• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.4B
• /
• pp.637-646
• /
• 2010

For 40 Gb/s data transmission through electrical backplane trace up to 40 inch length on four layer fire-resistant (FR-4), we have designed the 40 Gb/s backplane channel model consisting of four channel 10 Gb/s. Simulation results show an enhancement of backplane channel characteristics excellent more than requirements specified in IEEE P802.3ba at 10 Gb/s. This paper provides a review of the structures and algorithms used in receive and adaptive equalization for 40 Gb/s backplane Ethernet. The use of this backplane channel model could achieves better receive equalizer at great data rate than 10 Gb/s.

• KSBB Journal
• /
• v.5 no.1
• /
• pp.69-74
• /
• 1990

Dynamic characteristics of separation in membrane filtration system of tangential flow was investigated to find the functional relationship among the filtrate flux, transmembrane pressure, inulin concentration and recirculation rate. In case that NMWL is 1000, tracts-membrane pressure $0.4kgf/\;{\textrm{cm}^2}$ to $3.2kgf/\;{\textrm{cm}^2}$, inulin concentration lwt% to 5wt%, and recirculation rate 4ml / sec, mathematical model for the function among filtrate flux, transmembrane pressure, and inulin concentration was deduced and expressed as follows.Jv = (0.0022p + 0.0003) ln \frac{3p\;+\;2.1}{C_b}$ The values calculated by the above equation and those measured were compared to find to be nicely in accord with each other. Especially the agreement was enhanced in the region of higher concentration of inulin.

• Ecology and Resilient Infrastructure
• /
• v.3 no.4
• /
• pp.231-237
• /
• 2016

The purpose of this study is to analyze phosphate adsorption characteristic of the filter media applied in water purification technology. And it is also to observe the removal efficiency of the technology that was developed by combining the purification abilities of filter media and the vegetation mat. The filter media, Adphos, is the subject of this study. The result of adsorption test shows that $PO_4{^{3-}-P}$ adsorption characteristics of Adphos is determined by the Langmuir isotherm model fitting and the $q_m$ (maximum adsorption amount) value is calculated as 1.162 mg/g. To verify the removal efficiency of the purification technology, a lab-scale reactor, including a 400 mm depth of filter bed filled by Adphos, was manufactured. Yellow flag Iris (Iris pseudacours L.) was planted on the vegetation bed and the coir-roll was used to fix the root of vegetation. The reactor ran 8 hours per day over 71 days, and the results of filtration experiment show that average removal efficiency of SS, T-N and T-P were calculated as 94%, 41% and 64% respectively. With these results, it was proved that the purification technology is highly effective. And for the long-time use, a maintenance guide is also required.

• Convergence Security Journal
• /
• v.19 no.4
• /
• pp.165-171
• /
• 2019

The domestic information security market is booming, For the development of the information security industry. I wanted to suggest a strategy for finding and developing a good business model. So the main products were classified by similar industries. And The sector was selected as the dependent variable. Expert interviews were conducted and classified according to technical maturity. Independent variables were sales, number of employees, and performance. Average analysis result, sales amounted to 8.798 billion won, 13.51 years in industry, and 64.3 employees. As a result of SPSS statistical analysis, the correlation between industry type and sales according to technical maturity (r = -.729) was within 5% of significance level. The regression results were significant. (p= .047<0.05) Therefore, industry classification and sales are related to technological maturity.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.10
• /
• pp.116-121
• /
• 2009

It is important to consider lumbar lordotic angle for setup of training program in field of sports and rehabilitaton to prevent unexpected posture deviation and back pain. The purpose of this study was to analyze the biomechanical impact of the level of lumbar lordosis angle during isokinetic exercise through dynamic analysis using a 3-dimensional musculoskeletal model. We made each models for normal lordosis, excessive lordosis, lumbar kyphosis, and hypo-lordosis according to lordotic angle and inputted experimental data as initial values to perform inverse dynamic analysis. Comparing the joint torques, the largest torque of excessive lordosis was 16.6% larger and lumbar kyphosis was 11.7% less than normal lordosis. There existed no significant difference in the compressive intervertebral forces of each lumbar joint (p>0.05), but statistically significant difference in the anterioposterior shear force (p<0.05). For system energy lumbar kyphosis required the least and most energy during flexion and extension respectively. Therefore during the rehabilitation process, more efficient training will be possible by taking into consideration not simply weight and height but biomechanical effects on the skeletal muscle system according to lumbar lordosis angles.

• Applied Biological Chemistry
• /
• v.50 no.3
• /
• pp.192-197
• /
• 2007

3D-QSARs on the fungicidal activity of N-phenylbenzenesulfonamide and N-phenyl-2-thienylsulfonamide analogues (1-37) against Phytophthora blight (Phytophthora capsici) were studied quantitatively using CoMFA and CoMSIA methods. The statistical results of the optimized CoMFA (2) model ($r^2_{cv.}(q^2)$ = 0.692 & $r^2_{ncv.}$= 0.965) show better predictability and fitness than CoMSIA (2) model ($r^2_{cv.}(q^2)$ = 0.796 & $r^2_{ncv.}$= 0.958). The fungicidal activities according to the information of the optimized CoMFA (2) model were dependent upon the steric and electrostatic fields of the molecules. Therefore, from the contribution contour maps of CoMFA (2) model, it is expected that 63% contribution was caused by the steric bulk of meta-substituent ($R_1$) on the S-phenyl ring. Also, the other contribution level of 32.9% was represented by the positive charged $R_4-group$ ($R_1$) on the N-phenyl ring and para-substituent ($R_1$) on the S-phenyl ring. A series of higher active compounds, $R_1$= 3-decyl substituent ($pred.pI_50$= 5.88) etc. were predicted based on the findings.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.15 no.3
• /
• pp.491-499
• /
• 2002

A p-version finite element model based on degenerate shell element is proposed tot the analysis of orthotropic laminated plates. In the nonlinear formulation of the model, the total Lagrangian formulation is adopted with large deflection and moderate rotation being accounted tot in the sense of yon Karman hypothesis. The material model is based on the Huber-Mises yield criterion and Prandtl-Reuss flow rule in accordance with the theory of strain hardening yield function, which is generalized lot anisotropic materials by introducing the parameters of anisotropy. The model is also based on extension of equivalent-single layer laminate theory(ESL theory) with shear deformation, leading to continuous shear strain at the interface of two layers. The integrals of Legendre polynomials are used for shape functions with p-level varying from 1 to 10. Gauss-Lobatto numerical quadrature is used to calculate the stresses at the nodal points instead of Gauss points. The validity of the proposed P-version finite element model is demonstrated through several comparative points of iew in terms of ultimate load, convergence characteristics, nonlinear effect, and shape of plastic tone.

• Korean Journal of Crystallography
• /
• v.6 no.1
• /
• pp.43-48
• /
• 1995

The crystal structure of P-toluenesulfonanilide, C13H13NO2S is monoclinic, space group P21/c, a=8.777(1)Å, b=9.784(2)Å, c=15.139(2)Å, β=99.00(1)°, Z=4, V=1284.0(6)Å3, Dc=1.28g/cm33, λ(Mo-Kα)=0.71069Å, μ=2.3cm-1, F(000)=520, Temperature : 293±3K, R=0.038 for 711 Fo<3.0σ unique observed reflection. The structure was determuned by direct method and refined by full-matrix least squares refinement. Two benzene rings have the dihedral angle of 68.4°. Moleculs are accumulated according to the c axis with two fold screw and contacted by van der Walls force.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2000.11a
• /
• pp.37-39
• /
• 2000

오존에 대한 예보 모델을 연구하는 데는 오존의 생성과 소멸에 관한 광 화학 반응에 대한 이해가 중요한 데 대류권에서 일어나는 알짜 오존 생성(net ozone production)반응은 다음과 같다. (R1) $HO_2$.+NO$\longrightarrow$$NO_2$+OH. (R2) $RO_2$.+NO$\longrightarrow$$NO_2$+RO. (R3) $NO_2$+hu(424< nm) $\longrightarrow$NO+O($^{3}P$) (R4) O($^{3}P$)+$O_2$+M$\longrightarrow$$O_3$+M이때 (R1)과 (R2) 반응에 참여하는 $HO_2$.라디칼 / $RO_2$.라디칼은 주로 대기 중에 존재하는 탄화수소(RH)와 OH.의 반응에 의하여 직접 생성되기도 하고, 이때 생성된 알데하이드(RCHO) 화합물이 OH.과의 반응과 광분해 반응을 통해서 형성된다. 한편, 대도시 지역의 경우 자동차의 배기가스가 알데하이드 화합물의 주요 인위적인 배출원으로 알려져 있다(Viskari et al., 2000, Granby et al., 1997). (중략)

• Journal of Industrial Technology
• /
• v.27 no.A
• /
• pp.203-209
• /
• 2007

본 연구는 목재로서 활용가치가 적은 수피(bark)를 활용하여 수질오염물질을 제거할 수 있는 여과 시스템에 대한 기초연구로서 소나무의 일종인 loblolly pine(Pinus taeda L.) 수피의 인 ($PO_4-P$) 흡착특성을 연구하였다. 실험에 사용된 수피는 입상형태로서 polyallylamine hydrochloride로 전처리하여 회분식 등온 흡착실험을 수행하였다. 회분식 등온흡착실험은 수용액 pH 3~pH 8범위에서, 인의 농도별(10, 20, 30, 40 mg/L)로 수행하였다. pH 5에서 가장 높은 인 제거 효율을 나타냈으며, 수용액의 pH는 실험 후 pH 3으로 감소하였다. 이러한 감소는 수피에 의한 phosphate의 흡착이 Lewis acid-base 반응으로서 이 과정에서 $H^+$의 방출로 인하여 나타난 현상인 것으로 여겨지며, 주된 반응 메카니즘은 더 연구할 필요성이 있다. 인 흡착은 초기에 빠른 속도로 진행되었으며 대략 200분 이후에 평형에 도달하였고, 시간이 지날수록 흡착양이 증가하는 경향을 보였다. 인의 흡착특성 결과는 Langmuir 등온흡착식과 Freundlich 등온흡착식으로 설명될 수 있으며, 등온흡착식 적용결과, 흡착제에 대한 최대 흡착능은 7.14 mg/g 이며 다른 흡착제와 비교하여 더 높았다. 실험결과와 모델에 의한 흡착능을 비교하고자 pseudo second-order model을 적용하여 흡착 동역학 상수를 구하였다. 또한 EDXA분석으로 회분식 흡착실험 후 수피와 인이 결합되어있는 것을 확인할 수 있었다.