• Journal of the Korean Ceramic Society
• /
• v.35 no.3
• /
• pp.287-293
• /
• 1998

The effects of B2O3 addition on the sintering behavior and th microwave dielectric properties of $(Mg_{0.93}Ca_{0.07})TiO_3$ ceramics were investigated. By addition of $B_2O_3$, increases the density of the ceramics increases and grain growth enhances, It was densified to over 94% of $(Mg_{0.93}Ca_{0.07})TiO_3$ theoretical density by the addition of 0.15-1.0wt% B2O3 and stable microwave dielectric properties observed by the addition of 0.2-0.4wt% $B_2O_3.\;(Mg_{0.93}Ca_{0.07})TiO_3$ ceramics sintered at $1200^{\circ}C$ exhibits maximum dielectric constants of 24-25 quality factor($Q{\times}f$) of more than 70000 and temperature coefficient of resonant frequency of $0\;ppm/^{\circ}C$ by adding of 0.15-0.4wt% $B_2O_3$.

• New & Renewable Energy
• /
• v.3 no.1 s.9
• /
• pp.54-59
• /
• 2007

A sintering aid, $B_{2}O_{3}$ have been included into a $LiAlO_{2}$ electrolyte support by a tape casting method in order to reinforce mechanical strength of the support for molten carbonate fuel cells [MCFCs). Starting idea originates from the low melting point of $B_{2}O_{3}$ ($450^{\circ}C$), which can provide the low temperature consolidation of ceramic materials. The mechanical properties and the microstructure changes of the $B_{2}O_{3}$-included electrolyte support were examined by scanning electron microscope, mercury porosimetry, X-ray powder diffraction [XRD], high temperature differential scanning calorimeter and three-point bending strength measurement. The mechanical strength was clearly improved by addition of $B_{2}O_{3}$. The increase of mechanical strength results from the neck growth of a new $LiAlO_{2}$ phase between $LiAlO_{2}$ particles by the liquid phase sintering. Average pore size and porosity of the electrolyte support reinforced by addition of the sintering aid, $B_{2}O_{3}$, was $0.24{\mu}m$ and 59%, respectively which were suitable microstructure of a matrix for an application of MCFCs.

• Archives of Pharmacal Research
• /
• v.20 no.3
• /
• pp.291-296
• /
• 1997

The studies were carried out to evaluate the constituents in the aerial part of Isodon excisus var. coreanus (Labiatae). From the aqueous fraction of methanol extract, compound I (${\alpha}$-[[3-(3, 4-dihydroxyphenyl)-1-oxo-2-propenyl]oxy]-3,4-dihydroxy-benzenepropanoic acid), compound II (9-methyl-dihydroferulic acid-4-O-.betha.-D-glucopyranosyl $(1{\rightarrow}2)$-${\alpha}$-L- rhamnopyranosyl (1.rarw.4)-.betha.-D-glucopyranoside), compound III (ent-7.alpha., 11${\alpha}$,15.betha.-trihydroxy-kaur-16-en-1-O-.betha.-D-glucopyranoside) and compound IV ($2{\alpha}$,3${\beta}$,$7{\alpha}$,23-tetrahydroxy-olean-12 -en-28-oic acid 28-O-${\beta}$-D-glucopyranoside) were isolated and identified on the basis of their physicochemical and spectroscopic evidences[IR, FAB(-)MS,$^{1}H-NMR,$$^{13}C-NMR,$$ HMQC$$^{1}H-^{1}H $COSY and HMBC (Heteronuclear Multiple Bond Connectivity)]. Especially, New compounds II and III were named Isodonin A and Isodonin B respectively.

• YAKHAK HOEJI
• /
• v.50 no.6
• /
• pp.403-408
• /
• 2006

1-Amino-5,6-dimethoxyindan hydrochloride was synthesized from 3- (3,4-dirnethoxyphenyl)propionic acid by intramolecular Friedel-Crafts acylation, oximation with hydroxylamine, and reduction with an overall yield of 74%. 2-Amino-5,6-dimethoxyindan hydrochloride was synthesized from 3-(3,4-dirnethoxyphenyl)propionic acid by intramolecular Friedel-Crafts acylation, oximation with isoamylnitrite, reduction in NaOH and reaction with HCI to form 5,6-dimethoxy-2-indanone, which was reacted with hydroxylamine and reduced with an overall yield of 42%. 5,6-Dimethoxyindan-1,2-dione-2-oxime, which was catalytically hydrogenated to afford cis-, and trans-1-amino-5,6-dimethoxyindan-1-ol as 3 : 1 ratio. This mixture was treated with Li and reacted with chloroacetyl chloride. Cis isomer was acylated and cyclized to synthesize rir -( ${\pm}$ )-7,8-dimethoxy-4,4a,5,9b-tetrahydroindeno[1,2-b][1,4]oxazin-3(2H)-one, but trans isomer was just acylated to form amide.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.6
• /
• pp.1-7
• /
• 1998

In this paper, SMD type backward wave 3dB coupler for PCS basestation application was designed, fabricated and measured. We designed that it could be replaced for commercial basestation system and it was 0.56 $\times$ 0.35 inches size. The test results show that coupler is well operated within frequency range of 1.75 ~ 1.98GHz, which is defined on PCS system. The coupler reveals insertion loss 0.295dB, isolation -30.31dB, amplitude balance 0.05dB, phase balance 0.02$^{\circ}$, input and output impedance matching -30.38dB, -39.72dB, respectively.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.1
• /
• pp.63-71
• /
• 2005

Equilibrium geometries, electronic structures, and energies of borocarbon clusters (binary compounds of carbon and boron), an unexplored class of molecules with highly unusual characteristics and potential for further development, have been investigated by means of B3LYP/6-311+G$^*$ density functional theory computations. A large number of B$_7$C${_1}^{1-}$, B$_6C_2$, and B$_5C_{3}\,^{1+}$ clusters with planar and non-planar monocyclic and polycyclic rings, as well as cage structures, have been systematically studied. Unexpectedly, planar forms are predicted not only to be the most stable structures, but also, in many cases, to have unprecedented planar heptacoordinate boron (p-heptaB) and planar heptacoordinate carbon (p-heptaC) arrangements. All these pheptaB and p-heptaC have 6π electrons and are aromatic according to the nucleus independent chemical shift (NICS). This novel bonding pattern is analyzed in terms of natural bond orbital (NBO) analysis. For virtually all possible B$_7$C${_1}^{1-}$, B$_6C_2$, and B$_5C_{3}\,^{1+}$ combinations, the p-heptaB arrangements are the more stable than other type structures.

• Journal of Nutrition and Health
• /
• v.34 no.4
• /
• pp.426-432
• /
• 2001

Vitamin B(sub)12(cobalamin) is an essential nutrient in human and it is particularly important during pregnancy. Nevertheless very few studies have reported, concerning vitamin B(sub)12 in relation with reproduction. This study was conducted to evaluate the vitamin B(sub)12 nutrition status of Korean pregnant women and to investigate the relationship between serum vitamin B(sub)12 levels of maternal-umbilical cord blood and pregnancy outcomes. Dietary vitamin B(sub)12 intakes of the pregnants were estimated by semiquantitative frequency questionnaire. Serum vitamin B(sub)12 levels in both maternal blood and umbilical cord blood of 30 pregnant women at delivery were measured by radioimmunoassay. Mean vitamin B(sub)12 intake was 3.3$\pm$1.4$\mu\textrm{g}$/d which was 125.8% of the Korean RDA(2.6$\mu\textrm{g}$) for vitamin B(sub)12 level of umbilical cord blood was 607.8$\pm$282.9pg/ml, more than two fold of maternal vitamin B(sub)12 level 268.6$\pm$97.8pg/ml. This finding indicates that fetal uptake of vitamin B(sub)12 in the fetus may be due to an active transport mchanism across the placenta. Umbilical cord blood vitamin B(sub)12 levels were highly correlated with maternal levels($r^2$=0.548, p<0.001), showing that fetal vitamin B(sub)12 level is affected by maternal status. However there was no significant correlation between the serum vitamin B(sub)12 levels in maternal-umbilical cord blood and the pregnancy outcomes except for the birth weight. Maternal-umbilical serum vitamin B(sub)12 levels were the highest in the group of birth weight 3.0-3.5kg, and the lowest in the group of birthweight below 3.0kg. (Korean J Nutrition 34(4) : 426~432, 2001)

• BMB Reports
• /
• v.43 no.11
• /
• pp.744-749
• /
• 2010

The aim of this work was to determine whether intrinsically bent DNA sites are present at, or close to, the mammalian replication origins oriGNAI3 and oriB in the Chinese hamster AMPD2 locus. Using an electrophoretic mobility shift assay and in silico analysis, we located four intrinsically bent DNA sites (b1 to b4) in a fragment that contains the oriGNAI3 and one site (b5) proximal to oriB. The helical parameters show that each bent DNA site is curved in a left-handed superhelical writhe. A 2D projection of 3D fragment trajectories revealed that oriGNAI3 is located in a relatively straight segment flanked by bent sites b1 and b2, which map in previously identified Scaffold/Matrix Attachment Region. Sites b3 and b4 are located approximately 2 kb downstream and force the fragment into a strong closed loop structure. The b5 site is also located in an S/MAR that is found just downstream of oriB.

• Journal of dental hygiene science
• /
• v.22 no.3
• /
• pp.156-163
• /
• 2022

Background: This study attempted to apply resin infiltrant (RI) as a method to maintain the effect of tooth bleaching treatment and compared it with fluoride varnish (FV) or artificial saliva to evaluate the effect. Methods: Sixty healthy lozenge specimens were classified into five groups. Group 1 was the negative control group, and discoloration was induced after artificial saliva treatment of the tooth specimen (G1_S+C). Group 2 was a positive control group, in which pigmentation was induced after bleaching treatment and artificial saliva treatment (G2 _B+S+C). Coloration was induced in group 3 (experimental group 1) after bleaching treatment and artificial saliva treatment, followed by application of fluorine varnish (G3_B+FV+S+C). Coloration was induced in Group 4 (experimental group 2) after applying RI after bleaching treatment and artificial saliva treatment (G4_B+RI+S+C). Pigmentation was induced in group 5 (experimental group 3) after bleaching treatment and artificial saliva treatment, followed by acid treatment (etching) and treatment with RI (G5_B+E+RI+S+C). Coffee and wine were used to induce discoloration. The lightness value (L^*) of the CIE L^*a^*b^* color system was obtained by image analysis. Kruskal-Wallis H analysis was performed for the mean difference in L^* values by group. Results: When coloration was induced with coffee, there was no significant difference in L^* value between artificial saliva (G2 _B+S+C), FV (G3_B+FV+S+C), and RI (G4_B+RI+S+C, G5_B+E+RI+S+C) groups. There was no significant difference in L^* values between the artificial saliva (G2 _B+S+C), FV (G3_B+FV+S+C), and RI (G4_B+RI+S+C, G5_B+E+RI+S+C) groups, even in the case of wine induced coloration. Conclusion: It was confirmed that artificial saliva or RI treatment had similar effects to the FV previously used to maintain the effect of tooth bleaching treatment.

• Journal of Microbiology and Biotechnology
• /
• v.24 no.12
• /
• pp.1609-1621
• /
• 2014

The plant pathogen Burkholderia gladioli, which has a broad host range that includes rice and onion, causes bacterial panicle blight and sheath rot. Based on the complete genome sequence of B. gladioli BSR3 isolated from infected rice sheaths, the genome of B. gladioli BSR3 contains the luxI/luxR family of genes. Members of this family encode N-acyl-homoserine lactone (AHL) quorum sensing (QS) signal synthase and the LuxR-family AHL signal receptor, which are similar to B. glumae BGR1. In B. glumae, QS has been shown to play pivotal roles in many bacterial behaviors. In this study, we compared the QS-dependent gene expression between B. gladioli BSR3 and a QS-defective B. gladioli BSR3 mutant in two different culture states (10 and 24 h after incubation, corresponding to an exponential phase and a stationary phase) using RNA sequencing (RNA-seq). RNA-seq analyses including gene ontology and pathway enrichment revealed that the B. gladioli BSR3 QS system regulates genes related to motility, toxin production, and oxalogenesis, which were previously reported in B. glumae. Moreover, the uncharacterized polyketide biosynthesis is activated by QS, which was not detected in B. glumae. Thus, we observed not only common QS-dependent genes between B. glumae BGR1 and B. gladioli BSR3, but also unique QS-dependent genes in B. gladioli BSR3.