• 반도체디스플레이기술학회지
• /
• 제13권4호
• /
• pp.65-70
• /
• 2014

This paper is to improve the problem of the LED dimming control system using the conventional PWM and DAC method. The conventional PWM method controls the average current to switch dimming signal. This method generates the flicker when controlling at a low current. In order to solve the problem, this system prevents the flicker with the DAC method. The LED is lit at micro-current flowing in the LED. And offset voltage is generated in the output of the DAC when the DAC output is very low voltage as 0V. This was resolved by the voltage drop of the output voltage to construct a negative offset circuit. In addition, the LED current can't flow as set values because of overheating of FET. In order to solve the problem, the 16 bits ADC in the microprocessor is a more accurate current control receives the LED current in comparison with the set value. Therefore, the LED dimming control system proposed in this paper showed the accurate and reliable more than conventional systems.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1508-1511
• /
• 2007

This paper introduces a new texture prediction for MVC( Multi-view Video Coding) which is currently being developed as an extension of the ITU-T Recommendation H.264 | ISO/IEC International Standard ISO/IEC 14496-10 AVC (Advanced Video Coding) [1]. The MVC's prcimary target is 3D video compression for 3D display system, thus, key technology compared to 2D video compression is reducing inter-view correlation. It is noticed, however, that the current JMVM [2] does not effectively eliminate inter-view correlation so that there is still a room to improve coding efficiency. The proposed method utilizes similarity of interview residual signal and can provide an additional coding gain. It is claimed that up to 0.2dB PSNR gain with 1.4% bit-rate saving is obtained for three multi-view test sequences.

• 반도체디스플레이기술학회지
• /
• 제13권4호
• /
• pp.33-36
• /
• 2014

In this paper, a carbon strain gauge for large strain was developed. The carbon strain gauge was fabricated by forming PCB and antenna pattern using Cu/Ni/Au film and carbon resistor pattern using screen printing process on plastic film substrate. It was possible to develop low-cost disposable strain gauge since the carbon paste was cheap and the fabrication process was simple. The wireless communication type carbon strain gauge was fabricated by integrating signal processing circuit, antenna and power all together on the same substrate as a strain gauge. The wireless communication type carbon strain gauge has a merit of being available immediately at the spot without any particular system.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제52권4호
• /
• pp.252-257
• /
• 2003

Acrophobia is an abnormal fear of heights. Medications or cognitive-behavior methods have been mainly used as a treatment. Lately the virtual reality technology has been applied to that kind of anxiety disorders. A virtual environment provides patient with stimuli which arouses phobia, and exposing to that environment makes him having ability to over come the fear. Recently, the patient can take diagnose from a medical doctor in distance with the telemedicine system. The hospital and doctors can get the medical data, audio, video, signals in the actual examination room or operating room via a live interactive system. Audio visual and multimedia conference service, online questionary, ECG signal transfer system, update system are needed in this system. Virtual reality simulation system that composed with a position sensor, head mount display, and audio system, is also included in this telemedicine system. In this study, we tried this system to the acrophobia patient in distance.

• 한국지리정보학회지
• /
• 제12권3호
• /
• pp.45-55
• /
• 2009

본 연구의 목적은 교차로에서 교통류관리의 효율성을 증대시키는 것으로, 연구 결과 신호교차로 에서의 교통류의 효율성을 증대시키기 위해 좌회전 진입허가 lane의 설치를 제안하였다. 연구의 범위는 진입교통신호를 기다리는 차량들이 있는 신호교차로를 선정하여 교통신호현시를 변경함에 따른 신호교차로, 방향 및 신호현시별 교통량(밀도)의 기하학적 구조를 연구하는 것이다. 현 상황과 개선 안 적용시의 방향별 교차로전체의 지체가 비교되었다. 교통분석 패키지인 TSIS(Traffic Software Integrated System)를 사용하여 교차로 교통상황이 분석되었다. 도입가능한 실제 교차로를 조사하여 마산시 석전교차로를 대상으로 시뮬레이션한 결과 비보호로 진입한 방향에서는 지체가 78.6초/대 향상되었으며, 지체가 증가할 것으로 예상되는 방향에서는 4초/대의 증가로 큰 영향을 주지않았다. 즉, 교차로 전체의 대기시간이 개선되었다고 확인할 수 있었다.

• 정보처리학회논문지D
• /
• 제13D권2호
• /
• pp.175-182
• /
• 2006

탐지레이더는 저고도로 비행하는 물체를 탐지할 목적으로 국방 분야에서 운용하고 있다. 레이더가 탐지한 원시자료는 즉시 정보화되어 의사 결정체계인 지상전술C4I체계에 입력되고 분석을 거친 후 사용자에게 실시간으로 전파되어야 한다. 그러나 현 수작업 표정작업은 운용자의 능력에 따라 정확성 및 적시성이 미흡한 실정이다. 따라서 이 논문에서는 레이더 자료를 이용하여 실시간 항적을 표시할 수 있도록 체계에 대한 개념연구, 요구사항 분석, 설계를 통하여 항적추적관리시스템을 구현하였다. 적용된 핵심기술은 좌표 체계 전환 알고리즘과 기존 통신장비와의 통신프로토콜 개선, 신호 및 자료처리 프로세스를 설계에 반영하였다. 특히, 레이더 신호의 중복처리 및 융합 알고리즘을 개발하여 상황도상에 표적정보를 도시하는 기술을 구현함으로써, 기존 항적관리전력 운용의 신뢰성, 신속성, 편의성을 향상시킬 수 있었다.

• Journal of Biosystems Engineering
• /
• 제14권4호
• /
• pp.221-228
• /
• 1989

A data acquisition system was designed to measure the forces on a rolling coulter in three coordinated directions, angular velocity of the coulter and travel speed of a soil bin. The data acquisition system consisted of a dynamometer, speed transducers, a signal conditioner, an inter-face board, an Aim-65 microcomputer and a digital data recorder. Strain gages were attached on the surface of the dynamometer and connected to form three Wheatstone bridges, which measure the draft force, the vertical force and the side force on the coulter. An interaction among three dimensional forces was found during the calibration. A matrix procedure was used to correct the forces for this interaction. Rotary shaft encoders were mounted on the coulter and on the soil bin drive to measure the angular velocity of the coulter and the travel speed of the soil bin. The angular velocity and the travel speed were computed by counting the number of pulse signals from the rotary shaft encoders every 0.2 second. The digital signals from the rotary shaft encoders were connected to counters and the analog signals from the dynamometer, after passing through the signal conditioner, were connected to the A/D converter. The microcomputer programs, written in assembly language, were developed to read signals from the transducers, convert them to actual unit, display them upon request and record them on a sigital tape every 0.2 second.

• 대한의용생체공학회:의공학회지
• /
• 제12권4호
• /
• pp.277-284
• /
• 1991

This study describes the ambulatory ECG monitoring system for the remote autom atic diagnosis. System: tlardware is based on one chip microcomputer(80c31) and its peripherals which consists of A/D, EPROM, RAM, LCD display and two preamplifiers, Power circuits, control logic circuits. A/D converted data were differentiated and low pass filtered. The detection of QRS complex and R point were accomplished by software algorithm based on adaptive threshold computed on low pass fi:leered signal. Rhythm analysis is performed by RR interval and average RR interval. The performance of QRS detection algorithm is evaluated by using MIT/BIH data base. Using this system, the trends of the arrythmia during the long term could be saved and displayed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1628-1630
• /
• 2002

In this paper, we measured 3-dimensional temporal behavior of the light emitted from discharge cell of plasma display panel(PDP) as a function of the pressure using the scanned point detecting system. The detected light signal through the PM tube is sent on the oscilloscope and oscilloscope which is connected to PC with GPIB. The whole system is controlled by a PC. From the temporal behavior results, we could analyze the discharge behavior of panel with Ne-Xe(4%) mixing gas and 300torr, 400torr, 500torr pressure. The top view of panel shows that the discharge moves from inner edge of cathode electrode to outer cathode electrode forming arc type. At the 300torr, initial emission time is very fast. The side view of panel shows that the light is detected up to $150{\mu}m$ height of barrier rib. In the panel of 300torr, emission distribution is wider than the others.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1908-1909
• /
• 2007

The design of an intelligent toothbrush, capable of monitoring brushing motion, orientation through the grip axis, during toothbrushing is described. Inappropriate Toothbrushing styles, even in adults, sometimes cause dental problems, cavities, gingivitis, etc. This smart system provides user to monitor his or her brushing pattern using accelerometer and magnetic sensors for evaluation of toothbrushing style. Directional information of toothbrush with respect to earth's magnetic field and activity data were measured by a miniaturized low-power micro- controller, MSP430 and transmitted to personal computer by 2.4GHz radio transmitter, nRF2401. A personal computer provides an on-line display of activity and orientation measurements during toothbrushing. The signal trace is then analyzed to extract clinically relevant measurement. This preliminary study showed that the proposed monitoring system was conceived to aid dental care personnel in patient education and instruction in oral hygiene regarding brushing style.