• 소음진동
• /
• 제9권2호
• /
• pp.340-347
• /
• 1999

The acoustic performance of reactive type single expansion chamber can be calculated theoretically by plane wave theory. But higher order model should be considered to widen the frequency range. Mode matching method has been developed to consider higher order modes, but very complicated algebra should be used. Munjal suggested a numerical collocation method, which can overcome the shortcomings of mode matching method, using the compatibility conditions for acoustic pressure and particle velocity at the junctions of area discontinuities. But the restriction of Munjal's method is that the ratio between the area of inlet(or outlet) pipe and that of chamber must be natural number. In this paper, the new method was suggested to overcome the shortcomings of Munjal's method. The predictions by this method was also compared with those by the finite element method and Munjal's method in order to demonstrate the accuracy of the modified method presented here.

• 한국기계가공학회지
• /
• 제20권4호
• /
• pp.66-72
• /
• 2021

Since the behavior of an autonomous underwater vehicle (AUV) is influenced by disturbances and moments that are not accurately known, the depth control law of AUVs must have the ability to track the input signal and to reject disturbances simultaneously. Here, we proposed robust tracking control for controlling the depth of an AUV. An augmented closed-loop system is represented by an error dynamic equation, and we can easily show the asymptotic stability of the overall system by using a Lyapunov function. The robust tracking controller is consisted of the internal model of the command signal and a state feedback controller, and it has the ability to track the input signal and reject disturbances. The closed-loop control system is robust to parameter uncertainties. Simulation results showed the control performance of the robust tracking controller to be better than that of a P + PD controller.

• Progress in Superconductivity
• /
• 제7권2호
• /
• pp.135-139
• /
• 2006

We fabricated YBCO coated conductors (CCs) by TFA-MOD process and evaluated microstructure, texture formation, and critical temperature ($T_c$) and current ($I_c$). YBCO precursor solution was synthesized using metal-trifluoroacetates and dip coated on $LaAlO_3$(LAO) substrate. The phase formation and microstructure was characterized by X-ray diffraction and scanning electron microscopy (SEM) and the degree of texture was evaluated by pole-figure analysis. The CC was heat-treated in various calcining temperatures ($370^{\circ}C-460^{\circ}C$) and firing temperatures ($750^{\circ}C-800^{\circ}C$). As fired at $775^{\circ}C$ for 4h, the CC had the highest $T_c$ of 89.5 K and $I_c$ of 40 A/cm-width ($J_c=2.0\;MA/cm^2$). Microstructural observation indicated that the YBCO film was dense and homogeneous and had a strong cube texture without formation of second phase and its in-plane full-width at half-maxima; $5.2^{\circ}$ under optimum condition.

• 자원환경지질
• /
• 제26권4호
• /
• pp.519-539
• /
• 1993

A total of 264 independently oriented core samples were collected from 26 sites in the southwestern part (the Naktong Trough) of the Cretaceous $Ky{\check{o}}ngsang$ Basin in south Korea. The sampled formations comprise the sedimentary Shindong and the Hayang Groups of the Lower Cretaceous age. Alternating field and thermal demagnetizations were conducted. Characteristic remanent magnetization (ChRM) was relatively easily isolated in each formation except in the Chinju formation, from which only remagnetization circles were observed. Even though an extensive use of the fold test was not possible due to the nearly homoclinal nature of the strata in the area, we believe that the ChRM of each formation is of primary origin based on the following grounds: The in-situ ChRM direction of each formation is different from the present geomagnetic field direction. Fisherian precision parameter becomes enhanced through the tilt correction in all formations, closely to the values required for a positive fold test. Three out of the five studied formations pass the reversal test. The mean palaeomagnetic pole position from the studied area is found to be statistically different from the contemporary pole from the Chinese block exclusive of the Shandong area. The difference in magnetic declination suggests a $14.5^{\circ}$ (${\pm}10.5^{\circ}$) clockwise rotation of the studied area relative to the Chinese block comprising the west of the Tan-Lu fault. On the other hand, any significant difference in magnetic inclination and concurrent palaeolatitude is not observed between the studied area and China as well as the other area (Taegu-Andong area) in the $Ky{\check{o}}ngsang$ Basin. The dual nature of the magnetic polarity confirmed in all formations suggests an older than 124 Ma (Neocomian or older) age of the studied sedimentary strata.

• 한국전자파학회논문지
• /
• 제15권7호
• /
• pp.706-712
• /
• 2004

본 논문에서는 Ka대역 위성 중계기용 출력 멀티플렉서의 설계 및 제작에 대하여 언급하였다. 출력 멀티플렉서는 저역통과필터, 채널필터, 매니폴드(Manifold)로 구성되어 있으며, 위성 중계기의 무게와 부피를 최소화하기 위하여 채널필터는 이중모드로 설계하였다. 채널별 주파수 선택도를 높이기 위하여 채널필터는 4차 타원 응답형으로 설계하였으며, 저역통과 필터는 13차 corrugated 형으로 설계하였다. 채널필터와 매니폴드의 초기 설계 후 최적화 과정에 있어서 모든 설계 변수를 최적화시키는 대신 일부의 설계 변수만을 최적화시킴으로써 용이하게 최적화 설계할 수 있음을 확인하였다. 제작한 Ka 대역 위성 중계기용 출력 멀티플렉서의 측정결과는 설계결과와 동일한 특성을 나타내었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.700_701
• /
• 2009

In comparison with conventional motors, Superconducting Homopolar Synchronous Motors (SHSMs) have advantages that it generates high magnetic field by superconducting winding. Therefore, superconducting coil used in SHSM can reduce the motor size and enhance the motor efficiency for high torque applications under the space constraints for propulsion system. During the design process of SHSM, it is required to evaluate the performance of initial design model, that is accurately analyzed using 3D magnetic field modeling large air-gap and flux distribution of axial direction is properly taken into account. In this paper, we analyze magnetic field of a homopolar motor with a 4-pole homopolar rotor and a stator of 3 phase windings. The field analysis is done using 3D finite element analysis which can reflect the end effect and overhang winding. And we extract mutual inductances between a rotor wind and the 3 stator windings. The extracted inductances are used for evaluation of overall motor performances that are calculated with generalized circuit theory of electrical machines.

• 대한기계학회논문집A
• /
• 제24권5호
• /
• pp.1314-1322
• /
• 2000

The acoustic property of reactive type single expansion chamber can be analyzed by traditional plane wave theory. This theory can be applied in low frequency range and has good performance. But this theory can't include higher order modes, therefore another method is essential to analyze acoustic filter in high frequency range. Many researcher suggested the method that can concern higher order modes, and their methods are using mode matching technique. But there is no method that can be applied to the analysis of single expansion chamber with arbitrary inlet/outlet duct position and numbers of higher order modes of inlet/outlet duct and middle chamber. In this paper, the method which can analyze single expansion chamber with arbitrary inlet/outlet duct position and numbers of higher order modes of inlet/outlet duct and middle chamber using fundamental mode matching technique, was suggested and the predictions by this method was compared with those by the finite element method, and the influence of inlet/outlet location to acoustic performance of single expansion chamber is investigated and explained by higher order mode effects.

• 한국안광학회지
• /
• 제7권2호
• /
• pp.181-187
• /
• 2002

수정체는 조절력의 변화에 의해서 곡률이 변화한다. 조절력은 탄성체인 수정체에 힘을 수직으로 주는 경우 정점 방향으로 길이가 늘어난다. 힘을 받는 수정체는 밀도 분포와 형태가 후면에 치우쳐있어, 후면 방향의 수평 힘 보다 전면 방향의 수평 힘이 더 크다. 그러므로 후면 방향 보다 전면 방향의 두께가 더 많아 늘어난다. 그러나 조절력이 일정 값 보다 커지기 시작하면 전면에서는 팽창률이 한계에 도달하다. 이 때 전면 방향의 수평 힘 보다 후면 방향의 수평 힘이 더 커지게 되어, 전면 방향 보다 후면 방향의 두께가 더 많아 늘어난다. 전면과 후면의 두께변화 차이는 조절력에 대해 2차 곡선(${\Delta}=B_1D+B_2D^2$)을 이룬다. 조절력에 따른 전면과 후면의 두께(${\Delta}t_a$, ${\Delta}t_p$) 차이 변화 곡선은 다음과 같이 표현된다. $${\Delta}t_a=t_a-t_{ao}=t_{max}+t_0{\exp}(-A/B)-t_{ao}$$ $${\Delta}t_p=t_p-t_{po}=t_{min}+t_0{\exp}(A/B)-t_{po}$$ 인간의 수정체에서 구한 각각의 Parameter값은 전면에서 $t_{min}=1.1.06$, $t_0=-0.33$, B=9.32, 후면에서 $t_{max}=1.97$, $t_0=0.10$ B=7.96 등을 얻었다. 조절력에 따른 수정체의 전면과 후면에서 정점 곡률 안정의 변화는 다음과 같다. $$R=R_0+R_1{\exp}(D/k)$$ 수정체에서 구한 각각의 Parameter 값은 전면에서 $R_{min}=5.55$, $R_1=6.87$, k=4.65, 후면에서 $R_{max}=-68.6$, $R_1=76.7$, k=308.5 등을 얻었다.

• Nuclear Engineering and Technology
• /
• 제24권1호
• /
• pp.75-85
• /
• 1992

($\alpha$+$\beta$) 영역에서 급냉된 지르칼로이-4 판재 시편에서 집합조직의 변화와 그 조직이 0.2% 항복강도에 미치는 영향에 대하여 조사하였다. ($\alpha$+$\beta$) 입자의 크기가 $\alpha$영역에서 소둔된 시편의 입자 크기보다 약간 클 경우 관찰되는 집합조직은 $\alpha$-소둔된 시편의 것 ((0001) 기저폴은 수직 방향에서 방향으로 30$^{\circ}$기울어져 분포)과 비슷하였다. ($\alpha$+$\beta$) 입자 크기가 $\alpha$ -소둔된 시편의 입자 크기보다 2배 정도로 커지면서 기저폴의 최대치는 수직 방향에서 방향 및 압연 방향으로 약 15$^{\circ}$기울어져 분포하여 집합조직은 등방성을 가졌다. 열처리 시간이 길어질수록 Kearns의 집합조직 변수 f는 압연 방향에서 증가하였고 횡 방향에서는 약간 커졌으며 수직방향에서는 계속 감소하였다. 압연 방향의 f가 조금 증가함에 따라 0.2% 항복강도는 크게 증가하였다. 변형 기구에 따른 Schmid인자와 분해전단응력을 구하여 집합조직이 항복강도에 미치는 영향을 조사하였다. 급격한 항복강도의 증가는 주로 미세조직의 변화에 기인하였으며 집합조직이 미치는 영향은 상대적으로 작았다.

• 한국전자통신학회논문지
• /
• 제16권2호
• /
• pp.385-394
• /
• 2021

본 논문에서는 다층 평면 손실 구조에 대한 반사 전력 및 전송 전력을 계산하기 위해 전자파 전송 행렬식을 새롭게 제안하였다. 적용된 인체 다리는 피부, 지방, 근육 및 뼈의 4층 평면 구조로 모델링하였으며 각 층의 손실을 고려하기 위하여 복소 유전 상수는 4극 Cole-Cole 모델 매개변수를 사용하여 계산하였다. 피부면에 전자파가 입사할 때 0.1 ~ 20.0GHz의 주파수 대역에서 총 반사 및 투과 전력과 인체 손실을 계산하였다. 그리고 다양한 근육 두께에 대해 최외곽 뼈에서 반사되어 피부에서 재방사되는 전력도 계산하였다. 그 결과 근육 두께 3.0mm, 주파수 4.6GHz일 때 반사손실은 -6.13dB로 평균값보다 3.42dB 낮게 나타났다.