• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.5
• /
• pp.87-93
• /
• 2005

In order to develope high concentration$\cdot$yield ozonizer, superposed discharge type ozonizer using overlap of silent discharge and internal electrode of mesh type has been designed and manufactured. It consists of three electrodes(central electrode, internal electrode and external electrode) and double gaps(gap between central electrode and internal electrode, gap between internal electrode and external electrode). Therefore, ozone is generated by overlapping silent discharges generated between the gaps respectively for which the AC high voltages applied to the internal electrode and the external electrode has a $180{[^\circ]}$ phase difference and for which the central electrode is a ground Ozone generation characteristics proportional to mesh of internal electrode by increasing of discharge electrode and controlling of discharge power density. As a result, the in maximum ozone concentration, generation, and yield can be obtained 17,720[ppm], 5.4[g/h], and 205[g/kwh] respectively.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.4
• /
• pp.139-149
• /
• 2019

As of 2018, a large amount of Chinese fine dust is flowing into Korea in westerlies. However, the amount of fine dust generated in Korea can not be ignored. Even 52% of the causes of fine dust are domestic factors. Especially in Seoul, where the population is densely populated, the dust levels are high enough to be comparable to other regions. In Seoul, the dust levels are different from each other district. In order to understand the difference of fine dust generation by distinction, it is judged based on the highest traffic volume among the causes of fine dust generation in Seoul. Comparing the traffic volume and the fine dust concentration in 2017, it is possible to know the effect of traffic volume actually, how much it affects.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.23 no.4
• /
• pp.133-148
• /
• 2021

Due to the COVID-19 pandemic, many people started working from home while avoiding unnecessary going-outs. As the 'stay-at-home life' becomes standard daily life, the pajamas market is absorbing young consumers, especially targeting Generation MZ, by using one-mile fashion that breaks down the boundary with everyday clothes. Also, owing to the demand for environmentally-friendly textiles, based on the strengthened environmental regulations, the development of textiles considering the environment is expanding. Thus, the purpose of this study is to develop fashion pajamas using environmentally-friendly textiles targeting Generation MZ. After theoretically considering the current status of recycled PETs and the pajama market by referring to preceding research, relevant books, and Internet data, this study performed the process setting up the design concepts, developing textiles, developing textile designs, and developing pajamas designs. As a result, this study wove two kinds of mixed textiles using recycled PETs and silk with the concept of 'Going out pajamas', and designed a total four patterns to be applied to those textiles, then digitally printed them. Using the developed textiles, this study produced a total four kinds of pajamas that were practical, trendy, and also good to be used as clothes for going-out. The consumers who are exhausted from the limited environment of the COVID-19 pandemic, are requesting comfortable and trendy in & out door fashion. For this reason, the results of this study are significant in the aspect of suggesting the new-normal fashion trend for pajamas designs.

• Journal of Hydrogen and New Energy
• /
• v.26 no.3
• /
• pp.206-211
• /
• 2015

For the hydrogen production, Gas Lab and Gnc make alkaline watrer electrolyzer and found optimized condition of experimental parameters of cell material and operating procedures. For the commercial production, we saved electric power consumption and caloric based efficiency with over 70%. Used cell pressures are 10 bar, 30 bar and consumed electricity is $4,000A/m^2$, 4.19 kW ($T=100^{\circ}C$) at 10 bar. Another data is $2,000A/m^2$, 3.92 kW ($T=95^{\circ}C$) at 30 bar. Applied voltage is 1.75 V ($100^{\circ}C$, 10 bar), 1.64 V ($95^{\circ}C$, 10 bar), 1.81 V ($85^{\circ}C$, 30 bar), 1.76 V ($95^{\circ}C$, 30 bar). As cell temperature increase, applied voltage has been decreased and current has been increased. The concentration of KOH solution is 30 weight %.

• ETRI Journal
• /
• v.39 no.3
• /
• pp.336-344
• /
• 2017

In this paper, we propose a convenient microwave orbital angular momentum (OAM) mode generation and multiplexing method operating in the 18 GHz frequency band, based on a $2{\times}2$ uniform circular array and a $4{\times}4$ Butler matrix. The three OAM modes -1, 0, and +1 were generated and verified using spatial S-parameter measurements; the measured back-to-back mode isolation was greater than 17 dB in the full 17 GHz to 19 GHz range. However, the radiated OAM beam centers were slightly dislocated and varied with both frequency and the mode index, because of the non-ideal characteristics of the Butler matrix. This resulted in mode isolation degradation and transmission distance limitations.

• Journal of the Korean Solar Energy Society
• /
• v.33 no.4
• /
• pp.70-79
• /
• 2013

These day cities experience serious climatic changes due to environmental load caused by disturbance in the circulation systems of water resources and energy. As technological improvement to respond to various climatic changes and disasters are also requested in the field of construction, inter-disciplinary studies linked to the establishment of sustainable environmental control and energy systems is required in a consilient perspective. This study aims to infer correlations in the impact of environmental changes caused by rooftop greening system on the photovoltaic power generation efficiency through computer simulation in an integrated perspective. By doing so, it seeks to provide basic study for developing a photovoltaic system integrated with building revegetation that is sustainable in environmental and resource aspects. A simulation showed that, in the case of sunshine hours in June, the green surface indicated temperature lowering effects of $9.19^{\circ}C$ on average compared to the non-green surface and temperature was $9.81^{\circ}C$ lower. Due to such greening effects, at the highest sunlight timepoint in June, Pmpp improved 119W and heat loss rate dropped 7.8%.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.4
• /
• pp.24-29
• /
• 2020

Measuring the torque of the wheel loader of a driving device is a preemptive task to ensure its performance. In this study, wireless torque measurements were successfully conducted. Moreover, based on the experimental results and the adopted design method, the key factor of torque generation, which is the main load in driving devices, was analyzed. Other data not analyzed in this paper will be the basis for the logical design of wheel loader-based driving devices.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.3
• /
• pp.319-329
• /
• 2016

Current research trends of prediction of possible structures, synthesis and explosive characteristics of polynitrogen molecules(PNs) are reviewed. Theoretically PNs are composed only of nitrogen atoms, in which N-N bonds are either single or double bonds, and thus when these molecules decompose, release of enormous energy is accompanied. From the middle of 20th century energetic material chemists have been seeking possible structures and the methods of synthesis of these new materials. As a results, from $N_4$ to $N_{60}$ together with their ions are predicted, and experimental chemists have been trying to synthesize these materials with a few success, including the famous ${N_5}^+$ ion in 1999. Although experimental successes are very rare beyond $N_5$ until today, the author believes that renovative ideas together with sincere efforts will bring someday next generation of high energy materials such as nitrogen fullerene($N_{60}$) in reality.

• Journal of Christian Education in Korea
• /
• v.74
• /
• pp.33-55
• /
• 2023

This study aims to explore the direction of Christian public practice in the post-COVID era, seeking to overcome the uncanny feeling caused by increased division and exclusion during the pandemic period. Firstly, we will investigate the unequal impact of COVID-19 on the labor market and examine ways to achieve economic justice in the post-COVID era. Subsequently, we will deliberate the role of Christianity in establishing publicness in the digital world and virtual spaces. Finally, viewing COVID-19 as a catastrophe caused by an anthropocentric worldview and exploitation driven by greed, we will explore the tasks of Christianity to overcome the crisis of the Anthropocene. Christian public practice should fulfill its mission of care and stewardship not only in social context but also in an ecological dimension. The author proposes "planetary citizenship education" for a harmonious relationship between human species and the Earth they inhabit.

• International Journal of Fluid Machinery and Systems
• /
• v.4 no.4
• /
• pp.396-409
• /
• 2011

Water turbines have been used in electricity generation for well over a century. Hydroelectricity now supplies 19% of world electricity. Many hydro power plants are operated with Pelton turbines, which is an impulse turbine. The main reasons for using impulse turbines are that they are very simple and relatively cheap. As the stream flow varies, water flow to the turbine can be easily controlled by changing the number of nozzles or by using adjustable nozzles. Scientific investigation and design of turbines saw rapid advancement during last century. Most of the research that had been done on turbines were focused on improving the performance with particular reference to turbine components such as shaft seals, speed increasers and bearings. There is not much information available on effects of blade friction on the performance of turbine. The main focus in this paper is to analyze the performance of Pelton turbine particularly with respect to their blade friction.