2022

Building self-sustainable rural infrastructure and environment through smart digital agriculture technology innovation is one of the major goals of the Korean agricultural administration as a part of the nation's 4^th industry revolution. To identify areas for improving and effectively investing in the acceleration of rural development, 207 experts in the areas of crop science and smart digital agriculture technology were interviewed for their opinions and suggestions on 22 questions designed to recognize fundamental agricultural issues to be addressed and solutions to advance technology innovation and rural development. Majority of the participants expected smart digital agriculture technologies to resolve major agricultural issues and help build a better rural environment. To overcome technology gaps and resolve issues more effectively, further investment in training new technology experts and building stronger agricultural technology infrastructure is urgent, and persistent and systematic support from agricultural administration appears to be the key for accelerating the process. While the leading global groups of both public and private sectors have advanced their technologies beyond the field application stage, most of the Korean technologies remain at the early pilot stage. Aging population and lack of labor in rural areas, unknown future climate change, and challenges in sustainable rural development are expected to be resolved by smart digital agriculture technologies. Technological innovations by research institutes should be promptly deployed in the crop production field, and farm training systemically organized by local technology centers can accelerate farming revolution. Standardization of equipment and data systems is another key to the success of digitalization of food crop production and food supply chains nationwide.

• The Journal of Korean Society for Radiation Therapy
• /
• v.33
• /
• pp.15-24
• /
• 2021

This study is about the introduction and usefulness evaluation of the manufacturing method of the bolus-helmet. Helmet-production for the treatment of scalp tumor patients has been tried and will continue in many creative and various ways. However, Most of the research data did not significantly reduce the psychological burden and physical and physical discomfort that the patient had to bear due to the time and economic cost required for the production of the helmet, the convenience of production, and the complexity of the process. In addition, recently, studies using more advanced technologies and equipment such as 3D-printer technology, which are being studied as a way to increase the treatment effect, are being introduced, but the time, economic cost, and psychological and physical burden are still the sole responsibility of the patient. Isn't it getting worse? The reality is that the thoughts of concern cannot be erased. Therefore, by maintaining the physical properties of the bolus and manufacturing a helmet without incurring additional costs, the physical and physical discomfort aggravated to the patient was reduced and the procedure and time for helmet manufacturing were minimized. In this way, it was possible to reduce the time, economic cost, and physical discomfort required for the production of the helmet, and it was also possible to minimize the psychological burden of the patient, although it is invisible. Additionally, in evaluating the usefulness of helmets, we are able to continuously seek and develop ways to reduce the air-gap interval, and as a result, we will be able to introduce a method to keep it within 2.0mm along with the manufacturing method through this study. I feel very welcome. Finally, I hope that anyone working in the Department of Radiation Oncology will be able to easily manufacture the helmet required for radiation therapy using a bolus through the guide-line on helmet manufacturing provided by this institute. I hope and hope that if you have any questions or inquiries that arise during the production process, please feel free to contact us through the researcher's e-mail or mobile phone at any time.

• Journal of Life Science
• /
• v.32 no.11
• /
• pp.872-881
• /
• 2022

In this study, we optimized the composition of the indole-3-acetic acid (IAA) production medium using response surface methodology on Pantoea agglomerans SRCM 119864 isolated from soil. IAA-producing P. aglomerans SRCM 119864 was identified by 16S rRNA gene sequencing. There are 11 intermediate components known to affect IAA production, hence the effect of each component on IAA production was investigated using a Plackett-Burman design (PBD). Based on the PBD, sucrose, tryptone, and sodium chloride were selected as the main factors that enhanced the IAA production at optimal L-tryptophan concentration. The predicted maximum IAA production (64.34 mg/l) was obtained for a concentration of sucrose of 13.38 g/l, of tryptone of 18.34 g/l, of sodium chloride of 9.71 g/l, and of L-tryptophan of 6.25 g/l using a the hybrid design experimental model. In the experiment, the nutrient broth medium supplemented with 0.1% L-tryptophan as the basal medium produced 45.24 mg/l of IAA, whereas the optimized medium produced 65.40 mg/l of IAA, resulting in a 44.56% increase in efficiency. It was confirmed that the IAA production of the designed optimal composition medium was very similar to the predicted IAA production. The statistical significance and suitability of the experimental model were verified through analysis of variance (ANOVA). Therefore, in this study, we determined the optimal growth medium concentration for the maximum production of IAA, which can contribute to sustainable agriculture and increase crop yield.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.50 no.2
• /
• pp.23-40
• /
• 2022

Many constructed wetlands have been installed in dam reservoirs nationwide for ecological purification of watershed pollutants, but aging and reduced efficiency are becoming issues. To improve the management of constructed wetlands, an objective evaluation of structural suitability is required. This study evaluated 39 constructed wetlands of 15 dams. First, through fogus group interview(FGI), survey analysis, and analytic hierarchy process(AHP), eight evaluation items in the physical and vegetative aspects were selected and the evaluation criteria applied with weights were prepared. Second, as a result of the structural suitability evaluation, the average score of the overall constructed wetlands was 80.8, with 10 sites rated as 'good grade(91~100)', 22 sites rated as 'normal grade(71~90)' and 7 sites rated as 'poor grade(70 or less)'. The average score of physical structure evaluation was 52.6, with 14 sites rated as 'good', 21 sites as 'normal' and 4 sites as 'poor'. The suitability of location was good level in most constructed wetlands, but the water supply system, depth of water, ratio of length-to-width, and slope of flow channel were evaluated as 'normal' or less in constructed wetlands of 50% or more. Therefore, it was found that overall improvement was necessary for stable flow supply and flow improvement in the constructed wetland. The average score of vegetative structure evaluation was 28.2, and about 84% of them were identified as 'normal' or lower. As a result of analyzing the Spearman's correlation coefficient between the physical structure evaluation score and the vegetation structure evaluation score, there was a significant correlation(r = 0.728, p < 0.001), and it was found that each evaluation factor also influences each other. As a result of the case review of 6 constructed wetlands, the appropriateness of the evaluation results was confirmed, and it was found that the location, flow rate supply, and type of wetland had a great influence on the efficiency and operation of the wetland. Through this study, it will be possible to derive structural weaknesses of constructed wetlands in dam reservoirs as a nature-based solution, to prepare types and practical alternatives for improved management of each constructed wetland in the future, and to contribute to enhancing various environmental functions.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.2
• /
• pp.260-267
• /
• 1995

In temperate zone planting rice at different date subjects the Crop to different climatic condition. The present study aimed at comparison of the change in source-sink relationship of the Japonica(J) and that of IndicaxJaponica(I$\times$J) type rice cultivars caused by shift of heading date. Two J- and two I$\times$J-type cultivars were made to head on August 16, August 26, and September 5. Sink capacity was changed by shift of heading date in different mode between the types of cultivars. In both types major determinant of sink capacity was number of effective tillers, and the number of spikelets per panicle was the minor. In J-type earlier planting/heading was beneficial to increased panicle numbers and this was due mainly to a larger diurnal difference in temperature. I$\times$J-type cultivars favored a higher daily mean temperature to increase the sink capacity. The ability of source at heading, in terms of leaf area per panicle, chlorophyll content per spiklet, photosynthetic ability of leaves per unit area at 25$\^{\circ}C$, carbohydrate and N contents of leaves, was not so different among different heading dates in both types. However, the source activity was governed principally by temperature during grain filling. The J-type cultivars headed on Sept. 5 and I$\times$J-type cultivars headed later than August 16 could not have had sufficient source activity in grain filling due to lower temperature.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.1
• /
• pp.98-102
• /
• 1995

Popped popcorn generally have a regular popping direction and typical shape. But the reason and mechanism are not clear yet. This experiment was carried out to investigate the shape moulding factor of popped popcorn. Pericarp thickness of tip-cap section of kernels is slightly thicker than that of top section and this fact provides the important information to the reason. Popping starts when the moisture pressure of heated popcorn is increased and reaches at the critical pressure. Therefore, in the same moisture pressure conditions, top sections are bursted first because their pericarp section is thinner than that of tip-cap section. At the very moment tip-cap sections pull down the top sections of peri carp as bi-metal does. So kernels which removed tip-cap section showed the irregular popping shape because they lost the tip-cap pericarp function. How-ever, kernels which removed embryo showed the typical popping shape but their popping volume was small due to emition and shortage of critical moisture pressure. But kernels which removed the whole pericarp and top pericarp were not popped at all because moisture was entirely emitting out of kernels. These results suggest that the shape moulding factor of popped popcorn is the pericarp thickness differences between the top and tip-cap section of kernels.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.3 no.1
• /
• pp.142-157
• /
• 2001

This study was conducted to get the basic information for promoting farm machinery productivity by surveying the regular maintenance and repair status of major farm machinery such as power tiller, farm tractor, rice transplanter and combine harvester. The survey was carried out through 9 provinces including Cheju province by direct visiting farmers with prepared questionnaire. The results of this study can be summarized as follows : 1. The average farming carrier of the surveyed farmers was 25.3 years, and 21-30 years of farming carrier showed the highest portion as 40.7%. The average carrier of using farm machinery was 9.4 years, and that was 14.9 years for power tiller, 8.3 years for farm tractor, 9.0 years for rice transplanter, 7.9 years for combine harvester, 7.5 years for mini tiller, 9.7 years for power sprayer, and 8.2 years for binder etc. 2. The regular maintenance for farm machinery was conducted mainly at repair shop (49.5%) or dealer agency (12.0%) as 61.5%, and 34.9% of farmers conducted the regular maintenance by themselves at their house. 3. The reasons for not-fully recognizing operation manual and insufficient before-, during-, after-maintenance of farm machinery were insufficient time for them (45.8%), troublesome (22.9%), unknown maintenance method (16.3%), unknown the necessity for maintenance (12.4%), and others (2.6%) in order. 4. For the annual exchange of engine oil, 3.2 times is necessary but actually 1.7 times was exchanged for power tiller, 4.3 times is necessary but actually 1.9 times was exchanged for farm tractor, 2.7 times is necessary but actually 1.7 times was exchanged for rice transplanter, 2.2 times is necessary but actually 2.3 times was exchanged combine harvester. 5. For the annual cleanness or exchange of fuel filter, 3.2 times is necessary but actually 1.1 times was done for power tiller, 4.3 times is necessary but actually 1.6 times was done for farm tractor, 2.7 times is necessary but actually 1.7 times was done for rice transplanter, 1.9 times is necessary but actually 0.8 times was done for combine harvester. 6. For the annual cleanness or exchange of air filter, 3.2 times is necessary but actually 1.4 times was done for power tiller, 4.2 times is necessary but actually 2.4 times was done for farm tractor, 2.6 times is necessary but actually 1.6 times was done for rice transplanter, 3.9 times is necessary but actually 7.0 times was done for combine harvester. 7. For the experience of breakdown related to maintenance, 5.3% of farmers experienced breakdown due to the insufficient exchange of engine oil, 7.7% of farmers experienced breakdown due to the insufficient cleanness or exchange of fuel filter, and 2.9% of farmers experienced breakdown due to the insufficient cleanness or exchange of air filter. 8. Most farmers (76.1%) recognized the necessity for agricultural machinery training or education, and most farmers preferred about one week for the training period, simple or ease maintenance for the training level, agricultural technical center or agricultural machinery manufacturer for the training agency. 9. Complete recognition of operation manual and sufficient before-, during-, and after-maintenance for farm machinery can minimize the breakdown as well as conduct suitable period farming, enlarge the endurance, prevent the safety accidents, and promote productivity of farm machinery. Therefore, these can be accomplished by the thorough training or education for agricultural machinery.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.21 no.1
• /
• pp.49-59
• /
• 2019

The field trial was performed to evaluate the rice growth and yield in different direct seeding methods after Italian Ryegrass Harvest The required time for seed emergence was for 7 ~ 8days in the tested direct seeding methods and there was high in seedling establishment in order of wet hill-seeding with iron-coated seeds > water seeding with iron-coated seeds > wet hill-seeding with soil coverage with pregerminated seeds. The rice plant height was shorter in the tested direct seeding methods than that of machine transplanting until 45day after seeding but there was not significant difference in terms of statistical analysis at 63day after seeding. The growth of tiller number in the rice plant was high in water seeding with iron-coated seeds and wet hill-seeding with soil coverage and low in wet hill-seeding with iron-coated seeds compared to machine transplanting. The yield component in the tested direct seeding methods was not significant difference in terms of statistical analysis. The milled rice yield in the tested direct seeding methods was higher 2 ~ 8% being with 4.94 ~ 5.24t/ha than that of machine transplanting but there was not significant difference in terms of statistical analysis. The percentage of head rice was low in the tested direct seeding methods compared to machine transplanting. The weedy rice was not occurred in the tested rice cultivation methods. In conclusion the direct seeding method would be recommended to be a suitable to in following by Italian ryegrass harvesting in southern area of Korea in terms of reduction in production cost and high income basis for rice growing farmers.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.103-103
• /
• 2022

다복찰은 전라북도농업 기술원에서 2012~2020년에 신명흑찰과 익산488호를 교배하여 육성한 찰벼이며, 중대립, 단간, 내도복, 다수성의 특징을 보인다. 동진찰은 1998년도에 육성되었으며, 우리나라에서 가장 인기 있는 찰벼이다(재배면적 25,161ha/2021년 기준). 드문모심기 재배 기술은 2017년부터 도입되었으며, 밀파 육묘하여 재식밀도 및 재식주수를 감소함으로써 소요되는 재료비 등 경비 및 투입되는 노동력을 절감하는 경제성 있는 기술이다. 따라서 본 연구는 전라북도농업기술원에서 육성한 다복찰 보급 확대 및 가장 인기 높은 동진찰의 드문모심기 재배기술 확립 일환으로 시작되었으며, 2024년까지 3년간 실시할 계획이다. 시험은 기술원 논 포장에서 실시하였으며, 시험품종은 다복찰, 동진찰, 시험요인은 이앙시기(3처리) 및 재식밀도(4처리)를 두었다. 이앙시기별로 이앙 17일 전에 온탕소독(62℃, 10분), 종자소독(32℃, 1일), 침종(32℃, 1일), 간이출하(30℃, 3일) 과정을 거쳐 부직포 육묘(12일 정도)를 실시하였다. 5월20일(이앙520)부터 5월30일(이앙530), 6월9일(이앙609)까지 10일 간격으로 드문모심기 전용 이앙기로 이앙하였으며, 주당 본수는 5.7개 정도였다. 이앙 시기별로 시험포장을 구분하였고 포장내에 2품종, 각각 3.3m2당 80주, 60주, 50주, 37주 등 재식밀도 처리구를 두었으며, 처리구마다 3반복 조사구(10주/반복, 5본/주) 설치하였다. 10a당 9-4.5-5.7kg(N-P₂O₅-K₂O)를 밑거름(50%)-분얼거름(20)-이삭거름(30) 등 3회 거쳐 시비하였다. 중간물떼기는 이앙32일째부터 10일간 실시하였으며, 예상 출수 30일 전에 충분하게 담수하였다. 이앙20일째부터 10일 간격으로 경수, 초장, 엽색도 등 생육 조사, 그리고 출수기, 후기 생육 및 병해충을 조사하였다. 향후 수확기에 수량, 수량구성요소, 미질 및 품위를 분석할 계획이다. 시험토양은 pH 6.0~6.3, EC는0.68~0.85dS/m, 유기물함량은 52~57g/kg 수준으로 높았다. 동진찰 발아율(94.0~98.1%)이 다복찰(89.9~94.9%)보다 우수하였다(3~6%P ↑). 다복찰 묘 충실도(102~106mg/주)가 동진찰(79~101mg/주)보다 다소 좋았으며, 이앙530 묘소질이 가장 좋았다. 동진찰 초장은 다복찰에 비해 다소 길었으나 이앙시기 및 재식밀도별 초장의 변화 유형은 비슷하였다. 이앙520구의 80주에서 초장이 가장 작았고 이앙609구에서는 80주에서 다소 길었으나, 처리구간의 유의성은 없었다. 동진찰 및 다복찰 경수는 37주에서 이앙 후 40일째, 50주, 60주, 80주에서는 30일째 가장 컸다. 출수기는 다복찰에 비해 동진찰이 3~7일 정도 빨랐으며, 특히 이앙520 동진찰에서는 재식밀도가 높을수록 출수기가 빠른 경향을 보였으며, 이앙530 이후에는 재식밀도간 차이가 거의 없었다. 동진찰에 비해 다복찰 간장이 3~6cm 작았으며, 2품종 모두 이앙609구에서 가장 낮은 값을 보였다. 수장도 간장과 비슷한 경향을 보였다. 수수는 2품종 모두 이앙이 늦을수록 증가하였으며, 37주에서 가장 높았으며, 80주에 비해 다복찰, 동진찰 각각 73.8%, 77.4% 높았다. 다복찰의 경우 3.3m²당 수수는 이앙시기별과 관계없이 상대적으로 80주에서 가장 많았고 이앙520에서 재식밀도간 차이는 감소하였지만 이앙시기가 늦을수록 수수는 증가하는 경향을 보였다. 동진찰도 비슷한 경향을 보였으며, 이앙520과 이앙609 사이에 수수 차이는 적었다. 병 발생은 잎집무늬마름병, 세균성벼알마름병, 이삭누룩병이 주로 관찰되었으며, 세균성 벼알마름병은 출수기와 맞물린 이앙530에서 가장 크게 발생하였으며, 이앙520도 비슷한 경향을 보였다. 이삭누룩병 발생이 심하였는데 재식밀도간 차이보다는 이앙시기별 차이가 더 크게 발생하였으며 품종 간의 병 발생 차이는 없었다. 이상의 결과로 수수 측면에서 조기 이앙할 경우에는 50~60주, 늦은 이앙 시에는 80주가 유리할 것으로 보이며, 추후주당 립수, 등숙률, 천립중 등을 조사하고 경영비 등을 고려하여 합리적인 이앙시기 및 재식밀도를 판단할 수 있을 것으로 판단된다.