• The Korean Journal of Food And Nutrition
• /
• v.9 no.4
• /
• pp.409-412
• /
• 1996

본 연구는 '96학년도 배재대학교 교내 학술 연구비 지원으로 수행되었다. ^x Juice yield of peach "Yoo Myung" by pretreatment of various enzymes and heat was determined, and physicochemical properties of peach wine fermented by some Saccharomyces cerevisiae were also investigated. 89.2% of juice yield was showed in mixture treatment of pectinase and cellulase at 35$^{\circ}C$ for 8 hrs, 82% of yield was also showed in single treatment of pectinase and cellulase. Ethyl alcohol content of peach wine fermented by wild type Saccharomyces cerevisiae 49-2 was 14.55. However, wine from thermophilic Saccharomyces cerevisiae D-71 was excellent in taste and flavor.nd flavor.

• Journal of the Korean Chemical Society
• /
• v.12 no.4
• /
• pp.155-159
• /
• 1968

On the extraction of humic acid from peat, the optimum conditions were studied and the effects of them on the characteristics of humic acid were also examined by means of infrared spectroscopy. 1. Pretreatment of peat with diluted 6-8% HCl solution for 5 hrs. prior to extraction with alcohol-benzol azeotropic mixture have resulted the better yield of humic acid. The water soluble Na-humates were obtained by the subsequent extraction with one hundred times quantity of caustic soda solutieon for 1hr. at 90 $^{\circ}C$. Thus the pure humic acids have been yielded approximately 40% (by wt.) from the raw peat. 2. In characteristics of humic acid, the chemical structure, mainly the contents of such functional groups as -COOH, -OH (phenol type), $-CH_2CO-$, $-CH_2{\cdot}O{\cdot}CH_2-$ and aromatic rings were varied according to the concentration of alkaline solution, temperature and time when the humic acids were extracted with alkali.

• Microbiology and Biotechnology Letters
• /
• v.45 no.4
• /
• pp.316-321
• /
• 2017

Hyperthermal acid hydrolysis pretreatment of Eucheuma denticulatum was carried out using 12% (w/v) seaweed slurry and 90 mM $H_3PO_4$ at $150^{\circ}C$ for 10 min. The use of Candida lusitaniae with adaptive evolution was evaluated for ethanol fermentation. The levels of ethanol production by separate hydrolysis and fermentation (SHF) at 72 h with non-adapted and adapted C. lusitaniae were 10.1 g/l with ethanol yield ($Y_{EtOH}$) of 0.23, and 18.1 g/l with $Y_{EtOH}$ of 0.45, respectively. Adaptive evolution was employed in this study to improve the efficiency of ethanol fermentation. Development of the SHF process could enhance the overall ethanol fermentation yields of the red seaweed E. denticulatum.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2011.10a
• /
• pp.167-177
• /
• 2011

Renewable energy resources and technologies have the potential to provide long-lasting solutions of the global energy-requirements faced by the economic and environmental sectors of a nation. Therefore, waste money bills were used as renewable energy source for the production of bio-ethanol. In this study, different concentrated NaOH 0.5%. 1.0%, 2.0%, 3.0% and 0.0% (as a control) were used for 10, 20 and 30 mins at $121^{\circ}C$/15 psi in an autoclave. Saccharification and fermentation (aerobic and anaerobic) were carried out through commercial enzyme Celluclast 1.5 L, Novozymes 188 and Saccharomyces cerevisiae KCCM 11304 respectively. The results of pretreatment showed that the NaOH pre-treated substrate enhanced enzyme action and released more amount of glucose. The amount of glucose was found with the increasing concentration of NaOH and time $44996.95{\pm}6.30$, $46763.10{\pm}3.56$, $53421.32{\pm}4.72$, $63431.25{\pm}6.95$ and $56850.98{\pm}6.75\;ng/{\mu}l$ for 30 min respectively. As for bioethanol, the conversion rate of NaOH resulted $1010.08{\pm}4.71$, $1050.25{\pm}4.37$, $1109.49{\pm}4.39$, $1139.25{\pm}3.26$ and $1020.77{\pm}3.89$ ppm for aerobic; $16730.54{\pm}6.67$, $17076.45{\pm}6.25$, $17516.17{\pm}4.49$, $19782.68{\pm}6.19$ and $17973.39{\pm}7.50$ ppm for anaerobic and $18935.02{\pm}4.59$, $19895.45{\pm}5.39$, $21912.95{\pm}4.83$, $24895.21{\pm}6.72$ and $18961.21{\pm}4.90$ ppm for anaerobic condition with benzoic acid for respective condition. Thus, the results of the present work clearly revealed that with the increasing of alkali concentration might be more effective for bio-ethanol production from waste money bill, which is economic and environmental friendly.

• Textile Coloration and Finishing
• /
• v.4 no.2
• /
• pp.76-83
• /
• 1992

Wool tropical and nylon taffeta were treated with low temperature plasma of $O_2$, $N_2$, NH$_3$, CF$_4$ and CH$_4$ for the intervals of 10 to 300 sec, and then dyed with leveling and milling type acid dyes in presence or absence of buffer solution. From the color depth of dyed fabrics, effect of plasma gases, treated time, dyeing time and temperature on dyeing property was studied. The results of the experiment can be summarized as follows: 1) The plasma treatments except methane gas increased the color depth of dyed wool fabrics, but not that of dyed nylon fabrics regardless of the plasma gases used. 2) The color depth of wool fabrics dyed in the dye bath without buffer solution was increased by the low temperature plasma, especially increased much more by CF$_4$ plasma treatment. It is found that with the identification of F- ion in the residual dye bath the hydrogen fluoride gas was adsorbed on wool fabrics in the plasma treatment. 3) The color depth of wool fabrics was increased with the time of $O_2$ and CF$_4$ plasma treatments. 4) In both cases of the leveling and milling type acid dyes, the rate of dyeing was increased in the low temperature plasma treatments, and it is found that the leveling type acid dye increased the color depth at relatively low temperature below 4$0^{\circ}C$, compared with the milling type acid dye.

• Applied Chemistry for Engineering
• /
• v.10 no.4
• /
• pp.568-575
• /
• 1999

Two different digestion procedures for the simultaneous determination of major and platinum-group element(PGE) in spent automobile catalysts containing PGE and silicates by inductively coupled plasma atomic emission spectrometry(ICP-AES) are compared. Combinations of mixed aids using HF, $HNO_3$, HCl, $HClO_4$, $H_2O_2$, and $H_3BO_3$ are utilized for the hot plate dissolution method and the closed-vessel microwave digestion method, The latter method has been shown to be relatively superior in terms of recovery, analysis time, and amount of aqua regia (3 parts HCl + part $HNO_3$ required to dissolve PGE in comparison with conventional open vessel hot-plate dissolution. The best results were drawn from the following conditions: In closed Teflon PFA vessels under microwave heating with temperature/pressure regulation, a 0.25 g portion of sample was digested in 2 mL of HF, 2 mL of $HNO_3$ and 6mL of HCl under the pressure of 200 psi(13.79 bar) at $180^{\circ}C$ for 1hr, followed by a second digestion stage with 16 mL of 5%(w/v) boric acid under the pressure of 20 psi(1.38 bar) at $100^{\circ}C$ for 10 min. After the microwave heating, the sample was post-treated with 10 mL of aqua regia twice by hot-plate heating. This condition gives the PGE recovery within 85~110% and the relative standard deviations within 2%. The method developed can therefore be regarded as an alternative method for routine analysis of spent automobile catalysts.

• Applied Chemistry for Engineering
• /
• v.27 no.4
• /
• pp.371-379
• /
• 2016

In this article, the foamed body of glass was manufactured from the waste borosilicate glass produced by wet pulverization process without additional pretreatment which can be used as a recycling method for waste LCD panel glass. Each 100 g of pulverized waste borosilicate glass with the size of less than 270 mesh were mixed with 0.3 weight fraction of carbon and 1.5 weight fraction of $Na_2CO_3$, $Na_2SO_4$ and $CaCO_3$ and let them foamed for 20 minutes at $950^{\circ}C$ to manufacture the foamed body having the density of less than $0.3g/cm^3$. Additionally, adding $SiO_2$ or $H_3BO_3$ to the mixture enabled the foamed body to have efficient formation of open pores which showed the possibility for producing the foamed body with new functionalities such as sound absorption.

• Resources Recycling
• /
• v.3 no.3
• /
• pp.21-26
• /
• 1994

In present study an attempt has been made to extract the high purity $Al_2O_3$from domestic aluminous shale. The processes of the salt roasting with ammonium sulfate, extraction with sulfuric acid and calcination were adopted. In the extraction of alumina, the effects of the sulfuric acid concentration, the reaction time and the temperature has been investigated. The reaction products were analyzed by X-ray diffraction, DTA-TG, chemical analysis and SEM. The results are summerized as follows: 1)The pretreatment conditions were 0.6M-$(NH_4)_2SO_4$and $650^{\circ}C$ in sintering temperature. 2) The optimum extraction conditions were $10%-H_2SO_4$ and 240 minutes in acid treating time. 3)Physical properties of sintering materials were confirmed as $\alpha-Al_2O_3$ by X-ray diffraction method and the purity of $\alpha-Al_2O_3$ was 99.23%.

• Textile Coloration and Finishing
• /
• v.30 no.2
• /
• pp.150-157
• /
• 2018

The purpose of this study is to investigate the proper dyeing condition, color fastness and functionality of silk fabrics dyed with Zizania latifolia Turcz. FT-IR spectrum analysis suggests that colorants of Zizania latifolia Turcz. are tannins. The dyeing of the silk fabrics using Zizania latifolia Turcz. was very good even without pretreatment or mordanting treatment. Optimal dyeing conditions of silk fabrics were colorant concentration of 200%(o.w.f.), dyeing temperature of $100^{\circ}C$, dyeing time of 60 minutes and dyebath pH of 5.5. Color fastness of dyed silk fabrics to washing, rubbing, perspiration and light was 4~4-5, 5, 4~4-5(acidic), 4-5(alkaline) and 2 respectively. UV protection rate and deodorization rate of silk fabrics dyed with Zizania latifolia Turcz. were improved. Reduction rate(Staphyloccus aureus) of silk fabrics was excellent at 98.3%. As a result, it was confirmed that the Zizania latifolia Turcz. could be used as an eco-friendly functional natural dye.

• Fashion & Textile Research Journal
• /
• v.21 no.2
• /
• pp.231-236
• /
• 2019

This study investigated the proper dyeing conditions, color fastness and functionality of wool fabrics dyed with Zizania latifolia Turcz. We also tried to improve light fastness through treatment with benzophenone ultraviolet absorber. The dyeing of wool fabrics using Zizania latifolia Turcz was good even without pretreatment or mordanting treatment. Optimal wool fabric dyeing conditions were colorant concentration of 200% (o.w.f.), dyeing temperature of $100^{\circ}C$, dyeing time of 80 minutes and a dye bath pH of 3. Color fastness of dyed wool fabrics to washing, rubbing, perspiration and light was 4-5, 5, 4-4-5 (acidic), 4-5 (alkaline) and 2 respectively. The results after treatment with ultraviolet absorber for improving the fastness of daylight were improved to 3-4 grade. The UV protection rate were increased after dyeing and the deodorization of ammonia gas improved to 98%. Bacterial reduction rate (Staphylococcus aureus) of wool fabrics was excellent at 99.9%. All dye fastness (except for light fastness) was excellent; in addition, the functionality of wool fabrics dyed with Zizania latifolia Turcz also improved. The results are expected to be applied to various fields because they indicate excellent results after treatment with ultraviolet absorber for improving the fastness of daylight.