• Tuberculosis and Respiratory Diseases
• /
• v.56 no.5
• /
• pp.505-513
• /
• 2004

Background : In lung cancer patients, the presence of metastatic neck nodes is a crucial indicator of inoperabilty. So thorough physical examination of neck is always mandatory, but sometimes those are hardly palpable even by the skillful hand. Ultrasonography is a useful diagnostic method in detection of small impalpable lymph nodes and in guidance of fine needle aspiration biopsy. In this study we evaluated the clinical usefulness of ultrasonography(USG) and ultrasound-guided fine needle aspiration cytology(US-FNA) in lung cancer patients without palpable neck nodes. Methods and Materials : From Sep 2002 to Sep 2003, 36 non-small cell lung cancer patients (20 adenocarcinoma, 16 squamous cell cancer) and 10 small cell lung cancer patients without palpable neck nodes on physical examiation were enrolled. patients who had contralateral mediastinal nodal enlargement(>1cm) on chest CT were excluded. After the routine check of USG on the neck, US-FNA was done in cases with enlarged neck nodes (${\geq}5mm$ in the short axis). The presence of enlarged lymph node on USG, and of malignant cells on cytology were evaluated by the histological type and the patients' clinical stage of lung cancer. Results : Among 36 non-small lung cell cancer patients, 14 (38.8%) had enlarged neck nodes on USG, and 5 of 10 small cell lung carcinoma patients. The mean diameter of the neck nodes was 9.8 mm (range, 7-12 mm). US-FNA of 14 non-small cell lung cancer patients revealed tumor cells in eight patients (57.1%). In 5 small cell lung cancer pateints, tumor cells were found in all cases. By the result of US-FNA, the clinical stage of 8 out of 36 (22.2%) non-small cell lung cancer patients had changed, including two cases of shift from the operable IIIa to the inoperable IIIb. In small cell lung cancer patients their clinical stage was not changed after US-FNA, but their pathological diagnosis was easily done in two cases, in whom endobronchial lesions were not found on bronchoscopy. Conclusions : USG and US-FNA of neck node seem to be safe, sensitive and cost-effective diagnostic tools in the evaluation of lung cancer patients without palpable neck nodes.

• Korean Journal of Agricultural Science
• /
• v.12 no.2
• /
• pp.206-241
• /
• 1985

Attempts to search infection period, infection speed in the tissue of neck blast of rice plant, location of inoculum source and effects of several conditions about the leaf sheath of rice plants for neck blast incidence have been made. 1. The most infectious period for neck blast incidence was the booting stage just before heading date, and most of necks have been infected during the booting stage and on heading date. But $Indica{\times}Japonica$ hybrid varieties had shown always high possibility for infection after booting stage. 2. Incubation period for neck blast of rice plants under natural conditions had rather a long period ranging from 10 to 22 days. Under artificial inoculation condition incubation period in the young panicle was shorter than in the old panicle. Panicles that emerged from the sheath of flag leaf had long incubation period, with a low infection rate and they also shown slow infection speed in the tissue. 3. Considering the incubation period of neck blast of rice plant, we assumed that the most effective application periods of chemicals are 5-10 days for immediate effective chemicals and 10-15 days for slow effective chemicals before heading. 4. Infiltration of conidia into the leaf sheath of rice plant carried out by saturation effect with water through the suture of the upper three leaves. The number of conidia observed in the leaf sheath during the booting stage were higher than those in the leaf sheath during other stages. Ligule had protected to infiltrate of conidia into the leaf sheath. 5. When conidia were infiltrated into the leaf sheath, the highest number of attached conidia was observed on the panicle base and panicle axis with hairs and degenerated panicle, which seemed to promote the infection of neck blast. 6. The lowest spore concentration for neck blast incidence was variable with rice varietal groups. $Indica{\times}Japonica$ hybrid varieties were infected easily compared to the Japonica type varieties, especially. The number of spores for neck blast incidence in $Indica{\times}Japonica$ hybrid varieties was less than 100 and disease index was higher also in $Indica{\times}Japonica$ hybrid than in Japonica type varieties. 7. Nitrogen content and silicate content were related with blast incidence in necks of rice plants in the different growing stage changed during growing period. Nitrogen content increased from booting stage to heading date and then decreased gradually as time passes. Silicate content increased from booting stage after heading with time. Change of these content promoted to increase neck blast infection. 8. Conidia moved to rice plant by ascending and desending dispersal and then attached on the rice plant. Conidia transfered horizontally was found very negligible. So we presumed that infection rate of neck blast was very low after emergence of panicle base from the leaf sheath. Also ascending air current by temperature difference between upper and lower side of rice plant seemed to increase the liberation of spores. 9. Conidial number of the blast fungus collected just before and after heading date was closely related with neck blast incidence. Lesions on three leaves from the top were closely related with neck blast incidence, because they had high potential for conidia formation of rice blast fungus and they were direct inoculum sources for neck blast. 10. The condition inside the leaf sheath was very favorable for the incidence of neck blast and the neck blast incidence in the leaf sheath increased as the level of fertilizer applied increased. Therefore, the infection rate of neck blast on the all panicle parts such as panicle base, panicle branches, spikelets, nodes, and internodes inside the leaf sheath didn't show differences due to varietal resistance or fertilizers applied. 11. Except for others among dominant species of fungi in the leaf sheath, only Gerlachia oryzae appeared to promote incidence of neck blast. It was assumed that days for heading of varieties were related with neck blast incidence.

• Journal of The Korean Astronomical Society
• /
• v.51 no.1
• /
• pp.17-25
• /
• 2018

Detecting exoplanets around giant stars sheds light on the later-stage evolution of planetary systems. We observed the M giant HD 18438 and the K giant HD 158996 as part of a Search for Exoplanets around Northern circumpolar Stars (SENS) and obtained 38 and 24 spectra from 2010 to 2017 using the high-resolution Bohyunsan Observatory Echelle Spectrograph (BOES) at the 1.8m telescope of Bohyunsan Optical Astronomy Observatory in Korea. We obtained precise RV measurements from the spectra and found long-period radial velocity (RV) variations with period 719.0 days for HD 18438 and 820.2 days for HD 158996. We checked the chromospheric activities using Ca $\text\tiny{II}$ H and $H{\alpha}$ lines, HIPPARCOS photometry and line bisectors to identify the origin of the observed RV variations. In the case of HD 18438, we conclude that the observed RV variations with period 719.0 days are likely to be caused by the pulsations because the periods of HIPPARCOS photometric and $H{\alpha}$ EW variations for HD 18438 are similar to that of RV variations in Lomb-Scargle periodogram, and there are no correlations between bisectors and RV measurements. In the case of HD 158996, on the other hand, we did not find any similarity in the respective periodograms nor any correlation between RV variations and line bisector variations. In addition, the probability that the real rotational period can be as longer than the RV period for HD 158996 is only about 4.3%. Thus we conclude that observed RV variations with a period of 820.2 days of HD 158996 are caused by a planetary companion, which has the minimum mass of 14.0 $M_{Jup}$, the semi-major axis of 2.1 AU, and eccentricity of 0.13 assuming the stellar mass of $1.8 M_{\odot}$. HD 158996 is so far one of the brightest and largest stars to harbor an exoplanet candidate.

• The Korean Journal of Pain
• /
• v.12 no.1
• /
• pp.27-35
• /
• 1999

Background: Fibromyalgia is a common syndrome of musculoskeletal pain and fatigue. Lacking distinctive histological or laboratory abnormality in diagnosis, it has often been considered a form of "psychogenic rheumatism". Fibromyalgia causes much distress to the affected patients and often frustrates physicians, who are unable to start rational therapy on any logical disease pathology. Methods: Growth hormone is essential for muscular homeostasis. In the present study, the notion that the stage-4 sleep anomaly typically seen in the fibromyalgia syndrome may disrupt growth hormone secretion was tested. Because growth hormone has a very short half-life, serum levels of somatomedin C were measured; somatomedin C is the major mediator of growth hormone's anabolic actions and is a prerequisite for normal muscle homeostasis. Serum levels of somatomedin C using acid-extraction procedure and two-site immunoradiome-tric assay (IRMA) and number of tender points were measured in 27 female patients with fibromyalgia from 40 to 60 years old and 27 healthy controls. Results: There were no differences in the concentration of somatomedin C between fibromyalgia patients and controls ($mean{\pm}SD$: $178.3{\pm}75.5$ ng/ml versus $166.3{\pm}76.6$ ng/ml; p=0.55). And there were no correlations between number of tender point and serum somatomedin C level by linear regression analysis. Conclusions: These findings did not support that there is a distinctive disruption of the growth hormone-somatomedin C neuroendocrine axis in a fibromyalgia syndrome. But we can not discard the hypothesis that disturbed sleep predispose to muscle pain.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.1
• /
• pp.147-157
• /
• 2018

The basis of capacity design has been explicitly or implicitly regulated in most bridge design specifications. It is to guarantee ductile failure of entire bridge system by preventing brittle failure of pier members and any other structural members until the columns provides fully enough plastic rotation capacity. Brittle shear is regarded as a mode of failure that should be avoided in reinforced concrete bridge pier design. To provide ductility behavior of column, the one of important factors is that flexural hinge of column must be detailed to ensure adequate and dependable shear strength and deformation capacity. Eight small scale circular reinforced concrete columns were tested under cyclic lateral load with 4.5 aspect ratio. The test variables are longitudinal steel ratio, transverse steel ratio, and axial load ratio. Eight flexurally dominated columns were tested. In all specimens, initial flexural-shear cracks occurred at 1.5% drift ratio. The multiple flexural-shear crack width and length gradually increased until the final stage. The angles of the major inclined cracks measured from the vertical column axis ranged between 42 and 48 degrees. In particular, this study focused on assessing transverse reinforcement contribution to the column shear strength. Transverse reinforcement contribution measured during test. Each three components of transverse reinforcement contribution, axial force contribution and concrete contribution were investigated and compared. It was assessed that the concrete stresses of all specimen were larger than stress limit of Korea Bridge Design Specifications.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.4
• /
• pp.670-674
• /
• 2005

Supernumerary tooth develops as a result of abnormal proliferation of the dental lamina during the initiation stage of dental development. It could be a sporadic occurrence or a hereditary transmission. Supernumerary tooth occurs with a frequency of 1 to 3%. Generally, there is a 2:1 preference for boys. It is usually found in the anterior portion of the maxilla and may be associated with complications such as impaction, malposition of permanent teeth, formation of diastema, cysts and eruption into nasal cavity, The position of supernumerary tooth found in the anterior portion of the maxilla is determined by the axis of the tooth. One third of supernumerary tooth in the anterior portion of the maxilla has no possibility of eruption due to its invertedly impacted position. However, as long as the coronal part of the follicle remains intact, migration of supernumerary tooth is possible. The migration may occur into the palate, the premolar region, the sinus or the nasal cavity. Also, growth of vertical dimension of maxilla could make surgical approach difficult as time goes by For this reason, we have found invertedly impacted mesiodens moved to the vault of the palate in the two cases, and extracted supernumerary tooth surgically.

• The Journal of Engineering Geology
• /
• v.12 no.4
• /
• pp.405-419
• /
• 2002

Fracture roughness of rock specimens is observed by a new confocal laser scanning microscope (CLSM; Olympus OLS1100). The wave length of laser is 488 nm, and the laser scanning is managed by a light polarization method using two galvano-meter scanner mirrors. The function of laser reflection auto-focusing enables us to measure line data fast and precisely. The system improves resolution in the light axis (namely z) direction because of the confocal optics. Using the CLSM, it is Possible to measure a specimen of the size up to $10{\;}{\times}{\;}10{\;}cm$ which is fixed on a specially designed stage. A sampling is managed in a spacing $2.5{\;}\mu\textrm{m}$ along x and y directions. The highest measurement resolution of z direction is $10{\;}\mu\textrm{m}$, which is more accurate than other methods. Core specimens of coarse and fine grained granite are provided. Fractures are artificially maneuvered by a Brazilian test method. Measurements are performed along three scan lines on each fracture surface. The measured data are represented as 2-D and 3-D digital images showing detailed features of roughness. Line profiles of the coarse granites represent more frequent change of undulation than those of the fine granite. Spectral analyses by the fast Fourier transform (FFT) are performed to characterize the roughness data quantitatively and to identify influential frequency of roughness. The FFT results suggest that a specimen loaded by large and low frequency energy tends to have high values of undulation change and large wave length of fracture roughness.

• Journal of architectural history
• /
• v.28 no.2
• /
• pp.77-90
• /
• 2019

The Sacheonwangsa temple in Silla was completed in 679, just after the unification of the Three Kingdoms. In recent years, we have been critically considering the history of the chronology based on the existence of 'Geumdang of the previous generation', which has emerged through the research report of the Sacheonwangsa temple. It is the one to reconsider the construction process of the Sacheonwangsa temple centering on the re-interpretation of the construction time and the character of the first stage of the foundation which was confirmed from within the Geumdang site. The results of this study are as follows : 1)The "Chang(創) of Sacheonwangsa temple" in [Three Affairs that Queen Seondeok had already known] that it is presumed that the construction of the Sacheonwangsa temple, which was designed by Anham before 640 years ago, will convey the fact that the first of the King Munmu's reign (661 ~) has been finalized after the initial discussion. 2)Although the theories after excavations are predicated on the existence of 'Geumdang of the previous generation', there is no reason to believe that a lasting predecessor building with roof and pillar walls on predecessor buildings is considered to have been built. The foundation was associated with the "build a temple out of coloured silk(以彩帛營寺)" i.e. 'Jochang(祖創)' in 670 years before the construction plan was formally finalized. However, it is presumed that the remains of the platform construction on the premise that it will be used on the construction of Geumdang. 3)The decision to 'rebuilding( ??)' based on a formal construction plan is determined to be from 670 to 672 years. The maintaining of the original cathedral axis line, to the north on the boundary of the southern limit of the foundation flat portion, the result of developing and embodied the relative position of the Geumdang in the newly determined cathedral unfold and embody, the center of the building base and Geumdang, it is presumed that the centers of them are divided into North and south. 4)The completion of the Sacheonwangsa temple in 679 is understood as the conclusion of 'rebuilding' to "build a temple out of coloured silk" i.e. 'Jochang' in 670 years. The pent roof of the Geumdang was initially considered not to be in the plan, but it is judged to be before the completion of the Sacheonwangsa temple.

• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.3
• /
• pp.224-231
• /
• 2010

Purpose: This study was to investigate how the crestal module design could affect the level of marginal bone stress around dental implant. Materials and methods: A submerged implant of 4.1 mm in diameter and 10 mm in length was selected as baseline model (Dentis Co., Daegu,Korea).A total of 5 experimental implants of different crestal modules were designed (Type I model : with microthread at the cervical 3 mm, Type II model : the same thread pattern as Type I but with a trans-gingival module, Type III model: the same thread pattern as the control model but with a trans-gingival module, Type IV model: one piece system with concave transgingival part, Type V model: equipped with beveled platform). Stress analysis was conducted with the use of axisy mmetric finite element modeling scheme. A force of 100 N was applied at 30 degrees from the implant axis. Results: Stress analysis has shown no stress concentration around the marginal bone for the control model. As compared to the control model, the stress levels of 0.2 mm areas away from the recorded implant were slightly lower in Type I and Type IV models, but higher in Type II, Type III and Type V models. As compared to 15.09 MPa around for the control model, the stress levels were 14.78 MPa, 18.39 MPa, 21.11 MPa, 14.63 MPa, 17.88 MPa in the cases of Type I, II, III, IV and V models. Conclusion: From these results, the conclusion was drawn that the microthread and the concavity with either crestal or trans-gingival modules maybe used in standard size dental implants to reduce marginal bone stress.

• Journal of Aquaculture
• /
• v.4 no.1
• /
• pp.31-66
• /
• 1991

This paper deals with the reproductive ecology e.g., number of the pre-spawning moults, morphological characteristics of the pre-spawning moult the common moult, daily ration druing a molting cycle mating behavior, structures of spermatozoa and spermatophore, structure of vas deferens, mechanisms of the oviposition and brooding into the egg-chambers, a suitable time for the artificial mating and fertilization, time sequence of the oviposition and brooding into egg-chambers from the copulation, responses to temperature and chlorinity on the egg development and hatching, effect of temperatures on duration of egg development, physical mechanism of the egg hatching, to make an attempt for the artificial spawning and brooding to establish a suitable system of the artificial seedling-production for the aquaculture. 1. Females molted commonly $8{\~}10$ times at an interval of $17{\~}18$ days at $28^{\circ}C,\;3.26\~4.35\%_{\circ}$ while the prespawning moltings were $4{\~}5$ times at an interval of $13{\~}14$ days. The suitable state for artificial copulation was within 14 hours elapsed from the prespawning moltings (most suitable state was within 8 hours). Males discharged a gelatinous spermatophore and placed it on the females sternum during copulation. Oviposition was seen $6{\~}17$ hours after copulation. External fertilization was considered to take place at oviposition. Fertilized eggs held in egg-chambers forming between pleopods were about $5000{\~}6000$ in females those sizes about 6.5 cm in body length. 2. Eggs immediately after oviposition were elliptic shape, measuring $0.58{\times}0.48$ mm up to hatching. Their sizes increased with egg development and finally reached $0.85{\times}0.54$ mm up to hatching. The relationship between the long axis of the egg(Y in U) and days elapsed(X) was expressed as Y= 5.60194 + 0.007358X. The eggs performed superficial cleavage and their cleavage furrows became visible at the 4-daughter-nucleus stage. The eggs showed normal development up to hatching at water temperature range of $22{\~}30^{\circ}C$ (optimum temperature : $26{\~}28^{\circ}C$) and at chlorinity range of $0.00\~6.64\%_{\circ}$ (optimun chlorinity : $2.21{\%}_{\circ}$). The relationship between incubation period (Y in days) and water temperature(X in $^{\circ}C$) could be expressed as Y= 50.803-1.3555X. The eggs hatched $12{\~}13$ days after oviposition at $28.0{\~}28.6^{\circ}C$ 3. The pre-spawning moltings were appreciably different in the morphologic structure from those of common moltings. Breeding setae and dresses were formed on the thoracic regions, abdominal epimerae and the bases of the first to fourth pleopods in order to prepare and support oviposition, transfering and supporting eggs in egg-chambers up to hatching. These supplementary breeding organs were observed only at reproductive seasons.