• Journal of Veterinary Clinics
• /
• v.28 no.1
• /
• pp.13-19
• /
• 2011

Semen cryopreservation induces the formation of reactive oxygen species (ROS), and the ROS cause sperm damage. We aimed to investigate the effects of the antioxidative enzyme catalase (CAT) on sperm quality and ROS during cryopreservation. Sperm rich fractions collected from five Duroc boars were cryopreserved in freezing extender with (200 or 400 U/mL) or without CAT (control). After thawing, sperm motility, viability, normal morphology, plasma membrane integrity, mitochondrial function and intracellular ROS were evaluated. CAT significantly improved total sperm motility at a concentration of 400 U/mL (P < 0.05), but didn't improve progressive sperm motility, viability, morphological defects, plasma membrane integrity and mitochondrial function in frozen-thawed boar sperm. In evaluation of ROS, CAT had no effect on reduction in ${\cdot}O_2$, but scavenged $H_2O_2$ in viable frozen-thawed boar sperm at concentrations of 200 and 400 U/mL (P < 0.05). In conclusion, CAT was not enough to improve quality of frozen-thawed sperm, but can reduce $H_2O_2$ generation in viable boar sperm during cryopreservation.

• Analytical Science and Technology
• /
• v.20 no.5
• /
• pp.400-405
• /
• 2007

The comparative analysis of glycerin in cosmetic samples was carried out by LC/MS and $^1H$ NMR spectrometry. For the LC/MS analysis, aqueous solution was controlled in strong basic condition with sodium hydroxide, and benzoyl chloride was added to the solution for the derivatization of glycerin. The derivative was extracted using pentane and analyzed by the LC/MS. For the $^1H$ NMR analysis, sample was directly dissolved in $D_2O$ solvent without pretreatment. The quantitative analysis of glycerin was done by $^1H$ NMR ERETIC method. The analysis results of LC/MS and $^1H$ NMR showed that the calibration curves were a good linearity with $r^2=0.9991$ in the range of 0.1 to $10{\mu}g/mL$ and $r^2=1$ in the range of 25 to $500{\mu}g/mL$, respectively.

• Journal of the Korean Chemical Society
• /
• v.43 no.6
• /
• pp.651-655
• /
• 1999

Xylenol Orange was bonded on an anion-exchange resin (Amberlite lRA 400, in $Cl^-$form) by batch equilibration. The resin was proved to be stable in acidic solutions of about 0.1 M HCl, $HNO_3$ or $H_2SO_4$. Sorption capacities for the metal ions on the Amberlite IRA 400 bonded with xylenol orange have been measured by batch method. The result showed that Fe(III) is higher than any other metals for sorption capacity. The preconcentration and the separation of Fe(lll) from the mixture soIution, therefore, were carried out with the 0.1 M sulfosalicylic acid as an eluent.

• Korean Journal of Food Science and Technology
• /
• v.33 no.5
• /
• pp.545-550
• /
• 2001

Effects of high hydrostatic pressure on pH, titratable acidity, color, hardness and microorganisms of Chinese Cabbage Kimchi were investigated. Kimchi was pressurized at $200{\sim}600$ MPa for 5 min. There were no significant differences in color and hardness between control and pressurized Kimchi (p>0.05). Total aerobes and lactic acid bacteria were effectively inactivated by high hydrostatic pressure above 400 MPa. Changes in pH, titratable acidity, color, hardness and microbial counts for 4 weeks storage of Kimchi were investigated Kimchi was pressurized at 400 MPa for 5 min and stored at $4^{\circ}C$. The pH of control decreased to 3.94 but pressurized Kimchi maintained its initial pH value throughout the storage. The color of control showed significantly low values compared with pressureized Kimchi (p<0.05), but hardness was not significantly changed (p>0.05). Total aerobes and lactic acid bacteria in the control were reduced from the initial value of $10^8{\sim}10^9$ CFU/mL to $10^6$CFU/mL after 4 weeks storage. Whereas microbial counts in pressurized Kimchi was maintained about $10^3{\sim}10^4$ CFU/mL during storage.

• Journal of Welding and Joining
• /
• v.30 no.5
• /
• pp.34-39
• /
• 2012

This study was conducted to investigate the microstructure and mechanical properties of friction stir lap joints. Invar 42 and SS 400 were selected as the experimental materials, and friction stir welding was carried out at a tool rotation speed of 200 rpm and welding speed of 100 mm/min. The application of friction stir welding to Invar 42 effectively reduced the grain size in the stir zone; the average grain size of Invar 42 was reduced from $11.5{\mu}m$ in the base material to $6.4{\mu}m$ in the stir zone, which resulted in an improvement in the mechanical properties of the stir zone. The joint interface between Invar 42 and SS 400 showed a relatively sound weld without voids and cracks, and the intermetallic compounds with $L1_2$ type in lap jointed interface were partially formed with size of 100 nm. Moreover, the hook in the advancing side of Invar 42 was formed from SS 400, which contributed to maintenance of the tensile strength. The evolution of microstructures and mechanical properties of friction stir lap jointed Invar 42 and SS 400 are also discussed herein.

• Journal of the Korean Chemical Society
• /
• v.29 no.3
• /
• pp.295-303
• /
• 1985

Carboxypeptidase B from Salmo Salar eggs was purified by CM-cellulose, 0.5 ammonium sulfate saturation, DEAE-cellulose, and Sephadex G-75 gel filtration and its enzymatic properties were investigated. Optimum temperature was 55$^{\circ}C$, pH optima were 4.0 and 7.0 at 37$^{\circ}C$, and the enzyme was stable at pH 2.0∼3.0 and 5.5∼7.0 for 1.5h. This enzyme showed substrate specificity hydrolyzing the peptide bond of glycyl-L-arginine. Its K$_m$ values was 0.21mM, and the enzyme activity was stimulated by Cu$^{2+}$ and Fe$^{3+}$, while inhibited by Zn$^{2+}$. The lysine was found to be competitive inhibitor and its K$_i$ value was determined to be 4.3mM. Molecular weight of this enzyme was determined to be 36,400 daltons by SDS-PAGE and the enzyme was monomeric protein composed of 19 kinds of amino acid residues.

• Korean Chemical Engineering Research
• /
• v.55 no.3
• /
• pp.307-312
• /
• 2017

In this study, the electrochemical performance of surface modified carbon using the PFO (pyrolyzed fuel oil) was investigated by chemical activation with KOH and $K_2CO_3$. PFO was heat treated at $390{\sim}400^{\circ}C$ for 1~3h to prepared the pitch. Three carbon precursors (pitch) prepared by the thermal reaction were 3903 (at $390^{\circ}C$ for 3h), 4001(at $400^{\circ}C$ for 1h) and 4002 (at $400^{\circ}C$ for 2h). Also, the effect of chemical activation catalysts and mixing time on the development of porosity during carbonization was investigated. The prepared carbon was analyzed by BET and FE-SEM. It was shown that chemical activation with KOH could be successfully used to develop carbon with specific surface area ($3.12m^2/g$) and mean pore size (22 nm). The electrochemical characteristics of modified carbon as the anode were investigated by constant current charge/discharge, cyclic voltammetry and electrochemical impedance tests. The coin cell using pitch (4002) modified by KOH has better initial capacity (318 mAh/g) than that of other pitch coin cells. Also, this prepared carbon anode appeared a high initial efficiency of 80% and the retention rate capability of 2C/0.1 C was 92%. It is found that modified carbon anode showed improved cycling and rate capacity performance.

• Journal of Korean Society of Forest Science
• /
• v.103 no.4
• /
• pp.556-563
• /
• 2014

The purpose of this study was to evaluate the effects of container types on seedling growth of Chamaecyparis obtusa (2-year-old) in the container nursery culture. We used three container types [20 cavities (400 mL/cavity, $150seedlings/m^2$), 24 cavities (320 mL/cavity, $200seedlings/m^2$), and 35 cavities (240 mL/cavity, $260seedlings/m^2$)] and measured root collar diameter (RCD), height, biomass, root density and seedling quality index (SQI). The RCD, height, biomass, root density and SQI were the highest at 20 cavities/tray because this container has the largest volume and lowest seedling density. However, H/D and T/R ratio at all container types were not significantly different. The total biomass per unit area ($m^2$) were the lowest at 35 cavities/tray and those at both 20 and 24 cavities/tray were not significantly different. Container volume was positively correlated with RCD, height, biomass, root density and SQI except for H/D and T/R ratio, while seedling density negatively affected on them. Based on these results, 20 cavities/tray are optimal for container seedling production of C. obtusa. Usage of optimal container will make us get better quality seedlings and reduction of production costs in the container nursery as well as good field performances with higher survival rate in plantation.

• Journal of the Korean Society for Heat Treatment
• /
• v.17 no.1
• /
• pp.29-35
• /
• 2004

The effect of low tempering in a temperature range of $150{\sim}400^{\circ}C$ on corrosion resistance in 420J2 stainless steel austenitized at $1000^{\circ}C$ was investigated by the application of salt spray test, electrochemical pitting test in 3.5% NaCl solution and DL-EPR test for intergranular corrosion in 0.5M $H_2SO_4$+0.01M KSCN solution. In salt spray test, good corrosion resistance was obtained in a tempering temperature range of $150{\sim}250^{\circ}C$. Pitting potential was increased to the tempering temperature of $250^{\circ}C$, but decreased with the increase of temperature up to $400^{\circ}C$ And it was thought that the degradation of pitting corrosion resistance showed at the tempering temperature of around $400^{\circ}C$ was due to the precipitation of $Cr_7C_3$ of $M_7C_3$ type. The degree of sensitization showed increasing tendency with the increase of tempering temperature, and also Cr depletion phenomena were observed in the vicinity of grain boundary.

• Tunnel and Underground Space
• /
• v.15 no.5 s.58
• /
• pp.378-386
• /
• 2005

Jook-Ryung roadway tunnel was constructed by drill-blast after pilot tunnelling by 2 TBMS. nis report analyzes the data for TBM performance in the total length of 7.3 km for the two pilot tunnels. Net penetration rates were recorded as high as 2.3 m/h and 2.0 m/h for the two different directions while degrees of operation were $31.4\%$ and $33.3\%$, respectively. The cutter lives for No.2 tunnel were evaluated $200\~280\;m^3/c$ and around 400 m/set as high as for Meraker 10 km tunnel in Norway. The relationship between net penetration rate and characteristics of rock mass which were obtained by RMR and TSP measurement, coincides with the prior studies. This kind of evaluation is expected to be used to design TBM tunnelling and to help to perform the TBM operation effectively