• 수산해양기술연구
• /
• 제43권1호
• /
• pp.49-61
• /
• 2007

Otter boards in the trawl are the one of essential equipments for the net mouth to be spread to the horizontal direction. Its performance should be considered in the light of the spreading force to the drag and the stability of towing in the water. Up to the present, studies of the otter boards have focused mainly on the drag and lift force, but not on the stability of otter boards movement in 3 dimensional space. In this study, the otter board is regarded as a rigid body, which has six degrees of freedom motion in three dimensional coordinate system. The forces acting on the otter boards are the underwater weight, the resistance of drag and spread forces and the tension on the warps and otter pendants. The equations of forces were derived and substituted into the governing equations of 6 degrees of freedom motion, then the second order of differential equations to the otter boards were established. For the stable numerical integration of this system, Backward Euler one of implicit methods was used. From the results of the numerical calculation, graphic simulation was carried out. The simulations were conducted for 3 types of otter boards having same area with different aspect ratio(${\lambda}=0.5,\;1.0,\;1.5$). The tested gear was mid-water trawl and the towing speed was 4k't. The length of warp was 350m and all conditions were same to each otter board. The results of this study are like this; First, the otter boards of ${\lambda}=1.0$ showed the longest spread distance, and the ${\lambda}=0.5$ showed the shorted spread distance. Second, the otter boards of ${\lambda}=1.0$ and 1.5 showed the upright at the towing speed of 4k't, but the one of ${\lambda}=0.5$ heeled outside. Third, the yawing angles of three otter boards were similar after 100 seconds with the small oscillation. Fourth, it was revealed that the net height and width are affected by the characteristics of otter boards such as the lift coefficient.

• Genes and Genomics
• /
• 제40권11호
• /
• pp.1181-1197
• /
• 2018

Tropical plant rubber tree (Hevea brasiliensis) is the sole source of commercial natural rubber and low-temperature stress is the most important limiting factor for its cultivation. To characterize the gene expression profiles of H. brasiliensis under the cold stress and discover the key cold stress-induced genes. Three cDNA libraries, CT (control), LT2 (cold treatment at $4^{\circ}C$ for 2 h) and LT24 (cold treatment at $4^{\circ}C$ for 24 h) were constructed for RNA sequencing (RNA-Seq) and gene expression profiling. Quantitative real time PCR (qRT-PCR) was conducted to validate the RNA-Seq and gene differentially expression results. A total of 1457 and 2328 differentially expressed genes (DEGs) in LT2 and LT24 compared with CT were respectively detected. Most significantly enriched KEGG pathways included flavonoid biosynthesis, phenylpropanoid biosynthesis, plant hormone signal transduction, cutin, suberine and wax biosynthesis, Pentose and glucuronate interconversions, phenylalanine metabolism and starch and sucrose metabolism. A total of 239 transcription factors (TFs) were differentially expressed following 2 h or/and 24 h of cold treatment. Cold-response transcription factor families included ARR-B, B3, BES1, bHLH, C2H, CO-like, Dof, ERF, FAR1, G2-like, GRAS, GRF, HD-ZIP, HSF, LBD, MIKC-MADS, M-type MADS, MYB, MYB-related, NAC, RAV, SRS, TALE, TCP, Trihelix, WOX, WRKY, YABBY and ZF-HD. The genome-wide transcriptional response of rubber tree to the cold treatments were determined and a large number of DEGs were characterized including 239 transcription factors, providing important clues for further elucidation of the mechanisms of cold stress responses in rubber tree.

• 농업생명과학연구
• /
• 제53권4호
• /
• pp.113-124
• /
• 2019

본 연구에서는 국내 밭작물 재배농가에서 주로 사용되는 캠방식 채소 정식기를 대상으로 작동특성 및 식부장치 작동 메커니즘 분석을 수행하였다. 정식기의 주요 구성요소 및 동력전달경로를 파악하였으며, 주행속도 및 주간거리 단수 변화에 따른 최대 및 최소 작동주기를 도출하였다. 이를 바탕으로 3D모델링 및 시뮬레이션을 수행하여 식부호퍼 극하단점의 궤적 및 조건별 주간거리를 도출하였으며 필드시험을 통해 실제 주간거리와 비교 검증하였다. 주요 결과로써, 식부장치는 13개의 링크와 17개의 회전 조인트 및 1개의 하프 조인트로 구성된 1 자유도의 기구이며, 각 부분들은 캠과 링크장치들의 복합구조를 갖는다. 식부장치 요소들의 연속적이고 반복적인 운동에 의해 식부호퍼는 지면과 연직인 자세를 유지하며 묘를 안정적으로 정식한다. 동력은 엔진과 변속기를 통해 주행부 및 식부장치로 전달되었으며 식부장치의 최대 및 최소 주간거리는 각각 약 900 mm 및 350 mm이다.

• 정보처리학회논문지B
• /
• 제15B권5호
• /
• pp.421-434
• /
• 2008

컴퓨터 그래픽스, 가상현실 및 증강현실 기술이 발전됨에 따라, 이들 기술을 기반으로 하는 다양한 응용 분야에서 3차원 공간에서의 객체 선택 및 조작 등의 3차원 인터랙션 기능들이 요구되고 있다. 본 논문은 고가의 데스크탑용 3차원 마우스 기능을 시뮬레이션 할 수 있는 비전 기반의 3차원 인터랙션 프레임워크를 제안한다. 제안 프레임워크는 3색 LED를 이용하여 특수하게 제작된 인터랙션 도구를 포함하며, 비디오 시퀀스로부터 LED의 위치 및 색상을 인식하여 다양한 마우스 이벤트와 6 자유도(Degree Of Freedom)의 인터랙션을 지원한다. 제안 도구는 고가이며 숙련된 조작을 필요로 하는 기존의 3차원 마우스에 비하여 직관적이고 편리하여 별도의 학습이나 훈련 없이 사용될 수 있다. 본 논문에서는 제안 프레임워크를 구성하는 3색 LED를 이용한 포인터 제작 방법, 포인터의 3차원 위치 및 방향 계산법, 비디오 영상에서의 LED 색상분석 기법에 대하여 설명한다. 또한, 계산된 3차원 위치 및 방향에 대한 오차 측정 결과를 보임으로써 제안 도구의 정확성 및 유용성을 검증한다.

• Nuclear Engineering and Technology
• /
• 제46권3호
• /
• pp.439-446
• /
• 2014

An amphibious inspection robot system (hereafter AIROS) is being developed to visually inspect the in-containment refueling storage water tank (hereafter IRWST) strainer in APR1400 instead of a human diver. Four IRWST strainers are located in the IRWST, which is filled with boric acid water. Each strainer has 108 sub-assembly strainer fin modules that should be inspected with the VT-3 method according to Reg. guide 1.82 and the operation manual. AIROS has 6 thrusters for submarine voyage and 4 legs for walking on the top of the strainer. An inverse kinematic algorithm was implemented in the robot controller for exact walking on the top of the IRWST strainer. The IRWST strainer has several top cross braces that are extruded on the top of the strainer, which can be obstacles of walking on the strainer, to maintain the frame of the strainer. Therefore, a robot leg should arrive at the position beside the top cross brace. For this reason, we used an image processing technique to find the top cross brace in the sole camera image. The sole camera image is processed to find the existence of the top cross brace using the cross edge detection algorithm in real time. A 5-DOF robot arm that has multiple camera modules for simultaneous inspection of both sides can penetrate narrow gaps. For intuitive presentation of inspection results and for management of inspection data, inspection images are stored in the control PC with camera angles and positions to synthesize and merge the images. The synthesized images are then mapped in a 3D CAD model of the IRWST strainer with the location information. An IRWST strainer mock-up was fabricated to teach the robot arm scanning and gaiting. It is important to arrive at the designated position for inserting the robot arm into all of the gaps. Exact position control without anchor under the water is not easy. Therefore, we designed the multi leg robot for the role of anchoring and positioning. Quadruped robot design of installing sole cameras was a new approach for the exact and stable position control on the IRWST strainer, unlike a traditional robot for underwater facility inspection. The developed robot will be practically used to enhance the efficiency and reliability of the inspection of nuclear power plant components.

• 한국항해항만학회지
• /
• 제34권3호
• /
• pp.195-203
• /
• 2010

본 논문은 통합채광시스템의 동력학 해석을 다루고 있다. 통합채광시스템은 채광선, 수직양광관, 중간 저장 장소인 버퍼, 유연관, 자항식집광기로 구성되어 있다. 자항식집광기와 버퍼는 6자유도의 강체로 가정하였으며, 수직양광관과 유연관의 동적거동 해석을 위해 집중질량 매개방법을 이용한 이산화 모델을 적용하였다. 채광선에 대한 운동은 포함시키지 않았지만 경계조건을 통하여 채광선의 움직임을 표현하였다. 연약한 해저면을 주행하는 차량에는 연약지반 역학 모델을 적용시켰다. 수직양광관-버퍼, 버퍼-유연관, 유연관-자항식집광기의 연결에는 회전구속과 볼 구속조건을 사용하였다. 연성 동력학 모델의 운동방정식을 유도하기 위해 국부좌표계를 사용하였으며, 4개의 오일러 매개변수를 사용하여 각 시스템의 자세를 표현하였다. 통합 채광시스템의 운동 방정식 해를 구하기 위해서 증분-반복법을 적용하였으며, 시간영역 적분기는 newmark-${\beta}$를 사용하였다. 통합 채광시스템의 동적 거동 해석을 수치해석을 통해 분석하였다.

• 대한의용생체공학회:의공학회지
• /
• 제29권1호
• /
• pp.32-39
• /
• 2008

This paper reports on a realtime OS based master-slave configuration robot control system for laparoscopic surgery robot which enables telesurgery and overcomes shortcomings with conventional laparoscopic surgery. Surgery robot system requires control system that can process large volume information such as medical image data and video signal from endoscope in real-time manner, as well as precisely control the robot with high reliability. To meet the complex requirements, the use of high-level real-time OS (Operating System) in surgery robot controller is a must, which is as common as in many of modem robot controllers that adopt real-time OS as a base system software on which specific functional modules are implemened for more reliable and stable system. The control system consists of joint controllers, host controllers, and user interface units. The robot features a compact slave robot with 5 DOF (Degree-Of-Freedom) expanding the workspace of each tool and increasing the number of tools operating simultaneously. Each master, slave and Gill (Graphical User Interface) host runs a dedicated RTOS (Real-time OS), RTLinux-Pro (FSMLabs Inc., U.S.A.) on which functional modules such as motion control, communication, video signal integration and etc, are implemented, and all the hosts are in a gigabit Ethernet network for inter-host communication. Each master and slave controller set has a dedicated CAN (Controller Area Network) channel for control and monitoring signal communication with the joint controllers. Total 4 pairs of the master/slave manipulators as current are controlled by one host controller. The system showed satisfactory performance in both position control precision and master-slave motion synchronization in both bench test and animal experiment, and is now under further development for better safety and control fidelity for clinically applicable prototype.

• 한국해양공학회지
• /
• 제33권4호
• /
• pp.350-357
• /
• 2019

The development of marine technology is expected to increase the demand for marine plants because of increasing oil prices. Therefore, there is also expected to be an increase in the demand for cylindrical structures such as URF (umbilical, riser, flowline) structures and spars, which are used operating in various seas. However, a cylindrical structure experiences vortex induced motion (VIM) in a current. In particular, for risers and umbilicals, it is important to identify the characteristics of the VIM because interference between structures can occur. In addition, various studies have been conducted to reduce VIM because it is the cause of fatigue damage to structures. The helical strake, which was developed for VIM reduction, has an excellent VIM reduction performance, but is difficult to install on structures and has a negative effect on heave motion. Therefore, the purpose of this study was to supplement the shortcomings of the helical strake and develop a high-performance reduction device. In the reduction device developed in this study, a string is placed around the structure inside the flow, causing vibration. The vibration of this string causes a small turbulence in the flow field, reducing the VIM effect on the structure. Finally, in this study, the 2-DOF motion characteristics of models without a suppression device, models with a helical strake, and models with a string were investigated, and their reduction performances were compared through model tests.

• 대한지리학회지
• /
• 제28권2호
• /
• pp.77-98
• /
• 1993

본 연구는 암설사면지형이 잘 발달하고 다양하게 분포하는 태백산맥의 남부산지를 대상으로 항공 사진판독과 도상계측 및 현지조사를 통하여 노출암설사면의 분포, 형태 및 퇴적물의 특성을 분석하고 사면의 지형적 배열과 지형발달에 관해서 연구한 논문으로써 분포적 특성에 있어서는 애추의 경우 기반암이 경암이거나 절리가 잘 발달된 지질에서, 암괴류의 경우는 화강섬록암 지질에서 높은 분포밀도를 보였다. 형태적 특성은 애추, 암괴류 모두 설상이 각각 83${\%}$, 80${\%}로 가장 많았으며 지형면의 경사도에 있어서는 애추가, 길이에 있어서는 암괴류가 각각 우세했다. 퇴적물의 특성중 암설의 평균입경은 암괴류가 보다 크게 나타났다. 한 지형면에서 암설의 장축방향성의 경우 방향성 있는 경우와 없는 경우가 있는데, 후자는 지형면상의 함몰로 그 방향성이 상실된 것으로 보인다. 끝으로 지형발달의 경우, 애추는 암석낙하(rock fall)에 의한 형성기(최종빙기)와 2차적인 영역에 의한 조정기(후빙기)로 암괴류는 암괴의 생성기(제3가 또는 제 4기의 간빙기), 암괴류의 형성기(최종빙기), 조정기(후빙기)로 구분할 수 있었다. 그리고 산지 사면의 배열유형은 6가지 유형으로 분류되었다.