• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.04a
• /
• pp.71-74
• /
• 2009

The data-flow paradigm has been employed in various application areas. It is particularly useful where large data-streams must be processed, for example in video and audio processing, or for scientific visualization. A video-based 3D reconstruction system should process multiple synchronized video streams. The system exhibits many properties that can be targeted using a data-flow approach that is naturally divided into a sequence of processing tasks. In this paper we introduce our concept to apply the data-flow approach to a multi-video 3D reconstruction system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.1
• /
• pp.127-135
• /
• 2006

The image-based 3D modeling is the technique of generating a 3D graphic model from images acquired using cameras. It is being researched as an alternative technique for the expensive 3D scanner. In this paper, I propose the image-based 3D modeling system using calibrated camera. The proposed algorithm for rendering 3D model is consisted of three steps, camera calibration, 3D shape reconstruction and 3D surface generation step. In the camera calibration step, I estimate the camera matrix for the image aquisition camera. In the 3D shape reconstruction step, I calculate 3D volume data from silhouette using pyramidal volume intersection. In the 3D surface generation step, the reconstructed volume data is converted to 3D mesh surface. As shown the result, I generated relatively accurate 3D model.

• Journal of Biomedical Engineering Research
• /
• v.19 no.2
• /
• pp.189-198
• /
• 1998

3D medical image reconstruction techniques are useful to figure out complex 3D structures from the set of 2D sections. In the paper, 3D medical image reconstruction system is constructed under PC environment and programmed based on modular programming by using Visual C++ 4.2. The whole procedures are composed of data preparation, gradient estimation, classification, shading, transformation and ray-casting & compositing. Three speed optimization techniques are used for accelerating 3D medical image reconstruction technique. One is to reduce the rays when cast rays to reconstruct 3D medical image, another is to reduce the voxels to be calculated and the other is to apply early ray termination. To implement 3D medical image reconstruction system based on PC, speed optimization techniques are experimented and applied.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.12
• /
• pp.2943-2948
• /
• 2015

Run 3D reconstruction using a single camera, based on the information, we are advancing research on driving assistance apparatus or can be informed how to pass the obstacle existing ahead the driver. As a result depth information falls but it is possible to provide information that can pass through an obstacle on the straight. For 3D reconstruction by measuring the internal parameters, it calculates the Fundamental matrix and matching to find the feature points obtained by executing the triangulation on the basis of this. When the through experiments try to confirm the results, the depth information is present error information in the X and Y axes which can determine whether or not to pass through an obstacle has reliability.

• Fashion & Textile Research Journal
• /
• v.22 no.1
• /
• pp.11-24
• /
• 2020

This research examines pattern production of 3 men's costumes in the second half of 19th century by 3D reconstruction to reveal technical aspects of mail costumes. The steps are as follows. First, an examination of selective type according to research study. Second, a pattern analysis of 3 historical male tops of 19th century referred to 9 pattern books of the France National Library collection. Third, a categorized type analysis that referred to paintings of the Musée d'Orsay collection. Fourth, a measurement and structure research of 3 historical garments of Fashion and Textile Museum collection. Fifth, the pattern making and fitting by 3D simulation. Research discussed the following subjects and results. First, main type of men's coat can be categorized by frac, redingote, jaquette, and veston. Second, the male costume pattern contained in pattern books was researched along with distinguished silhouettes and structures; X silhouette for frac and redingote, H silhouette for jaquette, and straight box silhouette for veston. Third, based on the analysis of representative type of men's costume per period conducted previous studies, 2 redingotes and a jaquette in the museum were selected and compared to other data such as image materials. Last, the following process was conducted for reconstruction; 'Drawing diagram-Primary pattern drafting by measurement value-3D virtual fitting-Checking the fit-Modification and complement'. We also obtained a 3D virtual reconstruction and a 2D research pattern that suggested a costume pattern by each type along with 3D reconstruction that included insights for male coat techniques of 19th century France.

• Proceedings of the IEEK Conference
• /
• 2003.11a
• /
• pp.183-186
• /
• 2003

A vision sensor should be calibrated prior to infer a Euclidian shape reconstruction. A point to point calibration. also referred to as a hard calibration, estimates calibration parameters by means of a set of 3D to 2D point pairs. We proposed a new method for determining a set of 3D to 2D pairs for the structured light hard calibration. It is simply determined based on epipolar geometry between camera image plane and projector plane, and a projector calibrating grid pattern. The projector calibration is divided two stages; world 3D data acquisition Stage and corresponding 2D data acquisition stage. After 3D data points are derived using cross ratio, corresponding 2D point in the projector plane can be determined by the fundamental matrix and horizontal grid ID of a projector calibrating pattern. Euclidian reconstruction can be achieved by linear triangulation. and experimental results from simulation are presented.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1695-1700
• /
• 2005

In this paper, we propose an optimal thresholding method for the voxel coloring in the reconstruction of a 3D shape. Our purposed method is a new approach to resolve the trade-off error of the threshold value on determining the photo-consistency in the conventional method. Optimal thresholding value is decided to compare the surface voxel of photo-consistency with inside voxel on the optic ray of the center camera. As iterating the process of the voxels, the threshold value is approached to the optimal value for the individual surface voxel. And also, graph cut method is reduced to the surface noise on eliminating neighboring voxel. To verify the proposed algorithm, we simulated in the virtual and real environment. It is advantaged to speed up and accuracy of a 3D face reconstruction by applying the methods of optimal threshold and graph cut as compare with conventional algorithms.

• Journal of Mechanical Science and Technology
• /
• v.20 no.12
• /
• pp.2034-2042
• /
• 2006

In this study, a complete 3D surface reconstruction method is proposed based on the concept that the vertices, of surface model can be completely matched to the unstructured point cloud. In order to generate the initial mesh model from the point cloud, the mesh subdivision of bounding box and shrink-wrapping algorithm are introduced. The control mesh model for well representing the topology of point cloud is derived from the initial mesh model by using the mesh simplification technique based on the original QEM algorithm, and the parametric surface model for approximately representing the geometry of point cloud is derived by applying the local subdivision surface fitting scheme on the control mesh model. And, to reconstruct the complete matching surface model, the insertion of isolated points on the parametric surface model and the mesh optimization are carried out. Especially, the fast 3D surface reconstruction is realized by introducing the voxel-based nearest-point search algorithm, and the simulation results reveal the availability of the proposed surface reconstruction method.

• ETRI Journal
• /
• v.27 no.6
• /
• pp.708-712
• /
• 2005

We propose a computational reconstruction technique in large-depth integral imaging where the elemental images have information of three-dimensional objects through real and virtual image fields. In the proposed technique, we reconstruct full volume information from the elemental images through both real and virtual image fields. Here, we use uniform mappings of elemental images with the size of the lenslet regardless of the distance between the lenslet array and reconstruction image plane. To show the feasibility of the proposed reconstruction technique, we perform preliminary experiments and present experimental results.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.519-521
• /
• 2003

Within the paper an approach for the automatic extraction and reconstruction of buildings in urban built-up areas base on fusion of high-resolution satellite image and LIDAR data is presented. The presented data fusion scheme is essentially motivated by the fact that image and range data are quite complementary. Raised urban objects are first segmented from the terrain surface in the LIDAR data by making use of the spectral signature derived from satellite image, afterwards building potential regions are initially detected in a hierarchical scheme. A novel 3D building reconstruction model is also presented based on the assumption that most buildings can be approximately decomposed into polyhedral patches. With the constraints of presented building model, 3D edges are used to generate the hypothesis and follow the verification processes and a subsequent logical processing of the primitive geometric patches leads to 3D reconstruction of buildings with good details of shape. The approach is applied on the test sites and shows a good performance, an evaluation is described as well in the paper.