• Journal of Gastric Cancer
• /
• v.7 no.4
• /
• pp.206-212
• /
• 2007

Purpose: The number of laparoscopy assisted distal gastrectomies (LADG) is gradually increasing for the treatment of early gastric cancer (EGC) patients as a surgical modality for improving quality of life. However, there are few reports on laparoscopy-assisted total gastrectomy (LATG), mainly because this procedure is performed relatively infrequently, and the procedure is more complicated than LADG. This study was performed to evaluate the technical feasibility, safety, and surgical results of LATG with lymphadenectomy through a review of our experience. Materials and Methods: From July 2003 to June 2007, 77 LATG with Roux-en-Y esophagojejunostomy were performed for patients with a preoperative diagnosis of EGC. The clinicopathological features and surgical outcomes were analyzed. Results: There were 49 males and 28 females in the study with a mean age of 61 years (range $30{\sim}85$ years). The mean operation time was 210 minutes (range $100{\sim}400$ minutes) and the operation time was gradually decreased as the case numbers increased. There were 13 operative morbidities (16.9%) and no operative mortalities. The restoration of bowel motility was noted at 3.2 postoperative days; a soft diet was started at 4.4 postoperative days and the duration of hospital stay was 10 days. There were 20 mucosal lesions, 32 submucosal lesions, 15 proper muscle lesions, 7 subserosal lesions and 3 serosal lesions. A total of 20 patients were treated by D2 lymph node dissection, 55 patients were treated by D1+$\beta$ lymph node dissection, and two patients were treated by D1+$\alpha$ lymph node dissection. The mean number of retrieved lymph nodes was 42 (range $11{\sim}86$). Lymph node metastases were noted in 12 patients. Conclusion: This study indicated LATG could be applied safely and effectively for patients with EGC. However, a prospective study comparing laparoscopy-assisted versus open gastrectomy for short-term and long-term surgical outcome is needed.

• Journal of Wetlands Research
• /
• v.23 no.3
• /
• pp.201-212
• /
• 2021

In wetland protection areas, a phytosociological research was conducted on willow forests, which plays an important ecological and environmental role and is the main material for ecological restoration. A total of 61 relevés were collected according to the Z-M(Zürich-Montpellier) school's method and the characteristics of plant communities and the composition of the species were identified. A total of 9 plant communities including 237 taxa were differentiated. Willow species showing the high r-NCD(relative net contribution degree) value in study areas were Salix koriyanagi, Salix chaenomeloides, Salix triandra subsp. nipponica, Salix gracilistyla and Salix pierotii. Poaceae was the most diverse in species, followed by Asteraceae, Apiaceae, Polygonaceae and Fabaceae. Life form type of willow forests in wetland protection areas was determined to be Th(therophytes)-R₅(non-clonal form)-D₄(clitochores)-e(erect form) type. The naturalized plants and invasive alien species were identified as 24 taxa and 4 taxa, respectively. Naturalized and disturbance indices were 10.1% and 41.4%, respectively. The results of the site-species ordination by Non-Metric Multidimensional Scaling(NMDS), wetland types and altitude gradient were the main ecological factors determining the spatial distribution of plant communities. Diversity index and evenness index were high in mountainous palustrine wetlands with relatively high altitude, and the disturbance index, naturalized index and appearance rate of annual plant were high in riverine and lacustrine wetlands with low altitude.

• Journal of Korean Society on Water Environment
• /
• v.33 no.4
• /
• pp.449-459
• /
• 2017

In Geum River of Korea, three multi-purpose weirs were built at the downstream of Daecheong Reservoir during the Four Major River Restoration Project (FMRRP). The weirs have altered the hydraulic characteristics of the river, and consequently transformed the large areas of flowing ecosystem to deep and wide stagnant environment. In every summer, a thermal stratification occurred near the Baekje Weir having mean depth of 4.0 m, and the surface algal blooms dominated by buoyant cyanobacteria have been frequently formed after the FMRRP. The objective of this study was to investigate the relationship between flow velocity and thermal stability of the waterbody using a three-dimensional (3D) hydrodynamic model (EFDC+) after calibration against the thermistor chain data obtained in 2014. A new Sigma-Zed vertical grid system of EFDC+ that minimize the pressure gradient errors was used to better simulate the thermodynamics of the waterbody. The model reasonably simulated the vertical profiles of the observed water temperatures. The vertical mean flow velocity and the Richardson Number (Ri) that represents the stability of waterbody were estimated for various management water levels and flow rates scenarios. The results indicated that the thermal stability of the waterbody is mostly high ($Ri{\gg}0.25$) enough to establish stratification, and largely depend on the flow velocity. The critical flow velocity that can avoid a persistent thermal stratification was found to be approximately 0.1 m/s.

• The Journal of Advanced Prosthodontics
• /
• v.9 no.4
• /
• pp.252-256
• /
• 2017

PURPOSE. This in vitro study aimed to analyze and compare the reproducibility of zirconia and lithium disilicate crowns manufactured by digital workflow. MATERIALS AND METHODS. A typodont model with a prepped upper first molar was set in a phantom head, and a digital impression was obtained with a video intraoral scanner (CEREC Omnicam; Sirona GmbH), from which a single crown was designed and manufactured with CAD/CAM into a zirconia crown and lithium disilicate crown (n=12). Reproducibility of each crown was quantitatively retrieved by superimposing the digitized data of the crown in 3D inspection software, and differences were graphically mapped in color. Areas with large differences were analyzed with digital microscopy. Mean quadratic deviations (RMS) quantitatively obtained from each ceramic group were statistically analyzed with Student's t-test (${\alpha}=.05$). RESULTS. The RMS value of lithium disilicate crown was $29.2\;(4.1){\mu}m$ and $17.6\;(5.5){\mu}m$ on the outer and inner surfaces, respectively, whereas these values were $18.6\;(2.0){\mu}m$ and $20.6\;(5.1){\mu}m$ for the zirconia crown. Reproducibility of zirconia and lithium disilicate crowns had a statistically significant difference only on the outer surface (P<.001). The outer surface of lithium disilicate crown showed over-contouring on the buccal surface and under-contouring on the inner occlusal surface. The outer surface of zirconia crown showed both over- and under-contouring on the buccal surface, and the inner surface showed under-contouring in the marginal areas. CONCLUSION. Restoration manufacturing by digital workflow will enhance the reproducibility of zirconia single crowns more than that of lithium disilicate single crowns.

• Restorative Dentistry and Endodontics
• /
• v.22 no.1
• /
• pp.447-463
• /
• 1997

The purpose of this study was to evaluate the effectiveness of copal varnish and five bonding agents(Scotchbond Multi-Purpose Plus Dental Adhesive System, Panavia 21, All Bond 2, Superbond D-Liner II plus, Fuji Duet) in reducing microleakage under amalgam restorations. Class V cavity were prepared on both buccal and lingual surface of sixty extracted human molars with cementum margin and were filled with different kinds of liners and amalgam. All teeth were stored at $37^{\circ}C$ in physiologic saline solution. After 1 week they were thermally stressed for 500 cycles between 5 and $55^{\circ}C$ in baths containing 0.5 % basic fuchsin dye. The dye penetrations were observed with a stereomicroscope. Scanning electron micrographs were taken of representative tooth sections from each group to assess the nature of the tooth/liner/amalgam interface. The statistical test were applied to the results using a one way analysis variance (ANOVA) and Duncan's multiple range test. The results were as follows ; 1. In all groups, the enamel margin showed significantly lower leakage value than the cementum margin (p<0.05). 2. At the dentin and enamel margins, the leakage value of Copalite-lined group showed significantly higher than that of no liner group (p<0.05), but showed significantly lower than that of bonding agent lined-groups (p<0.05). 3. There was no significant difference between the bonding agent lined-groups (p>0.05). 4. On the backscattered scanning electron microscopy observation, discontinuous gaps were observed between amalgam and dentin in the bonding agent-lined amalgam restorations and the bonding agents appeared to fill the gap space and were mixed with amalgam particles. At the amalgam/tooth interface, unsealed dentin and continuous gaps were found in both unlined and Copalite-lined restorations.

• Applied Chemistry for Engineering
• /
• v.16 no.4
• /
• pp.549-555
• /
• 2005

To evaluate the posterior and anterior restoration of polymeric dental restorative composite (PDRC), PDRC was prepared using a silica filler treated by heat at various temperatures. Compressive strength (CS) and diametral tensile strength (DTS) values were investigated to study the effect of a heat-treated silica on the mechanical properties of PDRC using the recommended dental specifications. Both the particle size and specific volume of silica were decreased upon increasing the heat treatment temperature. CS and DTS values of PDRC containing a heat-treated silica showed 1.2 and 1.3 times, respectively, higher than that of the PDRC containing a neat silica. Also, it was found that the lower heat treatment temperature, the better mechanical properties of PDRC were observed because there was less agglomeration between silica particles. Specially, PDRC using a silica treated at $600^{\circ}C$ showed superior mechanical strength.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.11a
• /
• pp.4-4
• /
• 2012

Proteins enable biology to be viable through molecular interactions (such as in antigen-antibody, ligand-receptor, and drug-target) with

• The Journal of Advanced Prosthodontics
• /
• v.8 no.6
• /
• pp.489-493
• /
• 2016

PURPOSE. This in-vitro study aimed to evaluate the fracture resistances and failure modes of endodontically treated mandibular premolars restored with endocrowns and conventional post-core retained crowns. MATERIALS AND METHODS. Thirty mandibular premolars were assigned into three groups (n=10): GI, intact teeth; GE, teeth with endocrowns; GC, teeth with conventional post-core supported crowns. Except for the teeth in group GI, all specimens were cut to 1.5 mm above the cementoenamel junction and endodontically treated. Both endocrowns and conventional crowns were fabricated from lithium-disilicate blocks using a CEREC 3D CAD/CAM unit. All specimens were subjected to thermocycling and then to $45^{\circ}$ oblique compressive load until fracture occurred. The fracture resistance and failure mode of each specimen were recorded. Data were analyzed with one-way ANOVA and LSD Post Hoc Test (${\alpha}=.05$). RESULTS. The fracture resistances of GE and GC were significantly lower than that of GI (P<.01), while no significant difference was found between GE and GC (P=.702). As of the failure mode, most of the specimens in GE and GC were unfavorable while a higher occurrence of favorable failure mode was presented in GI. CONCLUSION. For the restoration of mandibular premolar, endocrown shows no advantage in fracture resistance when compared with the conventional method. Both of the two methods cannot rehabilitate endodontically treated teeth with the same fracture resistances that intact mandibular premolars have.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.107-107
• /
• 2019

하천은 과거부터 현재까지 인간의 삶에 있어서 중요한 공간이며 환경적, 생태적으로도 중요한 가치를 지니고 있다. 특히, 하천은 물과 흙으로 이루어져 있기 때문에 수생물이 살아갈 수 있는 독특한 생태 서식처 공간을 제공한다. 국내에서는 1980년대 말부터 하천환경의 개선 및 복원에 대해 관심과 인식을 높이고 공감대를 형성하여 훼손된 하천을 원래 모습으로 되돌리는 사업을 수행하였다. 이러한 하천복원사업이 하천에 서식하는 수생물의 어떠한 영향을 주는지 분석하기 위해 최근에는 다양한 물리서식처 분석이 수행되고 이를 통해 각종 복원계획을 수립하고 있다. 하천복원사업을 통한 생태유량 재산정, 보 철거의 영향, 다양한 복원기법을 통한 수생물에 미치는 영향 파악 등을 들 수 있다. 그러나 이러한 기존 연구들은 하천복원사업으로 인한 수리특성과 수생 서식처의 변화를 살펴보는 간접적인 영향에 대한 내용이었다. 그러나 직접적으로 영향을 미치는 하도의 단면을 재설계하고 다양한 복원기법을 적용하여 그 영향을 파악하는 연구도 수행되어야 할 것으로 판단된다. 본 연구는 수리학적으로 유리한 저수로 물길 조성 및 다양한 저수로 조성기법의 적용을 통해 우점종의 서식처에 미치는 영향에 대해 원주천을 대상으로 물리서식처 분석을 수행하였다. 대상구간은 원주천 중 상류에 위치한 900 m 구간으로, 대상 어종은 원주천의 중 상류에 서식하는 우점종인 참갈겨니를 목표로 하였다. 수리분석과 서식처분석은 각각 River2D 모형과 서식처 적합도 모형을 사용하였다. 서식처 적합도 모형에 사용된 서식처 적합도 곡선은 Gosse (1982)의 방법을 이용하여 구축하였으며, 수심, 유속, 기층을 모두 고려하여 물리 서식처 분석을 수행하였다. 저수로 물길 복원 조성을 위하여 수리학적으로 유리한 저수로 단면으로의 복원 및 거석, 여울/소 구조, 단면의 확폭을 통해 기존 자연형 하천과는 다른 복원을 조성하였다. 수리학적으로 유리한 저수로 물길 복원을 조성한 결과를 이용하여 물리서식처 분석을 수행하였을 때, 기존 자연하천인 현상태 대비 약 37% 가중가용면적이 악화되는 것으로 나타났다. 그러나 수리학적으로 유리한 저수로 단면의 설계 조건에서 거석, 여울/소 구조 및 단면의 확폭의 복원을 수행하였을 때 서식처가 최소 약 3%에서 최대 21%까지 가중가용면적이 향상되었다.

• Journal of Conservation Science
• /
• v.37 no.4
• /
• pp.362-369
• /
• 2021

In museums, exhibition content focuses mostly on cultural heritage's historical values and functions, but doing so tends to limit visitors' interest and immersion. To counter this limitation, the study developed an experiential media art exhibition fusing bronze mirrors' traditional production technology and modern conservation science. First, for the exhibition system, scientific cultural heritage contents were projected on the three-dimensional (3D) printed bronze mirror through interactions between motion recognition digital information display (DID) and the projector. Then, a scenario of 17 missions in four stages (production process, corrosion mechanism, scientific analysis and diagnosis, and conservation treatment and restoration) was prepared according to the temporal spectrum. Additionally, various media art effects and interaction technologies were developed, so visitors could understand and become immersed in bronze mirrors' scientific content. A user test was evaluated through the living lab, reflecting generally high levels of satisfaction (90.2 points). Qualitative evaluation was generally positive, with comments such as "easy to understand and useful as the esoteric science exhibition was combined with media art" (16.7%), "wonderful and interesting" (11.7%), and "firsthand experience was good" (9.2%). By combining an esoteric science exhibition centered on principles and theories with visual media art and by developing an immersive directing method to provide high-level exhibition technology, the exhibition induced visitors' active participation. This exhibition's content can become an important platform for expanding universal museum exhibitions on archaeology, history, and art into conservation science.