• Korean Management Science Review
• /
• v.34 no.1
• /
• pp.1-13
• /
• 2017

The percentage of 3PL (Third-party Logistics), which uses third party businesses to outsource elements of the company's distribution and fulfillment services, is increasing steadily. To provide 3PL service to the customers, it is needed to estimate the total transportation cost and propose the unit cost to the customers. In this paper, we develop a decision support system for estimation of transportation cost of 3PL provider considering various transportation services, such as direct transportation, multi point visiting transportation, and cross docking. The system supports route planning of vehicles by using algorithms based on tabu search and dynamic programming.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.37 no.1
• /
• pp.60-67
• /
• 2014

This paper considers an inbound ordering and outbound dispatching problem for multi-products and multi-vehicles in a third-party distribution center. The demands are dynamic over a discrete and finite time horizon, and replenishing orders are shipped in various transportation modes and the freight cost is proportional to the number of vehicles used. Any mixture of products is loaded onto any type of vehicles. The objective of the study is to simultaneously determine the inbound lot-sizes, the outbound dispatching sizes, and the types and numbers of vehicles used to minimize total costs, which consist of inventory holding cost and freight cost. Delivery time window is one of the general dispatching policies between a third-party distribution center and customers in practice. In the policy, each demand of product for a customer must be delivered within the time window without penalty cost. We derive mixed integer programming models for the dispatching policy with delivery time windows and on-time delivery dispatching policy, respectively and analyze the effect on a dispatching policy with delivery time windows by comparing with on-time delivery dispatching policy using various computational experiments.

• Journal of the Korean Vacuum Society
• /
• v.15 no.3
• /
• pp.308-313
• /
• 2006

We report a photoluminescence (PL) study on the growth process of self-assembled InAs quantum dots (QDs) under the various growth conditions. Distinctive double-peak feature was observed in the PL spectra of the QD samples grown at the relatively high substrate temperature. From the excitation power-dependent PL and the temperature-dependent PL measurements, the double-peak feature is associated with the ground state transitions from InAs QDs with two different size branches. In addition, the variation in the bimodal size distribution of the QD ensembles with different InAs coverage is demonstrated.

• Journal of the Korean Arthroscopy Society
• /
• v.16 no.2
• /
• pp.160-166
• /
• 2012

Purpose: The aim of this study was to determine the patterns of the stress distribution within the reconstructed anterior cruciate ligament (ACL) double bundles in response to an anterior tibial load and rotatory load at $45^{\circ}$ flexed knee model by use of a 3-dimensional finite element analysis (FEM). Materials and Methods: The $0^{\circ}$ and $45^{\circ}$ flexed 3-D knee model were reconstructed based on the high resolution computed tomography (CT) images from the right knee of a healthy male subject. To simulate double bundle ACL reconstruction, in $0^{\circ}$ analytic model, four 7 mm diameter tunnels were created at the center of each anteromedial (AM) and posterolateral (PL) footprints on the femur and tibia. The grafts were inserted into the corresponding bone tunnels and then reconstructed knee model was flexed to $45^{\circ}$. As a next step, the 5 mm anterior tibial load and internal rotational load of $10^{\circ}$ were applied on the final Computer aided design (CAD) model. And then stress patterns of each bundle were assessed using a finite element analysis. Results: In response to the 5 mm of anterior tibial load, the AM bundle showed increased stresses around the tibial and femoral attachment sites; especially in the anterior aspect of the bundle. In the PL bundle, the highest stress concentration was also noticed on the anterior aspect of the bundle. Under $10^{\circ}$ internal rotational load, the stress concentration was predominant around the anterior aspect of the tibial attachment site within the AM bundle. The PL bundle also showed highest stress concentration on the anterior aspect of the bundle. Conclusion: Although the stress patterns were not identical among the AM and PL bundle, there were common trends in the stress distribution. The stress concentration was predominant on the anterior aspect of both bundles in response to the anterior tibial load and rotatory load.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.3
• /
• pp.221-229
• /
• 2015

The economy is advancing at quite a bit is the role of the Distribution Center, a rise is evolving and mullyuryang Any existing storage facilities were not creating added value from contact with the customer service centers play the role. In order to increase its market competitiveness also pl approach to three in order to enforce cost savings and run. But by industry, the goods, operating characteristics of the cooperating in order to differentiate themselves with the operating process of improvement of operating system, including costs and took lots of time of service.Quality is lower ; all were missing. Such logistics centers, standard management model to address a little bit problem with highest academic. I want to try send it to, each product-category's industrial and business forms, standardisation is really a difficult situation, current study is further progress all you if you are The process managed to turn component is sure that we will be able to be judged.

• Korean Journal of Materials Research
• /
• v.17 no.7
• /
• pp.390-395
• /
• 2007

We systematically investigated the effects of InAs coverage variation, two-step annealing and an asymmetric InGaAs quantum well (QW) on the structural and optical characteristics of InAs quantum dots (QDs) by using atomic force microscopy (AFM), transmission electron microscopy (TEM) and photoluminescence (PL) measurement. The transition of size distribution of InAs QDs from bimodal to multi-modal was noticeably observed with increasing InAs coverage. By means of two-step annealing, it is found that significant narrowing of the luminescence linewidth (from 132 to 31 meV) from the InAs QDs occurs together with about 150 meV blueshift, compared to as-grown InAs QDs. Finally, the InAs QDs emitting at longer wavelength of $1.3\;{\mu}m$ with narrow linewidth were grown by an asymmetric InGaAs QW. The excited-state transition for the InAs QDs with an asymmetric InGaAs QW was not noticeably observed due to the large energy-level spacing between the ground states and the first excited states. The InAs QDs with an asymmetric InGaAs QW will be promising for the device applications such as $1.3\;{\mu}m$ optical-fiber communication.

• Journal of Korean Institute of Industrial Engineers
• /
• v.37 no.4
• /
• pp.331-341
• /
• 2011

This paper considers an inbound lot-sizing and outbound dispatching problem for a single product in a thirdparty logistics (3PL) distribution center. Demands are dynamic and finite over the discrete time horizon, and moreover, each demand has a delivery time window which is the time interval with the dates between the earliest and the latest delivery dates All the product amounts must be delivered to the customer in the time window. Ordered products are shipped by multiple vehicle types and the freight cost is proportional to the vehicle-types and the number of vehicles used. First, we formulate a mixed integer programming model. Since it is difficult to solve the model as the size of real problem being very large, we design a conventional genetic algorithm with a local search heuristic (HGA) and an improved genetic algorithm called adaptive genetic algorithm (AGA). AGA spontaneously adjusts crossover and mutation rate depending upon the status of current population. Finally, we conduct some computational experiments to evaluate the performance of AGA with HGA.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.4
• /
• pp.235-241
• /
• 2011

A large number of industry and trade circulation enterprises integrate logistics resource. They give links of product transport to some professional logistics enterprises in order to reduce costs. We call these professional logistics enterprises as the Third-party Logistics. As the development of the computer and internet, the suppliers, buyers and the Third-party Enterprises connect each other with internet. And different company use different management software, so heterogeneous data become a big problem of the information system for Third-party Enterprises. We built the logistics ontology with prot$\'{e}$g$\'{e}$, and translate it in OWL. We also built the rules for Logistics Ontology to improve the limitations of the OWL. Then we design the intelligent system for 3PL Enterprises Distribution Center based on Logistics Ontology and Logistics Rules. At final, we give an example to show the workflow visually.

• The korean journal of orthodontics
• /
• v.27 no.5 s.64
• /
• pp.711-721
• /
• 1997

The purpose of this study was to investigate the stress distribution and intensity derived from the transpalatal lingual arch in the investing bone composed of photoelastic material(PL-3). The transpalatal lingual arch wire was deflected in the horizontal and vertical direction to give the various conditions. The two-dimensional photoelastic stress analysis was performed, and the stress distrebution was recored by photography The results were as follows: 1. In bilateral expansion, as horizontal deflection was singly applied, the stress was more concentrated on the root apex in square free end than round. In square free end, as vertical deflection was increased gradually, the black line meaning center of rotation moved inferiorly together with the increment of whole fringes. 2. In application of vertical deflection on anchorage side for unilateral expansion, the stress distribution that expansive force leaned to expansion side was observed. As vortical deflection increased, the extruding stress was observed on molar of expansion side. And as horizontal deflection increased, the tipping stress on the molar of anchorage side was observed. 3. In unilateral rotation with the asymmetric toe-in, the fringe appeared on the distal aspect of root apex.

• The Korean Journal of Physiology and Pharmacology
• /
• v.13 no.3
• /
• pp.251-256
• /
• 2009

Previous observations suggest that Bis, a Bcl-2-binding protein, may playa role the neuronal and glial differentiation in vivo. To examine this further, we investigated Bis expression during the in vitro differentiation of P19 embryonic carcinoma cells induced by retinoic acid (RA). Western blotting and RT-PCR assays showed that Bis expression was temporarily decreased during the free floating stage and then began to increase on day 6 after the induction of differentiation. Double immunostaining indicated that Bis-expressing cells do not express several markers of differentiation, including NeuN, MAP-2 and Tuj-1. However, some of the Bis-expressing cells also were stained with GFAP-antibodies, indicating that Bis is involved glial differentiation. Using an shRNA strategy, we developed bis-knock down P19 cells and compared them with control P19 cells for the expression of NeuroD, Mash-1 and GFAP during RA-induced differentiation. Among these, only GFAP induction was significantly attenuated in Pl9-dnbis cells and the population showing GFAP immunoreactivity was also decreased. It is noteworthy that distribution of mature neurons and migrating neurons was disorganized, and the close association of migrating neuroblasts with astrocytes was not observed in P19-dnbis cells. These results suggest that Bis is involved in the migration-inducing activity of glial cells.