• Title/Summary/Keyword: 4-DAT

Search Result 216, Processing Time 0.031 seconds

Adsorption and Metabolism of [14C]butachlor in Rice Plants Under Pot Cultivation ([14C]Butachlor의 벼에 대한 흡수 및 대사)

  • Kim, Ju-Hye;Kim, Jong-Hwan;Kim, Dae-Wook;Lee, Bong-Jae;Kim, Chansub;Ihm, Yangbin;Seo, Jong-Su
    • The Korean Journal of Pesticide Science
    • /
    • v.19 no.3
    • /
    • pp.174-184
    • /
    • 2015
  • In the present study, the metabolism of [$^{14}C$]butachlor was investigated in rice plant according to the OECD test guideline No. 501. [$^{14}C$]Butachlor was treated as granule to paddy water by application of 1.5 kg ingredient (a.i.)/ha at the 3~4 leave stage of rice plant. At 85 days after treatment (DAT), samples of panicle, foliage, and roots were taken for radioactivity analysis. Upon harvest at 126 DAT, rice plants were separated into brown rice, husk, straw, and root parts. Amounts of total radioactivity absorbed by rice plant ranged from 8.6 to 9.8% of applied radioactivity (AR). Total radioactive residues (TRRs) of rice plant at 126 DAT was the highest as 4.0421 mg/kg (7.3% AR) in the straw followed by 1.4595 mg/kg (2.4% AR) in the root, 0.7257 mg/kg (0.1% AR) in the husk. The lowest level recording 0.1020 mg/kg (0.1% AR) was found in brown rice. Each part was extracted with various solvents and solvent/water mixtures. Greater than 70% of TRRs was readily extractable from foliage, panicle, husk and straw. Only 34.0% of the brown rice and 43% of root based on TRRs were extractable showing that the residues were completely assimilated in the plant tissue. The level of non-extractable radioactivity was ranged from 26.2 to 66.0% of TRRs. From this study, five tentative major metabolites (M1, M2, M3, M4 and M5) were observed in rice extracts. Among the metabolites, 2,6-diethylaniline assigned as M4 was identified in rice plant by comparing to retention time of reference standard. Un-metabolized butachlor was not detected in any fractions. In soil extracts, N-(butoxymethyl)-N-(2,6-diethyl phenyl)acetamide, 2,6-diethylaniline, M2, M3 and M5 were observed. And the concentration of butachlor was low level (ca. 0.03 mg/kg).

Effects of Seed Soaking of Kinetin on Alleviating Copper Toxicity during Germination in Rice (Kinetin 침종처리가 벼 발아중 구리 독성 경감에 미치는 영향)

  • 김상국;이상철;민기군;이승필;최부술
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.41 no.4
    • /
    • pp.465-474
    • /
    • 1996
  • The study was carried out to determine the proper concentration of plant growth regulator, kinetin on alleviating copper toxicity for two rice cultivars of seed germination. The results were as followings : Soaking treatment of kinetin 10$^{-3}$ M increased the germination rate of both cultivars, Ilpumbyeo and Hyangmibyeo 1 by 92% and 88% as compared with copper treatment (60ppm). But the soaking treatment effect of plant growth regulator, kinetin was not recognized at the kinetin 10$^{-4}$ M and 10$^{-5}$ M. Chlorophyll content of both rices was higher than that of Hyangmibyeo 1. Copper content of Ilpumbyeo was higher in leaf than in seed part. At the 3 days after treatment of copper 60ppm, both cultivars of treatment of kinetin 1O-3M showed the somewhat thin bands at the 35 and 40kDa compared with others. A new protein band pattern was only appeared to kinetin 1O-3M at approximately 54.4kDa(M. W) at the 7 days after treatment of copper 60ppm in llpumbyeo cultivar, SOD activity of copper 60ppm treatment increased in 3DAT, but there were no significant differences in 5 and 7DAT of two cultivars. Free proline contents of copper 60ppm treatment in llpumbyeo were remarkably increased about 4.996$\mu$M. In particular, free proline content of kinetin l0$^{-3}$ M in Ilpumbyeo was 5.008$\mu$M in 3DAT. In case of Hwangmibyeo 1, free proline content of copper 60ppm was 5.825$\mu$M compared with an untreated control showing 2.34l$\mu$M. The effects of kinetin treatment were recognized to promote the root growth and germination rate under copper toxicity(60ppm) condition in both cultivars.

  • PDF

Comparisons in Volumes of Irrigation and Drainage, Plant Growth and Fruit Yield under FDR Sensor-, Integrated Solar Radiation-, and Timer-Automated Irrigation Systems for Production of Tomato in a Coir Substrate Hydroponic System (토마토 코이어 수경재배에서 FDR센서, 적산일사량센서 및 타이머 급액방식에 따른 급배액량, 생육 및 과실수량 비교)

  • Choi, Eun-Young;Kim, Hee-Yong;Choi, Ki-Young;Lee, Yong-Beom
    • Journal of Bio-Environment Control
    • /
    • v.25 no.1
    • /
    • pp.63-70
    • /
    • 2016
  • Water drainage from the open hydroponics often causes significant environmental pollution due to agrochemicals and loss of water and nutrients. The objectives of this study were to show the potential application of an irrigation schedule based on threshold values of volumetric substrate water content for tomato (Solanum lycopersicum L. 'Samsamgu') cultivation in a commercial hydroponic farm during spring to summer cultivation. This study was performed for minimizing effluent from coir substrate hydroponics using a frequency domain reflectometry (FDR) sensor-automated irrigation, as compared with an integrated solar-radiation (IR) and conventional timer-irrigation (TIMER) after transplanting. In results, no significant difference in daily irrigation volume was found among the treatments until 88 days after transplant (DAT). However, during the 88 to 107 DAT, the daily irrigation volume was in the order of IR (2125 mL) > TIMER (2063 mL) > FDR (1983 mL), and during the 108 to 120 DAT, it was in the order of IR (2000 mL) > TIMER (1664 mL) > FDR (1500 mL). The lowest drainage volume was observed in the FDR treatment with the order of IR (12~19%) > TIMER (4~12%) > FDR (0~7%) during the entire growing period. A lower irrigation volume in the FDR treatment after 88 DAT may be due to the sensor's detecting capacity for less water absorption by plant after completing fruit maturity with apical pruning and removal of lower leaves, while a higher irrigation volume in the IR treatment may be due to gradual increase in integrated solar-radiation amount as closer to summer season. There was no significant difference in plant growth and fruit yield among the treatments; however, a 11% and 18% of higher soluble sugar content was observed in the FDR than that of TIMER and IR treatment. respectively.

Development of Models for Estimating Growth of Quinoa (Chenopodium quinoa Willd.) in a Closed-Type Plant Factory System (완전제어형 식물공장에서 퀴노아 (Chenopodium quinoa Willd.)의 생장을 예측하기 위한 모델 개발)

  • Austin, Jirapa;Cho, Young-Yeol
    • Journal of Bio-Environment Control
    • /
    • v.27 no.4
    • /
    • pp.326-331
    • /
    • 2018
  • Crop growth models are useful tools for understanding and integrating knowledge about crop growth. Models for predicting plant height, net photosynthesis rate, and plant growth of quinoa (Chenopodium quinoa Willd.) as a leafy vegetable in a closed-type plant factory system were developed using empirical model equations such as linear, quadratic, non-rectangular hyperbola, and expolinear equations. Plant growth and yield were measured at 5-day intervals after transplanting. Photosynthesis and growth curve models were calculated. Linear and curve relationships were obtained between plant heights and days after transplanting (DAT), however, accuracy of the equation to estimate plant height was linear equation. A non-rectangular hyperbola model was chosen as the response function of net photosynthesis. The light compensation point, light saturation point, and respiration rate were 29, 813 and $3.4{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, respectively. The shoot fresh weight showed a linear relationship with the shoot dry weight. The regression coefficient of the shoot dry weight was 0.75 ($R^2=0.921^{***}$). A non-linear regression was carried out to describe the increase in shoot dry weight of quinoa as a function of time using an expolinear equation. The crop growth rate and relative growth rate were $22.9g{\cdot}m^{-2}{\cdot}d^{-1}$ and $0.28g{\cdot}g^{-1}{\cdot}d^{-1}$, respectively. These models can accurately estimate plant height, net photosynthesis rate, shoot fresh weight, and shoot dry weight of quinoa.

Differential Sensitivity of Rice Cultivars to HPPD-Inhibiting Herbicides and their Influences on Rice Yield (HPPD 억제 제초제에 대한 벼 생태형간 약해 차이 및 수량 영향)

  • Kim, Sang-Yeol;Oh, Seong-Hwan;Lee, Ji-Yoon;Yeo, Un-Sang;Lee, Jong-Hee;Cho, Jun-Hyeon;Song, You-Chun;Oh, Myung-Kyu;Han, Sang-Ik;Seo, Woo-Duck;Jang, Ki-Chang;Na, Ji-Eun;Park, Sung-Tae;Nam, Min-Hee
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.57 no.2
    • /
    • pp.160-165
    • /
    • 2012
  • A field study was conducted at Miryang in 2011 to evaluate differential sensitivity of six rice cultivars, three Indica${\times}$Japonica rice (long grain, cv. Hanareumbyeo, Hanareum2, Dasanbyeo) and three Japonica rice (short grain, Nampyung, Ilpumbyeo and Junamjosaeng) cultivars, to benzobicyclon, mesotrione+pretilachlor (MP) and butachlor (control) in transplanting rice and their treatment influences on rice yield. All Indica${\times}$Japonica rice cultivars exhibited susceptible to both benzobicyclon and MP as reflected by higher visual injury and carotenoid biosynthesis inhibition when compared with Japonica rice cutlivars. The percentage of foliar chlorosis of Indica${\times}$Japonica rice was only 0.9~4.7% for benzobicyclon at 13 days after treatment (DAT) and 30.3~64.4% for MP at 5DAT but it increased rapidly to 88.4~91.2% at 12~20DAT. However, most of the Japonica cultivars are tolerant to bezobicyclon and MP. There was no visible leaf chlorosis but carotenoid biosynthesis was slightly inhibited. Based on relative carotenoid content reduction of benzobicyclon and MP to butachlor, the Indica${\times}$Japonica rice showed 4.6~15.6 fold higher compared with the Japonica rice. The heading date of the injured rice plant was delayed by 3 days and panicle number per square meter and ripened grain ratio were reduced as compared with the control treatment of butachlor. Rice yield of the Indica${\times}$Japonica rice cultivars treated with benzobicyclon and MP was reduced by 7~10%, 3~5%. respectively. The result indicates that rice cultivars vary in tolerance to HPPD-Inhibiting herbicides and Indica${\times}$Japonica rices were more susceptible than the Japonica rices to MP and benzobicyclon. Rice yield of the Indica${\times}$Japonica rices was also significantly reduced by the those herbicide treatments.

Bioinformatic Analysis of the Canine Genes Related to Phenotypes for the Working Dogs (특수 목적견으로서의 품성 및 능력 관련 유전자들에 관한 생물정보학적 분석)

  • Kwon, Yun-Jeong;Eo, Jungwoo;Choi, Bong-Hwan;Choi, Yuri;Gim, Jeong-An;Kim, Dahee;Kim, Tae-Hun;Seong, Hwan-Hoo;Kim, Heui-Soo
    • Journal of Life Science
    • /
    • v.23 no.11
    • /
    • pp.1325-1335
    • /
    • 2013
  • Working dogs, such as rescue dogs, military watch dogs, guide dogs, and search dogs, are selected by in-training examination of desired traits, including concentration, possessiveness, and boldness. In recent years, genetic information has been considered to be an important factor for the outstanding abilities of working dogs. To characterize the molecular features of the canine genes related to phenotypes for working dogs, we investigated the 24 previously reported genes (AR, BDNF, DAT, DBH, DGCR2, DRD4, MAOA, MAOB, SLC6A4, TH, TPH2, IFT88, KCNA3, TBR2, TRKB, ACE, GNB1, MSTN, PLCL1, SLC25A22, WFIKKN2, APOE, GRIN2B, and PIK3CG) that were categorized to personality, olfactory sense, and athletic/learning ability. We analyzed the chromosomal location, gene-gene interactions, Gene Ontology, and expression patterns of these genes using bioinformatic tools. In addition, variable numbers of tandem repeat (VNTR) or microsatellite (MS) polymorphism in the AR, MAOA, MAOB, TH, DAT, DBH, and DRD4 genes were reviewed. Taken together, we suggest that the genetic background of the canine genes associated with various working dog behaviors and skill performance attributes could be used for proper selection of superior working dogs.

Dopamine Transporter Gene and Dopamine D2, D3, D4 Receptor Gene Polymorphisms in Attention Deficit Hyperactivity Disorder (주의력결핍 과잉행동장애에서 도파민 전달체 및 도파민 D2, D3, D4 수용체 유전자 다형성)

  • Park, Pil-Sang;Kim, Dae-Kwang;Jung, Chul-Ho
    • Journal of the Korean Academy of Child and Adolescent Psychiatry
    • /
    • v.19 no.1
    • /
    • pp.19-27
    • /
    • 2008
  • Objectives : The aim of this study was to examine the association of attention-deficit hyperactivity disorder (ADHD) in Korean populations with functional polymorphisms of six genes dopamine receptors (Ser311/Cys311 polymorphism, Taq1 A polymorphism, and Taq1 B polymorphism in DRD2, BalI polymorphism in DRD3, and promoter -521 C/T polymorphism and exon III 48 bp repeat polymorphism in DRD4) and one gene in dopamine transporter (DAT1). Methods : Participants were 58 children with ADHD and 110 control children. The genotypes were determined by PCR. Results : There was a statistically significant difference in genotype frequency of -521 C/T polymorphism within the promoter region of the DRD4 between two groups. Furthermore, in the male group, both genotype and allele frequencies showed statistically significant differences. Conclusion : Findings of the study indicate that -521 C/T polymorphism in promoter region of DRD4 appears to be a possible candidate gene for ADHD in Korean population.

  • PDF

Development and Validation of HPLC-PDA Method and Pattern Recognition Analyses Using Eight Marker Compounds for the Quality Control Between the Seeds of Cuscuta chinensis Lam. and Cuscuta japonica Choisy

  • Nguyen, Duc Hung;Zhao, Bing Tian;Le, Duc Dat;Ma, Eun Sook;Min, Byung Sun;Woo, Mi Hee
    • Natural Product Sciences
    • /
    • v.25 no.4
    • /
    • pp.334-340
    • /
    • 2019
  • Cuscuta chinensis Lam. and Cuscuta japonica Choisy are parasitic plants. C. chinensis seeds were traditionally used for treatment of kidney and liver deficiencies. C. japonica seeds were used as tonic medicine to improve liver function and strengthen kidneys, treatment of high blood pressure, chronic diarrhea, and sore eyes. Cuscutae Semen are seeds of only C. chinensis in Korean Herbal Pharmacopoeia (K.H.P.). The developed HPLC-PDA method easily, accurately, and sensitively quantified using eight marker compounds [hyperoside (1), astragalin, (2), quercetin (3), kaempferol (4), chlorogenic acid (5), 3,4-di-O-caffeoylquinic acid (6), 1,5-di-O-caffeoylquinic acid (7), and 4,5-di-O-caffeoylquinic acid (8)]. In addition, the method may be used to distinguish seeds between C. chinensis Lam. and C. japonica Choisy. Furthermore, the result from the current study was applied to clarify samples between steam processed and unprocessed samples of C. chinensis by pattern analysis.

The Crystal and Molecular Structure of Bromhexine$\cdot$HCl

  • Koo, Hung-Hoe;Jung, Yong-Je;Lee, Soon-Won
    • Archives of Pharmacal Research
    • /
    • v.7 no.2
    • /
    • pp.115-120
    • /
    • 1984
  • The crystals of bromhexine-HCl, $C_{14}$ H$_{21}$ N$_{2}$Br$_{2}$Cl, are orthohombic, space group Pca2 with a = 14.598(2)A, b=12.461(3)A, c =9 9.186(1) A and Z = 4. Intensity dat for 967 reflections (Fobs > 6.sigma.(F)) were collected on a Rigaku-Denki automatic four circle diffractometer. The structure was solved by the Patterson and Fourier methods. Refinements were carried out to the final R value of 0.082. The cyclohexane ring has a normal chair form and the benzene ring is planar. There are three independenet hydrogen bounds in the structure. One is an intermolecular hydrogen bond (N-H... Cl) and the others are intramolecular hydrogen bonds (N-H...Br, N$^{+}$-H...Cl$^{[-10]}$ ) Apart from the hydrogen bounding system the molecules are held together in the crystal by van der Waals force.e.

  • PDF

Analytic and Discrete Fairing of 3D NURBS Curves (3D NURBS 곡선의 해석적 및 이산적 순정)

  • 홍충성;홍석용;이현찬
    • Korean Journal of Computational Design and Engineering
    • /
    • v.4 no.2
    • /
    • pp.127-138
    • /
    • 1999
  • For reverse engineering, curves and surfaces are modeled for new products by interpolating the digitized data points. But there are many measuring or deviation errors. Therefore, it is important to handle errors during the curve or surface modeling. If the errors are ignored, designer could get undesirable results. For this reason, fairing procedure with the aesthetics criteria is necessary in computer modeling. This paper presents methods of 3D NURBS curve fairing. The techniques are based on automatic repositioning of the digitized dat points or the NURBS curve control points by a constrained nonlinear optimization algorithm. The objective function is derived variously by derived curved. Constraints are distance measures between the original and the modified digitized data points. Changes I curve shape are analyzed by illustrations of curve shapes, and continuous plotting of curvature and torsion.

  • PDF