• 부모자녀건강학회지
• /
• 제17권1호
• /
• pp.37-45
• /
• 2014

Purpose: This study aimed to review measurements of environmental health behavior and assess the construct validity of Environmental Health Engagement Profile (EHEP) through confirmatory factor analysis. Methods: The literature review was performed for selection of measurements. Confirmatory factor analysis with AMOS 19.0 was used for validation of EHEP. Results: The model fitness was not appropriate in the one-factor model; $x^2=91.11$ (df=5, p<.001), Comparative Fit Index (CFI)=8.19, Non Normed Fit Index (NNFI)=6.39, and Root Mean Square Error of Approximation (RMSEA)=0.20. The model fitness was appropriate in the two-factor model; $x^2=3.19$ (df=1, p=.074), CFI=9.95, NNFI= 9.71, RMSEA=0.07. A modification of scale was found to be the most suitable for use in the investigation of environmental health behavior. Conclusion: This study confirms that a two-factor model underlies the concept of environmental health behavior. The review of measurements can help nurses and researchers to assess the environmental health behaviors.

• 한국응용과학기술학회지
• /
• 제39권1호
• /
• pp.115-131
• /
• 2022

본 연구는 PRECEDE-PROCEED 모형을 기반으로 의무경찰을 위한 건강증진교육프로그램의 효과를 검증하였다. 연구대상자는 2018년 7월부터 10주간 D지방경찰청 의무경찰 2개 부대를 편의표집하여 실험군25명, 대조군 26명으로 하였다. 모든 참가자는 자기 효능감, 사회적 지지, 자원이용가용성, 건강증진행위, 삶의 질에 대한 설문지를 작성하고 객관적인 스트레스 테스트를 받았다. 실험군은 5주간 PRECEDE-PROCEED 모형에 따른 7회의 건강증진교육프로그램을 이수하였다. 자료분석은 SPSS/WIN 21.0 프로그램을 이용하여 실험군 대조군의 일반적 특성 및 건강관련 특성의 동질성 검증을 위해 카이제곱 검정과 독립표본 t-검정, Fisher's exact test을, 가설검증은 반복측정 분산분석(Repeated Measures ANOVA)을 통해 분석하였다. 연구결과, 건강증진행위(F=7.63, p<.001), 자율신경활성도(F=29.24, p<.001), 스트레스저항도(F=31.22, p<.001), 스트레스지수(F=22.42, p<.001), 피로(F=12.87, p<.001), 삶의 질(F=3.49, p=.042)로 나타났다. 의무경찰의 건강증진교육프로그램은 삶의 질 향상에 긍정적인 효과가 있는 것으로 검증되어 의무경찰에게 유용하게 활용될 수 있을 것이다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제13권12호
• /
• pp.1691-1698
• /
• 2000

An in situ digestion trial (Experiment 1) and a lactation trial (Experiment 2) were conducted to determine the effects of replacing corn and wheat bran with soyhulls (SH) in lactating dairy cow diets on the extent and kinetics of digestion of DM and NDF, and lactation performance. In experiment 1, five mixed feeds consisting of mixed concentrate and roughages (50:50 on a DM basis) were formulated on isonitrogenous and isoenergetic bases to produce five levels (0, 25, 50, 75 and 100%) of SH replacement for corn and wheat bran. SH had high in situ digestion (92 and 89% for potentially digestible DM and NDF) and fairly fast digestion rate (7.2 and 6.3 %/h for DM and NDF). Increasing level of SH replacement resulted in increased NDF digestibility (linear, p=0.001-0.04) and similar DM digestibility (beyond 12 h incubation, p=0.10-0.41). As level of SH replacement increased, percentage of slowly digestible fraction (b) of DM increased (linear, p=0.03), percentage of rapidly digestible fraction (a) of DM tended to decrease (linear, p=0.14), and DM digestion lag time tended to be longer (linear, p=0.13). Percentage of potentially digestible fraction (a+b) and digestion rate (c) of slowly digestible fraction of dietary DM remained unaltered (p=0.36-0.90) with increasing SH in the diet. Increasing level of SH for replacing corn and wheat bran in the diet resulted in increases in percentages of b (quadratic, p<0.001), a (linear, p=0.08), a+b (quadratic, p=0.001) and a tendency to increase in c for NDF (linear, p<0.19). It was also observed that there was a satisfactory fit of a non-linear regression model to NDF digestion data ($R^2=0.986-0.998$), but a relatively poor fit of the model to DM digestion data ($R^2=0.915-0.968$). In experiment 2, 42 lactating Holstein cows were used in a randomized complete block design. SH replaced corn and wheat bran in mixed concentrates at 0, 25, and 50%, respectively. These mixed concentrates were mixed with roughages and fed ad libitum as complete diets. Replacing corn and wheat bran with SH at 0, 25 and 50% levels did not influence (p=0.56-0.95) DM intakes (18.4, 18.6, and 18.5 kg/d), milk yields (27.7, 28.4 and 27.6 kg/d), 4% fat-corrected-milk (FCM) yields (26.2, 27.6, and 27.3 kg/d) and percentages of milk protein (3.12, 3.17 and 3.18%), milk lactose (4.69, 4.76 and 4.68%) and SNF (8.50, 8.64, and 8.54%). On the other hand, milk fat percentges linearly increased (3.63, 3.85 and 3.90% for SH replacement rates of 0, 25 and 50% in the diet, p=0.08), while feed costs per kg FCM production were reduced.

• 융합정보논문지
• /
• 제9권3호
• /
• pp.36-43
• /
• 2019

본 연구의 목적은 간호대학생의 직소모형과 플립러닝 융합교육의 효과를 확인하기 위함이며 비동등성 대조군 전 후 설계 실험연구이다. 연구대상자는 J지역에 소재한 간호학과 3학년 통합실습II를 수강한 81명의 학생으로 자료는 설문지를 이용하여 융합교육 전 후에 수집되었다. 연구결과, 직소모형과 플립러닝 융합교육이 학습만족도(t=-3.783, p=.001)에서 유의하게 나타났다. 따라서 직소모형과 플립러닝 융합교육을 교수학습방법으로 활용하면 학습만족도를 향상시켜 학습성과를 극대화 시킬 수 있을 것으로 사료되며, 본 연구는 그 기초자료로 의의가 있다. 이러한 연구결과를 토대로 직소모형과 플립러닝을 융합한 후속연구와 교수학습 프로그램 개발 및 적용이 필요하다.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제11권1호
• /
• pp.72-79
• /
• 2006

Kojic acid production by Aspergillus flavus strain S44-1 using sucrose as a carbon source was carried out in a 250-mL shake flask and a 2-L stirred tank fermenter. For comparison, production of kojic acid using glucose, fructose and its mixture was also carried out. Kojic acid production in shake flask fermentation was 25.8 g/L using glucose as the sole carbon source, 23.6 g/L with sucrose, and 6.4 g/L from fructose. Reduced kojic acid production (13.5 g/L) was observed when a combination of glucose and fructose was used as a carbon source. The highest production of kojic acid (40.2 g/L) was obtained from 150 g/L sucrose in a 2 L fermenter, while the lowest kojic acid production (10.3 g/L) was seen in fermentation using fructose as the sole carbon source. The experimental data from batch fermentation and resuspended cell system was analysed in order to form the basis for a kinetic model of the process. An unstructured model based on logistic and Luedeking-Piret equations was found suitable to describe the growth, substrate consumption, and efficiency of kojic acid production by A. flavus in batch fermentation using sucrose. From this model, it was found that kojic acid production by A. flavus was not a growth-associated process. Fermentation without pH control (from an initial culture pH of 3.0) showed higher kojic acid production than single-phase pH-controlled fermentation (pH 2.5, 2.75, and 3.0).

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(1)
• /
• pp.357-360
• /
• 2000

This paper describes a parameter extraction method for HBT(Heterojunction Bipolar Transistor) equivalent circuit model without measurements of special test structures or numerical optimizations. Instead, all equivalent circuit parameters are calculated analytically from small-signal S-parameters measured under different bias conditions. These values being extracted from the cutoff mode can be used to extract intrinsic parameters at the active mode. This method yields a deviation of about 1.3 % between the measured and modeled S-parameters.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2002년도 학술발표회 발표논문집
• /
• pp.361-364
• /
• 2002

The WASP model was applied to Bokha stream with 8.4km of its main stem located in Ichon-gun, Kyonggi province in Korea. The stream was divided into 26 segments with each of 400m length, and 5 segments were embraced boundaries of its tributaries. The parameters of the model were calibrated by the trial and error method to minimize differences between observed and simulated concentration of water quality constituents. The correlation coefficients for DO, $NO_3-N,\;PO_4-P$ and organic P showed high values providing the ability of simulation. The correlation coefficients for BOD and $NH_3-N$ showed low values in both calibration and verification test.

• Communications for Statistical Applications and Methods
• /
• 제8권3호
• /
• pp.777-786
• /
• 2001

The autoregressive models have been used to describe a wade variety of time series. Then the problem of determining the order in the times series model is very important in data analysis. We consider the Bayesian approach for finding the order of autoregressive(AR) error models using the latent variable which is motivated by Tanner and Wong(1987). The latent variables are combined with the coefficient parameters and the sequential steps are proposed to set up the prior of the latent variables. Markov chain Monte Carlo method(Gibbs sampler and Metropolis-Hasting algorithm) is used in order to overcome the difficulties of Bayesian computations. Three examples including AR(3) error model are presented to illustrate our proposed methodology.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1995년도 가을 학술발표회 논문집
• /
• pp.187-192
• /
• 1995

Four types of experiments were performed to check the similitude of member behavior between prototype and 1/10 scale models:(1) Test of slender columns with P- effect, (2)Test of short columns with and without confinement steel, (3)Test of simple beams without stirrups, and (4)T-beam test. Based on the results of experiments, the conclusions were made as follows : (1) The P- effect of slender columns can be almost exactly represented by 1/10 acale model. (2)The effect of confinement on short columns by the hoop steel can also roughly simulated by 1/10 scale model. (3)The failure modes of simple beams models were the yielding of tension steel followed by large diagonal tension cracking+compressive concrete failure. (4)The behaviors of prototype and 1/10 scale model in T-beams appear very similar.

• Journal of Power Electronics
• /
• 제11권3호
• /
• pp.381-388
• /
• 2011

This article presents the development of a model for SiC power diodes based on the physics of the semiconductor. The model is able to simulate the behavior of the dynamics of the charges in the N- region based on the stored charge inside the SiC power diode, depending on the working regime of the device (turn-on, on-state, and turn-off). The optimal individual calculation of the ambipolar diffusion length for every phase of commutation allows for solving the ambipolar diffusion equation (ADE) using a very simple approach. By means of this methodology development a set of differential equations that models the main physical phenomena associated with the semiconductor power device are obtained. The model is developed in Pspice with acceptable simulation times and without convergence problems during its implementation.