• 대한통합의학회지
• /
• 제4권1호
• /
• pp.85-97
• /
• 2016

Purpose : The purpose of this study was to investigate the effects on the muscle thickness and contraction time using sound wave vibrator and swiss ball. Methods : This study was performed on 20 subjects. 20 subjects were divided into two groups; Lumbar stability exercise using sound wave vibrator exercise(n=10)(Group1), Lumbar stability exercise using Swiss ball exercise(n=10)(Group2). Both of the group performed the exercise 3 times a week for 5 weeks. The data was analyzed by the paired t-test to compare before and after difference of factors on each group and the Independent t-test to compare the between groups. Results : Both group were increased muscle contracture time on Straight Leg Rise(SLR) test (p<0.05). It means both group were increased lumbar stability. However, by comparing the between groups, there were no statistically significant difference about muscle thickness of multifidus and transverse abdominal.(p>0.05). Conclusion : As a result of this study, we suggest that the sound wave vibrator may be effective exercise tool for lumbar stability exercise like a swiss ball.

• 한국생산제조학회지
• /
• 제18권5호
• /
• pp.449-454
• /
• 2009

This paper presents an experimental study on the failure characteristics of SnAgCu lead-free solder balls. To estimate the effect of Ag, three types of SnAgCu balls are first prepared by varying the weight percent of Ag(1.0, 3.0, 4.0 wt%) and then analyzed by reliability tests such as thermal shock, high speed ball shear, and drop tests. Thermal shock test reveals that the higher the weight percent of Ag is, the longer the fatigue lift becomes. To the contrary, high speed ball-shear test and drop test show that the shear strength and the fracture toughness of solder balls are inversely proportional to the weight percent of Ag, respectively, Reasons for these observations will be further investigated In the future work.

• 대한통합의학회지
• /
• 제4권2호
• /
• pp.13-22
• /
• 2016

Purpose: The purpose of this study was to determine the effects of the swissball exercise in combination with core muscle in beginner golfer. In general, the swiss ball exercise was related in the core muscle ability. Methods: The experiment was conducted with a total of 10 beginner golfer, and they were dicide into two groups: comparison group(n=5) and experimental group(n=5). In this research, the subjects of the comparison group performed the general matte exercise three times a week, for four weeks. The subjects of the experimental group performed the swiss ball exercise in combination with core muscle three times a week, for four weeks. Use the 7-iron and driver were measured head speed and distance of the comparison group and the experimental group, respectively. The collected data were analyzed by using the paired t-test and ANCOVA Results: The results of this study were as follows: 1) Swiss ball exercise in combination with core muscle revealed the significant improvements after corresponding exercise in golf performance capability. 2) Mat exercise was seen less better than the swiss ball exercises. Conclusion: This results suggested that it was improved the golfer shot performance of beginner proposes to see the Swiss combined movement.

• 대한정형도수물리치료학회지
• /
• 제29권2호
• /
• pp.59-67
• /
• 2023

Background: The purpose of this study is to analyze the effect of shoulder and neck stabilization exercise using a gym ball for healthy women in their 20s with round shoulder and forward head posture, it is intended to try and find improvement for posture. Methods: The subjects of the study were 25 women who understood the purpose of the research and voluntarily agreed to participate in the experiment. They carried out the shoulder and neck stabilization exercise program using a gym ball, which was conducted for 35 minutes, 3 times a week for 4 weeks. The position of the round shoulder and shoulder bones was measured using an tape measurement and were recorded in both at pre, 2 weeks, and post intervention. The craniovertebral angle (CVA) and craniorotational angle (CRA) was measured using an image J. Results: The round shoulder posture left was statistically significantly different within group (p<.05); however, the round shoulder posture right wasn't statistically significantly different (p>.05). As a result of this contrast, test were significant different in both at pre, 2 weeks and post. The scapular position on the left and right were statistically significantly different within the group (p<.05). As a result of the contrast, test were significant different in both at pre, 2 weeks and post (p<.05). The CVA and CRA on the left and right were statistically significantly different within the group (p<.05). As a result of the contrast, test were significant different in both at pre, 2 weeks and post (p<.05). Conclusion: The gym ball exercises improved the posture of women in their 20s. Therefore, gym ball exercises can help improve the quality of life of those with shoulder and neck pain.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.137-142
• /
• 2001

In structural applications, brittle materials such as soda-lime glasses and ceramics are often subjected to multiaxial stress. Brittle materials with crack or damaged by foreign object impacts are abruptly fractured from cracks, because of their properities of very high strength and low fracture toughness. But in most cases, the residual strength has been derived from tests under uniaxial stress such as a 4-point bend test. The strengths under multiaxial stresses might be different from the strength. In comparable tests, the residual strength under biaxial stress state by the ball-on-ring test was greater than that under the uniaxial one by the 4-point bend test. In the case that crack having 90deg. to loading direction, the ratio of biaxial to uniaxial flexure strength was 1.12. At a different crack angle to loading direction when it was evaluated by the 4-point bend test, the residual strength was different and the ratio of 45deg. to 90deg. was 1.16.

• 한국유체기계학회 논문집
• /
• 제19권4호
• /
• pp.39-42
• /
• 2016

A PFA lined ball valve, which is machined with fluorinated resin PFA to its inner part for improving corrosion resistance, non-stickness, heat-resistance, has been widely used to the chemical/pharmaceutical industries, the semiconductor/LCD manufacturing processes, etc. with the high purity chemicals as working fluid. EPA stated that 60% of all fugitive emissions come from the valve stem packing in a typical petroleum or chemical processing plant. They monitor regulated components for leaks and maintain seal performance at acceptable levels. Korean industrial standards only deals with the bubble test for in-line leakage of valves, which has the detectable leak rate of $10^{-4}$ [$mbar{\cdot}L{\cdot}s^{-1}$], therefore, it is not sufficient to check fugitive emissions. In this study, we conducted Helium leak detection from a PFA lined ball valve and evaluated fugitive emissions according to ISO 15848-1, which has the detectable leak rate of $10^{-9}$ [$mbar{\cdot}L{\cdot}s^{-1}$], for manufacturing the high-reliable PFA lined ball valves against fugitive emissions.

• 한국정밀공학회지
• /
• 제18권4호
• /
• pp.151-159
• /
• 2001

As huge energy transfer systems like a nuclear power plant, steam power plant and petrochemical plant are operated for a long time, mechanical properties are changed by degradation. The life time of the systems can be affected by the mechanical properties. BI(Ball Indentation) test has a potential to replace conventional fracture tests like a uniaxial tensile test, fracture toughness test, hardness test and so on. In this paper, we would like to present the ageing evaluation technique by the BI method. The four classes of the thermally aged 1Cr-!mo-0.25V specimens were prepared using an artificially accelerated aging method. Tensile tests, fracture toughness tests, hardness tests and BI tests were performed. The results of the BI tests were in good agreement with fracture characteristics by a standard fracture test method within 5%. The IDE(Indentation Deformation Energy) of a BI technique as a new parameter for evaluating a degradation was suggested and the new IDE parameter clearly depicts the degradation degree.

• Tribology and Lubricants
• /
• 제19권3호
• /
• pp.159-166
• /
• 2003

This research for replacement of chlorine or sulfur based EP(extreme pressure) -additives which is restricted materials by environmental regulation. The subject of this study is as follows, 4-ball test and friction coefficient test were experimented in accordance with temperature and velocity, compounding with several organic or inorganic metallic elements. After 4-ball test, wear area of steel ball was analysed by SEM-EDX. As the analysis, organic and inorganic elements make a effect for extreme pressure lubricity. It is shown that the friction coefficient of lubricant which includes chlorine or sulfur additives, the scoring phenomenon is found accord-ing to temperature and the scuffing phenomenon at 200$^{\circ}C$. Applying to Na, P, S, Zn, Ca based on inorganic and organic elements, the result showed that friction coefficient is decreased more and more, as increasing temperature of lubricant. The additive based on S, Cl, P elements is effect far extreme pressure in the sample#1 and Na, P, S, Zn, Ca in sample #2. These elements are environmental contaminants and S, Cl based on EP additives which are very popular in domestic industry, when they are properly composed with non-chlorine based on additives and Na, P, S, Zn, Ca organic or inorganic elements. It is showed that lubricity and excellent anti-wear properties.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1999년도 제29회 춘계학술대회
• /
• pp.119-126
• /
• 1999

The rolling fatigue lives (RFL) of five kinds of silicon nitride balls were investigated. Four kinds of Si$_3$N$_4$ balls were fabricated using different raw materials, sintering aids and sintering conditions, Commercially available Si3N4 ball was also studied for comparison. All the balls were finished up to the dimensional accuracy of Grade 10 defined in KS B 2001 (Steel Balls for Ball Bearings) with a size of 9.525mm. RFL tests were then conducted under the initial theoretical maximum contact stress 6.38 GPa and the spindle speed 10,000 rpm. Gear oil was provided by oiled race as lubricant. The results of RFL test indicated the prerequisitic conditions for the long rolling life of Si$_3$N$_4$ball : (1) the high density, (2) mjcrostructures consisted of small uniformly distributed grains, (3) little glassy phase in grainboundary, and (4) little crystalline phase and secondary phase that induces residual thermal stress due to the differences of thermal expansion coefficient with Si$_3$N$_4$Phase.

• Tribology and Lubricants
• /
• 제15권2호
• /
• pp.150-155
• /
• 1999

The rolling fatigue lives (RFL) of five kinds of silicon nitride balls were investigated. Four kinds of Si$_3$N$_4$balls were fabricated using different raw materials, sintering aids and sintering conditions. Commercially available Si$_3$N$_4$ball was also studied for comparison. All the balls were finished up to the dimensional accuracy of Grade 10 defined in KS B 2001 (Steel Balls fer Ball Bearings) with a size of 9.525 mm. RFL tests were then conducted under the initial theoretical maximum contact stress 6.38 GPa and the spindle speed 10,000 rpm. Gear oil was provided by oiled race as lubricant. The results of RFL test indicated the prerequisitic conditions for the long rolling life of Si$_3$N$_4$ball : (1) the high density, (2) microstructures consisted of small uniformly distributed grains, (3) little glassy phase in grainboundary, and (4) little crystalline phase and secondary phase that induces residual thermal stress due to the differences of thermal expansion coefficient with Si$_3$N$_4$phase.