• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.45 no.3
• /
• pp.271-282
• /
• 2012

Early osteological development of the skull, vertebral column, and fins, and squamation in the spotted sea bass, Lateolabrax maculates, were studied under extensive larval rearing conditions. The first ossification during cephalic skeleton development began with the premaxillary, dentary, and parasphenoid at 6.4 mm Total length (Notochord length 6.1 mm) and was completed by 25.2 mm TL (Standard length 20.3 mm). Ossification of the cartilaginous caudal complex started simultaneously in the urostyle and two preural centra at 12.2 mm TL (10.4 mm) and it was completely ossified by 32.0 mm TL (26.4 mm). The principal caudal fin rays, with a count of 9/8, began to ossify at 11.6 mm TL (10.2 mm) and the procurrent caudal fin rays, with counts of 4 (upper) and 3 (lower), started to ossify by 12.6 mm TL (10.9 mm). Ossification of these parts was completed by 21.4 mm TL (17.5 mm). Ossification of the vertebral column was first observed in the first to fourth centra at 8.3 mm TL (7.5 mm) and was fully completed by 21.7-35.0 mm TL (17.8-29.3 mm). The pectoral girdle started to ossify by 5.6 mm TL (5.4 mm) and was completed by 26.8 mm TL (21.8 mm). Eight pectoral fin rays were ossified at 11.6 mm TL (10.2 mm) and 16-18 rays were fully ossified by 13.8 mm TL (12.0 mm). Also, the dorsal, anal, and pelvic fin rays started to ossify at 12.2 mm TL (10.4 mm) and were completed by 12.8 mm TL (11.2 mm), 23.8 mm TL (19.4 mm), and 13.8 mm TL (12.0 mm), respectively. Ossification of the anal and dorsal pterygiophores initially occurred by 12.6 mm TL (10.9 mm) and 14.3 mm TL (12.2 mm), and was completed by 21.4 mm TL (17.5 mm) and 19.3 mm TL (15.9 mm), respectively. Squamation started at three centers of differentiation: the middle region of the trunk, the anterior of the caudal peduncle, and on the caudal peduncle at 23.8 mm TL (19.4 mm). The body was covered with scales, except the snout, at 57.2-60.2 mm TL (SL 47.1-49.2 mm).

• Journal of Yeungnam Medical Science
• /
• v.18 no.1
• /
• pp.123-137
• /
• 2001

Background: The purpose of this study is to evaluate the accuracy of measurements obtained from 3-dimensional computerized tomography and 3-dimensional cephalogram constructed by using the frontal and lateral cephalogram of six human dry skulls. Materials and Methods: After CT scans and each cephalograms were taken, 3-dimensional coordinates (X, Y, Z) of landmarks were obtained using computer programs. In this study, the accuracy of both methods were determined by means of 14 linear measurements compare with caliper measurements. Results: The standard deviation of landmarks of 3-dimensional CT and 3-dimensional cephalogram were 0.23 mm, and 0.30 mm in X axis, 0.27 mm and 0.25 mm in Y axis, and 0.27 mm and 0.31 mm in Z axis. In both methods, the standard deviation were less than 0.5 mm in all landmarks, and the most of landmarks showed less than 1 mm in range. Concerning the accuracy, the mean difference between 3-dimensional CT and manual measurements was 0.33 mm, and 1.13 mm between 3-dimensional cephalogram and manual measurements. The distance between RGo and LGo showed the largest difference (2.03 mm). There were highly significant, and large correlation with manual measurements in both methods (p<0.01). Conclusion: It is concluded that closeness of repeated measures to each skulls reveal the precision of both methods. Computerized tomography and cephalogram for 3-dimensional measurement of maxillofacial structure are equivalent in quality to caliper measurements.

• Asian Journal of Turfgrass Science
• /
• v.24 no.1
• /
• pp.16-23
• /
• 2010

Mowing is an important practice in golf course management. Mowing interval and height can affect net photosynthesis of turfgrass and finally shoot density, tillering, rooting and regrowth of turfgrass. The objectives of this study were to investigate the regrowth rate of zoysiagrass shoot under different mowing height for determination of proper mowing frequency. Recommended mowing interval were calculated by a rule that no more than 33% of the above ground height be removed in a single mowing. Daily shoot growth of zoysiagrass at 10 mm mowing height were 2.1~4.7 mm (July), 1.9~2.9 mm (August), 0.9~1.5 mm (September), and 0.6 mm (October). These results indicate that recommended mowing interval were 1.1~2.3 day for July, 1.7~2.4 day for August, 3.5~5.4 day for September, and 8.5 day for October, respectively. Daily shoot growth of zoysiagrass at 15 to 17 mm mowing height were 4.0~5.3 mm (July), 2.9~4.5 mm (August), 1.4~3.7 mm (September), and 1.3 mm (October). These results indicate that recommended mowing interval were 1.4~1.9 day for July, 1.7~2.5 day for August, 2.3~6.3 day for September, and 6.8 day for October, respectively. Daily shoot growth of zoysiagrass at 18 to 21 mm mowing height were 3.5~4.7 mm (July), 2.9~4.9 mm (August), and 1.5~1.8 mm (September). These results indicate that recommended mowing interval were 1.9~2.6 day for July, 1.8~3.1 day for August, and 5.9~7.0 day for September, respectively. Daily shoot growth of zoysiagrass at 50 mm mowing height were 4.6~4.9 mm (July), 5.0~6.5 mm (August), and 2.5~4.7 mm (September). These results indicate that recommended mowing interval were 5.1~5.4 day for July, 3.9~5.0 day for August, and 5.3~9.8 day for September, respectively.

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.6_1
• /
• pp.683-691
• /
• 2021

Bipolar plates with channel width of 0.5 mm, 0.4 mm, and 0.3 mm respectively were printed using a 3D printer. The shape of three b ipolar plates was rectangular, the channel depth was 0.5 mm, and the thickness of base was 0.5 mm. The bipolar plate with channel width of 0.5 mm had 45 channels, and their active area was 44.5 mm × 50 mm. The bipolar plate with channel width of 0.4 mm had 57 channels and its active area was 45.2 mm × 50 mm, and the bipolar plate with channel width of 0.3 mm had 75 channels and its active area was 44.7 mm × 50 mm. The bipolar plates were printed using PLA filament. The cross-sectional lengths of the bipolar plates with channel widths of 0.5 mm and 0.4 mm were identical by 96% of the designed cross-sectional length. Whereas the bipolar plate with a channel length of 0.3 mm had a large difference of 25% from the designed cross-sectional length.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.37 no.3
• /
• pp.105-112
• /
• 2009

This study has attempted to facilitate various new technologies related to indoor containers and develop a desirable planting environment after investigating the growth (including root growth) of shade-tolerant landscape plants under slit processing, a natural indoor ventilation system. The following results were found: In terms of the shoot growth of Fatsia japonica in a slit container, no distinctive difference was observed in comparison with the control group. However, growth was good when the container 250mm tall or taller. Therefore, it was verified that optical soil depth is more important than slit processing in shoot growth of Fatsia japonica. In Fatsia japonica root length was observed as follows: Control 2(250mm) > Slit 2(250mm) > Control 1(195mm) > Slit 3(360mm) > Control 3(360mm) > Slit 1(195mm). The largest growth was observed in Control 2(250mm), which had no slit processing. In term of root width, this was lower than the initial value in all groups, which means that the root grew vertically, not horizontally. In terms of plant height of Ophiopogon japonicus, a gradual increase was observed in the control group that had no slit processing. No significant growth was detected in the slit system, however. In terms of shoot number, slit containers were generally higher than the control group. In terms of fresh and dry weights, on the contrary, slit containers were mostly lower than the control group. In Ophiopogon japonicus, root length was observed as follows: Slit 2(250mm) > Slit 1(195mm) > Control 2(250mm) > Control 3(360mm) > Slit 3(360mm) > Control 1(195mm). In Ardisia japonica, slit containers were mostly greater than control group in terms of plant height. The greatest plant height was observed at Slit 2(250mm) instead of Slit 1(195mm) and Slit 3(360mm). Except for plant height and shoot number, however, no significant shoot and root growth was observed. Root length was observed as follows: Slit 2(250mm) > Slit 3(360mm) > Control 3(360mm) > Slit 1(195mm) > Control 2(250mm) > Control 1(195mm). Therefore, root length in slit containers was mostly greater than in the control group. The width of root, however, declined in general.

• Journal of radiological science and technology
• /
• v.30 no.4
• /
• pp.335-341
• /
• 2007

General anatomy classifies diaphragm as muscle of boundary between chest and abdomen, while radiology divides it into right and left hemidiaphragm, because it is more advantageous in radiological diagnosis on chest and abdomen. Based on these anatomic characteristics of diaphragm, this study aimed to measure the height and curvature of right and left diaphragm in simple chest radiography. As a result, this study came to the following conclusions : 1. For all subjects who joined this study, it was found that their mean transverse diameter in internal diameter of thorax(ID) amounted to 293.3 mm(min. 221.0 mm, max 335.3 mm). 2. For the right and left height of diaphragm, it was found that 81.4% showed higher right diaphragm ; 16.2% showed equivalent height between right and left diaphragm ; and only 2.4% showed higher left diaphragm. 3. For higher right diaphragm, it was found that the mean height of right diaphragm amounted to 15.2 mm(min. height = 2.0 mm, max. height = 41.7 mm). 4. For higher left diaphragm, it was found that the mean height of left diaphragm amounted to 11.5 mm(min. height = 4.7 mm, max. height = 30.4 mm). 5. The mean curvature of right diaphragm amounted to 22.9 mm(min. curvature = 10.4 mm, max. curvature = 37.3 mm). 6. The mean curvature of left diaphragm amounted to 22.4 mm(min. curvature = 11.3 mm, max. curvature = 42.2 mm). 7. For possible associations between ID and right/left diaphragm curvature, it was noted that ID was in significantly positive correlations with right diaphragm curvature(r= .427, p<.001) and left diaphragm curvature(r= .425, p<.001) on statistical level. 8. For possible associations between right and left diaphragm curvature, it was found that right diaphragm curvature was in significantly positive correlations with left diaphragm curvature(r= .403, p<.001).

• Journal of Periodontal and Implant Science
• /
• v.28 no.3
• /
• pp.517-523
• /
• 1998

The purpose of this study was to investigate the width of attached gingiva of young adults with healthy gingiva. We compared the differences according to the tooth location. The width of attached gingiva of maxilla and mandible was measured by histochemical method. The results were as follows: 1. The width of buccal keratinized gingiva in maxilla was widest in incisors(5.2-5.6mm) and narrowest in first bicuspids(4.4-4.5mm). 2. The width of buccal keratinized gingiva in mandible was widest in incisors(4.3-4.5mm) and narrowest in first bicuspids(3.2-3.3mm). 3. The width of lingual keratinized gingiva in mandible was widest in first molars(5.5-5.6mm) and narrowest in incisors(2.9-3.0mm). 4. The width of buccal attached gingiva in maxilla was widest in incisors(4.1-4.4mm) and narrowest in molars (3.0mm). 5. The width of buccal attached gingiva in mandible was widest in incisors(3.2-3.4mm) and narrowest in second molars (1.7-1.8mm). 6. The width of lingual attached gingiva in mandible was widest in first molars(3.5-3.7mm) and narrowest in incisors(1.9-2.1mm).

• Journal of the Korean Wood Science and Technology
• /
• v.24 no.4
• /
• pp.56-63
• /
• 1996

This study was to manufacture thinned wood of Larix leptolepis Gordon into Oriented Strand Board(OSB) with Urea-Formaldehyde Resin. The OSB was made of four kinds of strand in slenderness ratio 150 ; thickness $0.3{\pm}0.05mm$, $0.4{\pm}0.05mm$, $0.5{\pm}0.05mm$ and $0.6{\pm}0.05mm$, respectively length 45mm, 60mm, 75mm and 90mm. Target densities were 0.65gr/$cm^3$, 0.75gr/$cm^3$ and 0.85gr/$cm^3$. The stepwise 9 minutes-multi-pressing schedule in the maximum pressure 40kgf/$cm^2$, the minimum pressure 10kgf/$cm^2$ was applied for $400mm{\times}390mm{\times}12mm$ board at the temperature of $150^{\circ}C$ in a hot press. In MOR The OSB of thin strand thickness $0.3{\pm}0.05mm$(length 45mm) and density 0.85gr/$cm^3$ was the highest. The strand thickness had more effect on MOR than the strand length. In strand thickness $0.4{\pm}0.05mm$(length 60mm) and density 0.85gr/$cm^3$ was the highest MOE. The strand thickness and length had adverse effects on MOE each other. At internal bonding. The OSB of strand thickness $0.3{\pm}0.05mm$(length 45mm) and board density 0.75gr/$cm^3$ showed the highest value. OSB had higher IB value with thinner strand thickness. The thinner strand thickness showed the lower thickness swelling in turn $0.3{\pm}0.05mm$(length 45mm), $0.4{\pm}0.05mm$(length 60mm), $0.5{\pm}0.05mm$(length 75mm). $0.6{\pm}0.05mm$(length 90mm). Target densities 0.75gr/$cm^3$ 0.65gr/$cm^3$, 0.85gr/$cm^3$ showed in turn lower value. Finally, The OSB made of thinned wood of Larix leptolepis Gordon showed good results in laboratory experiment.

• Journal of Bio-Environment Control
• /
• v.13 no.3
• /
• pp.178-184
• /
• 2004

This study carried out to develope the vision system which automatically finds out a optimum transferring period of plants (Perilla, Platycodon grandifloums and Lactuca sativa) by using image process-ing. This system mearsured a height, long diameter and short diameter of the three plants with 20 replications. Following results were obtained on each plant. Compared with real data to be measured by hand with the vernier calipers, height, long diameter and short diameter of Perilla showed 0.5 mm average error rate with 1.7%, 4.7 mm average error rate with 3.9% and 5.5 mm average error rate with 6.9% respectively. Those of Platycodon grandifloums showed 2.4 mm with 8.1%, 3.4 mm with 7.2% and 4.0 mm with 10.4% respectively. Those of Lactuca sativa showed 4.0 mm with 9.1 %,3.4 mm with 7.2% and 3.6 mm with 9.4% respectively. The system could be used to transfer accurately the plant seedling, if the system were improved enough to reduce error rate for the optimum transferring period of a plant in the greenhouse.

• The Journal of the Korea Contents Association
• /
• v.12 no.7
• /
• pp.247-254
• /
• 2012

This study presents the assessment results of coil length characteristics according to the volume of cerebral artery among the inpatients that received angiography and coil embolization following intracranial aneurysm from March, 2010 to September 2011. The volume rendering method was applied to the patients that received embolization to their cerebral arteries to obtain volume measurements. After coil embolization, the volume ratios were calculated with the volumes and lengths of coils. The embolic volume ratios were $43.11{\pm}3.11%$, $36.07{\pm}2.03%$, 40.91%, and 38.25% when the aneurysm sizes were 6mm or less, 6~10mm, 10~15mm and 20mm or more, respectively, being similar to the recommended volume ratios. Regardless of the types of aneurysm, the coil length according to volume was 0.65cm per $1mm^3$ of 20~$100mm^3$ when one type of 0.25mm diameter coil was used. They were 0.62cm per $1mm^3$ of 20~$150mm^3$ when one type of coil was used in the aneurysm volume of the saccular type and 0.60cm per $1mm^3$ of 20~$90mm^3$ when one type of coil was used in the aneurysm volume of the multi-lobulated type.