• 한국농공학회논문집
• /
• 제56권3호
• /
• pp.47-53
• /
• 2014

We investigated the effect of straw mat cover and soil amendments on the reduction of runoff, non-point source pollution load and yield of a Chinese cabbage from alpine fields. Two plots on sandy loam soil were prepared. Experimental treatments were control and rice straw mat cover (3,300 kg/ha)+Polyacrylamide (PAM) (5 kg/ha)+Gypsum (1 ton/ha) (SPG). A variety of Chinese cabbage was cultivated and runoff was monitored during a growing season in 2012. Monitoring was conducted to seven times. Runoff rate of SPG plot was lower than those of control plot. The reduction rate of runoff from SPG plot was 29.4 % compared to control plot. The reduction rate of suspended solids (SS), total nitrogen (TN) and total phosphorus (TP) load of SPG plot was 86.5 %, 34.7 % and 39.1 %, respectively. Yield of a Chinese cabbage from SPG plot (39,646 kg/ha) was greater than that of control plots (28,482 kg/ha). It was concluded that the use of SPG on soil surface could not only reduce the NPS pollution loads in receiving waters but also help increase the crop yield.

• Journal of Nutrition and Health
• /
• 제30권9호
• /
• pp.1073-1083
• /
• 1997

This project was to compare the effects of consuming diets incorporating soybean oil , canola oil, ad palm oil on blood serum lipid patterns and fecal fat excretion in healthy human adults. The project was composed of three studies that were run concurrently . Each study was composed of a 4-day pre-trial period and two , 14-day experimental periods arranged according to a cross-over design. During the pre trial period, subjects were allowed to eat self-selected diets. During the experimental period , subjects were asked to eat constant, laboratory controlled diets in which sources of dietary fat varied . Thirty healthy , young adult subjects were fed a laboratory controlled diet incorporating soybean oil, canola oil, and palm oil. Test oils provided approximately 20% of the total dietary calories form all sources. Total dietary fat from all sources was approximately 30% of consumed calories. The highest serum total cholesterol , LDL cholesterol, VLDL cholesterol , and triglyceride values occurred when pam oil diets were eaten. However, feeding on palm oil diets resulted in the same HDL cholesterol content as with soybean oil or canola oil diets. Soybean oil diets produced numerically lower blood serum total cholesterol , LDL cholesterol, and triglycerides, and numerically higher HDL cholesterol and VLDL cholesterol than did those with canola oil. Fecal fat excretion was numerically lower with soybean oil diets than with canola diets. The highest fecal fat excretion occurred when palm oil diets were eaten.

• 한국정밀공학회지
• /
• 제26권4호
• /
• pp.82-90
• /
• 2009

Pneumatic cylinder is one of the low cost actuation sources which have been applied in industrial and prosthetic application since it has a high power/weight ratio, a high-tension force and a long durability However, the control problems of pneumatic systems, oscillatory motion and compliance, have prevented their widespread use in advanced robotics. To overcome these shortcomings, a number of newer pneumatic actuators have been developed such as McKibben Muscle, Rubber Actuator and Pneumatic Artificial Muscle (PAM) Manipulators. In this paper, one solution for position control of a robot arm, which is driven by two pneumatic artificial muscles, is presented. However, some limitations still exist, such as a deterioration of the performance of transient response due to the changes in the external load of the robot arm. To overcome this problem, a switching algorithm of the control parameter using a learning vector quantization neural network (LVQNN) is proposed in this paper. This estimates the external load of the pneumatic artificial muscle manipulator. The effectiveness of the proposed control algorithm is demonstrated through experiments with different external working loads.

• 펄프종이기술
• /
• 제35권2호
• /
• pp.58-64
• /
• 2003

Because of its tendency of making strong Hoc on the fiber surface with fines, Meogujaengi has not been valued as a material of Hanji. As an attempt to manufacture high value-added products using the material made from Jumchihanji, this study performed morphological classification and chemical component analysis and selection of pulping of Meogujaengi method. As a result, it can be concluded as follows, 1. Meogujaengi is assumed to be a local variety of Broussonetia karinoki and its outward appearance is distinguished from Broussonetia kazinoki. 2. The bast fiber of Meogujaengi is longer and thinner than that of Broussonetia papyrifera or Broussonetia kazinoki. However, because of the coarse linear of fiber tissue, there are many clusters. 3. The cluster phenomenon of Meogujaengi is nothing to do with its chemical components. Although the contents of its chemical components are different from those of Broussonetia kazinoki, no component was found that obstructs pulping. 4. The pretreatment for suppressing the occurrence of clusters of Meogujaengi was effective, and it was necessary to do secondary beating using hollander beater after beating mixed with PAM using knife beater.

• 한국식품영양과학회지
• /
• 제29권1호
• /
• pp.85-92
• /
• 2000

This study was carried out to storage of Pleurotus ostreatus packed in various trays made by different matrials-expanded polystyrene (EPS), rice straw pulp(RP), and RP trays coated with starch, carboxyl methyl cellulose (CMC), polyacrylamide (PAM), alkylketen dimer (AKD), rosin size (RS) and polyethylene glycol (PEG) at 8~1$0^{\circ}C$ and 70~80% relative hymidity for 6 days. At 6 days storage, weight increase of RP and CMC tray was lower (p<0.05) than those of others and the weight of oyster mushroom packed in RP, CMC and AKD tray decreased lower(p<0.05) than those of others. Carbon dioxide contents in trays were increased from 0.5% to 5.5%~8.6% within 1 day storage. Oxygen contents in trays were sharply decreased from 20% to 0.8%~8.2% within 1 day storage. Lightness of oyster mushroom increased all trays. Off flavor appeared stronly in oyster mushroom packed in EPS, AKD and PEG during storage, but was not detected in mushroom packed in starch and CMC until 4 days storage.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2000년도 추계학술발표논문집 (하)
• /
• pp.1433-1436
• /
• 2000

클러스터링에 있어서 k-means[7], DBSCAN[2], CURE[4], ROCK[5], PAM[8], 같은 기존의 알고리즘은 원형이나 타원형 등의 어느 고정된 모양에 의해 클러스터를 결정한다. 만약 클러스터 하려는 데이터의 분포가 우연히 알고리즘의 결정된 모양과 일치하면 정확한 해를 얻을 수 있다. 하지만 자연적인 데이터의 분포에서는 발생하기 어렵다. 데이터의 형태를 추적하여 이러한 문제점을 해결한 CHAMELEON[1] 알고리즘이 최근에 발표되었다. 하지만 모양에는 독립적이나 데이터의 양이 증가함에 따라 소요되는 시간이 폭발적으로 증가한다. 이것은 기존의 마이닝 데이터들이 대용량이라는 것을 고려하면 현실에 적용하기 힘든 문제점이 있다. 이러한 문제점을 해결하기 위해 본 논문에서는 K-means[7]]를 이용한 대표를 선출하는 방법으로 CHAMELEON[1]의 문제점 개선(EF-CHAMELEON)을 시도하였으며 여러 자연적인 형태의 도형들은 아주 작은 원형들의 집합으로 구성 될 수 있다는 생각을 기본으로 잡음에 영향을 받지 않을 정도로 아주 작은 초기 다수의 소형 클러스터를 K-mean을 이용하여 구성하고 이를 다시 크러스터간의 상대적인 거리를 이용하여 다시 머지 하는 방법으로 모양에 의존적인 문제를 해결하며 비교사 학습(unsupervised learning)에 충실하기 위해 임계값을 적용 적정 단계에서 알고리즘을 멈추게 한 ADF 알고리즘을 소개한다. 실험 데이터는 기존의 여러 클러스터링 알고리즘이 판별 할 수 없었던 다양한 모양을 가지고있는 2차원 배열을 사용하여 ADF. CHAMELEON[1], EF-CHAMELEON,의 성능을 비교하였다.

• International Journal of Automotive Technology
• /
• 제8권2호
• /
• pp.193-201
• /
• 2007

The present paper deals with the application of the explicit finite element code, PAM-CRASH, to simulate the crash behavior of steel thin-walled tubes with various cross-sections subjected to axial loading. An isotropic elastic, linear strain-hardening material model was used in the finite element analysis and the strain-rate sensitivity of mild steel was modeled by using the Cowper-Symonds constitutive equation with modified coefficients. The modified coefficients were applied in numerical collapse simulations of 11 types of thin-walled polygon tubes: 7 convex polygon tubes and 4 concave polygon tubes. The results show that the thin hexagonal tube and the thick octagonal tube showed relatively good performance within the convex polygon tubes. The crush strengths of the hexagonal and octagonal tubes increased by about 20% and 25% from the crush strength of the square tube, respectively. Among the concave tubes, the I-type tube showed the best performance. Its crush strength was about 50% higher than the crush strength of the square tube.

• 펄프종이기술
• /
• 제46권5호
• /
• pp.51-60
• /
• 2014

To find a practical application approach of polyelectrolyte multilayering (PEM) on inorganic filler, we introduced PEM process without washing step and investigated the effect of shear condition on the washless PEM treatment of ground calcium carbonate (GCC). Washless multilayering on GCC was conducted under various shear conditions such as stirring, homogenization, and ultrasonication. Highly charged polyelectrolytes combination of polydiallyldimethylammonium chloride (PDADMAC) and poly sodium 4-styrene sulfonate (PSS) and low charged polyelectrolytes combination with cationic starch and anionic polyacrylamide (PAM) were compared. In the case of highly charged polyelectrolytes combination, shear conditions did not affect the zeta potential and the particle size of treated GCC. However, the modified GCC particles with low charged polyelectrolytes were more dispersed under higher shear condition while maintaining the zeta potential. In addition, GCC was successfully modified through laboratory inline washless polyelectrolyte multilayering system which consists of homogenizers and pumps.

• 한국재료학회지
• /
• 제15권8호
• /
• pp.543-547
• /
• 2005

Organic electroluminescence devices were made from 1,4-bis-(9-anthrylvinyl)benzene (AVB) and 1,4-bis-(9-aminoanthryl)benzene (AAB) anthracene derivatives. Device structure was ITO/AVB/PANI(EB)/Al (multi-layer device) and ITO/AAB:DCM/Al(single-layer device). In these devices, AVB, polyaniline(emeraldine base) (PANI(EB)) and AAB were used as the emitting material. 4-(dicyanomethylene)-2-methyl-6-p-(dimethylamino)styryl-4H -pyran(DCM) was used as red fluorescent dopant. We studied change of fluorescence wavelength with concentration of DCM doped in AAB. The ionization potential (IP) and optical band gap (Eg) were measured by cyclic voltammetry and UV-visible spectrum. We compared with difference of emitting wavelength between photoluminescence and electroluminescence spectrum. In case of the multi-layer device, PANI and AVB EL spectra have similar wave pattern to each PL spectrum and when PAM and AVB were used at the same time, and multi-layer device showed that a balanced recombination and radiation kom PANI and AVB. In case of the single-layer device, with the increase of DCM concentration, the blue emission decreases and red emission increases. This indicates that DCM was excited by the energy transfer from AAB to DCM or the direct recombination at the dopant sites due to carrier trapping, or both. The device with $1.0wt\%$ DCM concentration gave white light.

• 전기화학회지
• /
• 제3권3호
• /
• pp.169-172
• /
• 2000

Polyacrylonitrile (PAN) 고분자의 유기용매 함유능을 증대시키기 위하여 PAN을 수정한 새로운 polyacrylonitrile-co-bis[2-(2-methoxyethoxy)ethyl]itaconate (PANI로 약칭) 공중합체를 합성하였다. PAN과 PANI의 혼합 고분자에 ethylene carbonate (EC)와 dimethyl carbonate (DMC)의 혼합유기용매, $LiClO_4$ 염을 혼합한 젤 고분자 전해질을 제조하였다. 상온에서의 이온전도도는 25PAN +10PANl +50EC/DMC+$15LiClO_4$ 조성의 전해질에서 $2\times10^{-3}\; Scm^{-1}$로 가장 높은 값을 나타내었다. 이는 PANI의 혼합으로 인하여 유기용매 영역의 결정질 성분이 줄어들고, 따라서 전하운반자의 수가 증가하기 때문인 것으로 분석하였다. PANI를 고분자 기질로 적당량 첨가하면, PAN만을 단용으로 사용한 젤-전해질에 비해 기계적 강도가 감소하는 단점이 있기는 하지만, 이온전도성, 열적 특성, 용매와의 혼화성, 전기화학적 안정성, 리튬 전극과의 계면 안정성 등 거의 모든 면에서 성능이 개선되는 것으로 나타났다.