• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.4
• /
• pp.552-557
• /
• 2020

The Radar Cross Section (RCS) is a virtual region indicating the strength of a wavelength at which a radar signal is reflected and received. As the ship's RCS represents its own stealth performance and survivability, efforts have been made in various areas from design to construction to reduce the RCS. The RCS can be predicted using design drawings and CAD models, but it is necessary to measure the RCS at sea since sea clutter and multipath reflections occur in the sea environment. However, such RCS predictions and measured values provide only a simple relative magnitude to the user, and there has not been much research on this topic. In this paper, a missile countermeasure technique was studied using 3D RCS measurement data in an operating environment. The elevation and azimuth angle of the ship viewed from the missile were estimated using the location information of the missile, and the RCS value was inverted by mapping it to previously measured 3D RCS measurement data. In addition, by using the movement information of the missile, the RCS observed by the missile could be predicted in advance, and this method can be used to propose a response plan based on the maneuvering and chaff system.

• The Journal of the Convergence on Culture Technology
• /
• v.4 no.3
• /
• pp.191-196
• /
• 2018

The purpose of this study is to propose improvements for 3D garment simulation system by comparison with the difference between real garment and 3D garment simulation A, B of women's jacket. The process of the study was to take pictures on the standard sized subject wearing the jacket of basic size, to get a avatar from body sizes of the subject, and to obtain images of 3D garment simulation on the avatar. The appearance evaluation was resulted by the method of a questionnaire survey after presenting the images to 20 members of women's jacket customer. On that appearance evaluation, performed comparative analysis of same degree between the real garment and the Virtual garment A in women's jacket. And performed comparative analysis of same degree between the real garment and the Virtual garment B in women's jacket. It was done t-test for difference in appearance evaluation between real garment/virtual garment A and Real garment/virtual garment B. There were the differences on 4 areas: 1 question on the fabric, 9 questions on the front, 3 questions on the side, and 6 questions on the back.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.2
• /
• pp.117-124
• /
• 2012

Due to recent urban maintenance project for the aged towns, the reconstruction of apartments into super-high-rise and high-rise apartment structures has been approved for concentrated use of land, and accordingly the infringement on sunshine for nearby residential area is rising as a social issue. Especially the educational environment conditions according to infringement on sunshine in educational facilities are posing many problems. Accordingly in this study, for such sunshine analysis of educational environment, Auto $CAD^{(R)}$ software has been used to construct the 3D model for the educational facility structures. And with the simulation technique, the windows and the schoolyard of the education facility were set to be the lighting standard surface to take measurements for the sunshine environment of the educational facilities by the minute from 8:00AM until 4:00PM for the sunshine amount by true solar time according to the movement of the sun. Also, the sunshine environment of the education facility according to the damage before/after new construction of apartments was charted, and through comparison with the video produced by sun shadow projection method, the sunshine amount of the educational environment could be verified. In future, it is expected to be efficiently used in the sunshine analysis of education environment utilizing such simulation techniques.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.4
• /
• pp.199-204
• /
• 2021

In this study, an isogoemetric analysis (IGA) method that uses NURBS (Non-Uniform Rational B-Spline) basis functions in computer-aided design (CAD) systems is employed to account for the geometric exactness of curved electrodes constituting an electro-adhesive pad in electrostatic problems. The IGA is advantageous for obtaining precise normal vectors when computing the electro-adhesive forces on curved surfaces. By performing parametric studies using numerical examples, we demonstrate the superior performance of the curved electrodes, which is attributed to the increase in the normal component of the electro-adhesive forces. In addition, concave curved electrodes exhibit better performance than their convex counterparts.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.4
• /
• pp.97-105
• /
• 2000

One of the most important steps to determine the blank shape and dimensions in deep drawing process is to calculate the surface area of the product. In general, the surface area of axisymmetric products is calculated by mathematical or graphical methods. However, in the case of non-axisymmetric products, it is difficult to calculate the exact surface area due to errors as separated components. Fortunately, it is possible for elliptical products to recognize the geometry of the product in the long side and short side by drafting in another two layers on AutoCAD software. So, in this study, a surface area calculating system is constructed for a design of blank shape of deep drawing products. This system consists of input geometry recognition module and three dimensional modeling module, respectively. The suitability of this system is verified by applying to a real deep drawing product. The system constructed in this study would be very useful to reduce lead time and cost for determining the blank shape and dimensions.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2004.05a
• /
• pp.257-264
• /
• 2004

분산 제조 시스템간의 협업을 가능케 하는 e-Manufacturing paradigm 의 성공을 위해서는 CAD-CAM-CNC chain 의 제조 분야뿐만 아니라 SCM, ERP, CRM 등의 상위 시스템과의 제품 및 가공 정보의 원활한 흐름이 필수적이다. STEP 과 STEP-NC 는 이를 해결할 표준으로 자리매김 할 것으로 기대되고 있다. 본 논문은 STEP-NC 의 국내 promotion 차원에서 참고문헌 [1]의 밀링용 파트프로그래밍 소개에 이어: 1) 선반용 데이터 모델, 2) 선반용 파트 프로그램의 작성 방법, 3) XML 을 이용한 파트 프로그램의 표현 방법들을 소개하고, 4) STEP-NC 기반의 생산 환경 구축을 위한 방안을 기술하였다.

• Computational Structural Engineering
• /
• v.3 no.3
• /
• pp.62-65
• /
• 1990

RISC System/6000은 유닉스 시스템인 AIX를 오퍼레이팅 시스템으로 채택하였고, 기존의 RISC기술에 혁신적인 진보를 이룩하여 가격 대 성능비를 크게 높임과 동시에 시스템의 기능을 극도로 최적화 시킨 새로운 차원의 아이비엠의 고성능 시스템패밀리이다. 이 시스템은 새로운 RISC 시스템 구조인 POWER(Performance Optimization With Enhanced RISC) 개념과 제2세대 수퍼스칼라 기법 및 마이크로 채널 아키텍쳐로 설계되어 있다. 특히 하나의 사이클에서 4개 이상의 명령어를 병렬처리 하도록 설계된 수퍼스칼라 기능을 통하여 복잡한 그래픽 또는 이미지 처리 및 고도의 수치해석 기능이 뛰어나다. RISC시스템/6000은 과학기술계산업무나 멀티사용자의 일반 비즈니스용으로도 모두 뛰어난 범용 컴퓨터로 그래픽 프로세서의 선택과 함께 CAD/CAM이나 그래픽/애니메이션전용 시스템을 구성할 수 있으며, 최고 512 사용자에 이르는 멀티 사용자 시스템을 구성하여 사용할 수 있다. 이전의 유닉스 시스템에 있어서 큰 약점이었던 사용자 인터페이스와 멀티 사용자 및 테스킹이 크게 강화 되었으며, 기존의 IBM 시스템 및 타 기종과도 네트워크 구성이 용이하고 수백여종의 과학기술 적용업무를 이용할 수 있다.

• Tunnel and Underground Space
• /
• v.5 no.4
• /
• pp.297-307
• /
• 1995

터널은 긴 선상구조물로서 사정조사결과와 다른 지질조건이 나타날 수 있으므로, 안전하고 합리적인 터널공사를 위해서는 시공중 지질조건에 적합한 지보설계를 실시하는 것이 필수적이다. 이를 위해서는 시공중 터널주변자반에 대한 정량적이고 공학적인 평가가 매우 중요하다. 그러나 시공중 암반을 평가하는 것은 매우 어렵고 조사자의 경험과 지식의 차이에 의해 평가정도가 크게 달라져 그 불합리성이 심화되고 있는 실정으로 터널주변암반에 대한 합리적인 평가방법이 절실히 요구되고 있다. 본 연구에서는 터널화상처리, GeoCAD, 역해석으로 구성된 평기시스템을 개발하였다. 본 시스템은 터널막장에서의 조사.시험 및 화상처리기법을 통하여 암반분류.평가를 실시하고, 터널주변 지반구조 및 굴착/지보과정의 3차원 모델링을 통하여 전방지질을 예측가능하게 하며, 터널계측자료의 역해석을 통하여 터널주변 지반의 물성을 정량적으로 평가할 수 있는 체계적이고 종합적인 평가시스템이다. 또한 이를 NATM 공법으로 시공되는 터널현장에 적용하므로써 본 시스템의 현장적용성을 검증하였으며, 이를 통해 적절한 지보공을 시공하여 터널의 안정성을 확보하고 합리적인 시공관리를 달성할 수 있었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.720-725
• /
• 1991

This paper is concerned with the program of the automatic mesh generation for 2-dimensional domain which contains the curved boundaries and holes. This program treats a new vertical - line drawing method. This method starts with 4-subdivisions of problem domain and the classification of the cross points of grid lines and boundaries. And the new node is generated by the vertical line to the line connecting the two intersections of a boundary and two grid lines in general. The boundaries are piecewise-curves composed of lines, circles, arcs, and free curves. The free curves are generated by B-Spline form. Although there were some bad elements for the complex boundary, it was possible to obtain the acceptable elements for the given boundaries. The results of automatic mesh generation can be verified directly by drawing on the computer monitor in executing the program. And it is possible to add the processes - that is, editing, hard copying, etc - using the script file in Auto-CAD.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.4
• /
• pp.174-182
• /
• 2003

Recently, medical imaging has taken interest on CAD based solution for anatomical part fabrication or finite element analysis of human body. In principle, contours representing object boundary are obtained through image processing techniques. Surface models are then approximated by a skinning method. For this, various methods should be applied to medical images and contours. The major bottleneck of the reconstruction is to remove shape inconsistency between contours and to generate the branching surface. In order to solve these problems, bi-directional smoothing and the composite contour generation method are proposed. Bi-directional smoothing has advantage of removing the shape inconsistency between contours and minimizing shrinkage effect with a large number of iterations. The composite contour by the proposed method ensures smooth transition in branching region.