• Steel and Composite Structures
• /
• v.26 no.2
• /
• pp.125-137
• /
• 2018

In this work, the bending and free vibration analysis of multilayered plates and shells is presented by utilizing a new higher order shear deformation theory (HSDT). The proposed involves only four unknowns, which is even less than the first shear deformation theory (FSDT) and without requiring the shear correction coefficient. Unlike the conventional HSDTs, the present one presents a novel displacement field which incorporates undetermined integral variables. The equations of motion are derived by using the Hamilton's principle. These equations are then solved via Navier-type, closed form solutions. Bending and vibration results are found for cylindrical and spherical shells and plates for simply supported boundary conditions. Bending and vibration problems are treated as individual cases. Panels are subjected to sinusoidal, distributed and point loads. Results are presented for thick to thin as well as shallow and deep shells. The computed results are compared with the exact 3D elasticity theory and with several other conventional HSDTs. The proposed HSDT is found to be precise compared to other several existing ones for investigating the static and dynamic response of isotropic and multilayered composite shell and plate structures.

• Carbon letters
• /
• v.14 no.1
• /
• pp.55-57
• /
• 2013

The development of hollow carbon balls by $CO_2$ oxidation of two types of carbon blacks was studied. Super P (SP) and Denka Black (DB) were used for this study. Specific surface area (SSA), structural parameters, and microstructures were examined using Brunauer, Emmett and Teller apparatus, X-ray diffraction spectroscopy, and transmission electron microscope (TEM), respectively. The SSAs of both oxidized carbon blacks increased after oxidation. The SSAs of raw DB and SP were 73 $m^2/g$ and 60 $m^2/g$, respectively. Maximum SSAs of oxidized DB and SP were 152 $m^2/g$ and 253 $m^2/g$, respectively. The $d_{002}$ of DB and SP showed almost no change after oxidation. The Lc of raw DB ($38{\AA}$) and SP ($19{\AA}$) increased with increasing weight loss. The $L_c$ of SP increased up to $254{\AA}$ at 96% weight loss. The SSA increased about twice in DB (148 $m^2/g$) and about four times in SP (254 $m^2/g$) after 3 h oxidation compared with the original carbon blacks. Through TEM observation the outer parts of the oxidized carbon blacks showed a rigid shell structure and the inner parts looked empty. Generally it looked like an angular soccer ball, so we named it 'hollow carbon ball'. It is expected that the hollow carbon ball can be used as catalyst supports.

• Journal of the Korean Chemical Society
• /
• v.37 no.1
• /
• pp.3-9
• /
• 1993

Specific rates of solvolysis of 1-adamantyl fluoroformate in hydroxylic solvents have been measured by an electric conductivity method under various pressures. The activation parameters (${\Delta}V^{\neq}{_o},\;{\Delta}{\beta}^{\neq},\;{Delta}H^{\neq},\;{Delta}S^{\neq}$,/TEX>) and average pressure within the solvation-shell of activated complex (charge development) have been estimated from the rates. Also, the selectivities for the formation of solvolysis products in aqueous ethanol have been determined by response-calibrated GC. The values of ${\Delta}V^{\neq}{_o},\;and\;{\Delta}{\beta}^{\neq}$ are both negative, but ${Delta}H^{\neq}$ is positive and ${Delta}S^{\neq}$, is large negative. This behavior is discussed in terms of electrostriction of solvation. From these results, it could be postulated that the solvolysis of 1-adamantyl fluoroformate have two major reaction pathway.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.2 no.2
• /
• pp.233-239
• /
• 1999

Acrodermatitis enteropethica (AE) is a rare autosomal recessive disorder of zinc absorption leading to chronic diarrhea and characteristic skin lesion. The term is also applied to any acquired zinc deficiency state resulting in the same clinical pictures. We experienced one case of AE in 1 month old male infant who had bacterial enterocolitis. The skin around mouth, anus, eyes, ears, hands and legs became reddish, vesicular and eczematoid. Serum zinc level was decreased to $51.4\;{\mu}g/dL$ (N=70~150). Endoscopic finding revealed pale gastric mucosa and villous atrophy of small intestine. Biopsy finding of small intestine showed no villi due to mucosal atrophy. On 13 day of admission jaundice with DIC were noted and AST & ALT were elevated to 110 & 36.8 IU/L, respectively. Diarrhea was improved but jaundice and liver function were not recovered until discharge from hospital. After discharge when the patient was 4 months of age serum bilirubin and AST/ALT had not been normalized. CMV shell vial culture of urine and CMV Ig G antibody were positive. So intravenous ganciclovir injection of 7.5 mg/kg, two times a day for 2 weeks and then 10 mg/kg/day for 3 months was done from 4 to 6 months of age. No virus was found in the urine and AST & ALT were normalized at 2 months after stopping ganciclovir treatment.

• International journal of steel structures
• /
• v.18 no.5
• /
• pp.1617-1630
• /
• 2018

The crucial differences between conventional rail with split-type connectors and continuous welded rails are axial stress in the longitudinal direction and stability, as well as other issues generated under the influence of loading effects. Longitudinal stresses generated in continuously welded rails on railway bridges are strongly influenced by the nonlinear behavior of the supporting system comprising sleepers and ballasts. Thus, the track structure interaction cannot be neglected. The rail-support system mentioned above has properties of non-uniform material distribution and uncertainty of construction quality. The linear elastic hypothesis therefore cannot correctly evaluate the stress distribution within the rails. The aim of this study is to apply the nonlinear finite element method using the nonlinear coupling interface between the track and structural model and to illustrate the welded rail behavior under the loading effect and uncertain factors of the ballast. Numerical results of nonlinear finite analysis with a three-dimensional solid and frame element model are presented for a typical track-bridge system. A composite plate girder, modeled by solid and shell elements, is also analyzed to consider the behavior of the welded rail. The analysis result showed buckling under the independent calculations of load cases, including 'temperature change', 'bending of the supporting structure', and 'braking' of the railway vehicle. A parametric study of the load combination method and the loading sequence is also included in this analysis.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.6
• /
• pp.71-84
• /
• 2003

The metallic shell of soil-steel structures are so weak in bending moment that it should sustain the applied load by the interaction of the backfill soil around the structures. The shell can be subjected to excessive bending moment during side backfilling or under live-load when the soil cover is less than the minimum value. The current design code specifies the allowable deformation and Duncan(1979) and McGrath et al.(2001) suggested the strength analysis methods to limit the moments by the plastic capacity of the shell. However, the allowable deformation is an empirically determined value and the strength analysis methods are based on the results of FE analysis, hence the experimental verification is necessary. In this study, the full-scale tests were conducted on the high-profile arch to investigate its behaviors during backfilling and under static live-loads. Based on the measurements, the allowable deformation of the tested structure could be estimated to be 1.45% of rise, which is smaller than the specified allowable deformation. The comparison between the measurements and the results of two strength analyses indicate that Duncan underestimates the earth-load moment and overestimates the live-load moment, while McGrath et al. predicts both values close to the actual values. However, as the predicted factors of safeties using two methods coincide with the actual factor of safety, it can be concluded that both methods can predict the structural stability under live-loads adequately when the cover is less than the minimum.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.56 no.1
• /
• pp.50-56
• /
• 2011

This study was designed to investigate variation of pinitol content in different parts of seventeen legume species including silk tree (Albizia julibrissin). D-pinitol has been demonstrated to exert insulin-like and anti-inflammatory effects. These legumes were collected from Gyeongsangbuk-Do in Korea. Significant difference in pinitol content was observed among 17 different legume species. However, it was the highest in sericea lespedeza (Lespedeza cuneata). The highest pinitol content was observed in leaf followed by stem, pod shell, seed and root among plant parts. Legume plants which had higher pinitol content in leaves were chinese pea shrub, bastard indigo, wild cowpea and sericea lespedeza, having 59.9 mg/g, 62.2 mg/g, 69.6 mg/g and 65.4 mg/g, respectively. Stem of astragali radix showed the highest pinitol content among all leagumes, which was 34.0 mg/g. In case of root, kudzuvine showed the highest pinitol content followed by licorice and chinese pea shrub, which were 24.6 mg/g, 16.9 mg/g, and 16.5 mg/g, respectively. However, in the case of pod shell and seed, only lablab purpureus and sericea lespedeza showed the highest pinitol content 52.5 mg/g (for pod shell) and 24.9 mg/g (for seed), respectively. Concluding, the sericea lespedeza showed the highest total pinitol content of whole plant followed by chinese redbud, chinese pea shrub, bastard indigo and silk tree. Considering the pinitol content and harvesting yield, sericea lespedeza can be used as a practical medicinal herb.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1992.04b
• /
• pp.581-591
• /
• 1992

최근 급속한 사무자동화와 함께 컴퓨터의 사용이 보편화되어 가지고 있다. 이에 따라 컴퓨터등 VDT에 매달려 일하는 사무직 근로자들이 시력장해, 두통, 어깨결림, 요통, 스트레스성 장애등 새로운 질병에 시달리고 있다. 이것은 "VDT증후군"(Visual Display Terminal Syndrome) 또는 "VDT병"이란 신종 직업병이다. 컴퓨터 수상기 화면을 계속해서 들여다보면 화면에서 나오는 자외선과 강한 빛으로 눈에 무리가 와 충혈되고 침침해지며 두통 증세가 나타난다. 이런 초기증상이 6개월이상 계속되면 시력이 떨어지고 만성피로를 느끼는가 하면, 때때로 독감과 비슷한 증상이 나타나며, 심하면 탈모현상까지 경험하게 된다. 요즘 시행되고 있는 초등 고교 컴퓨터교육의 의무화와 2천년대의 1가구 1단말기 설치를 목표로한 컴퓨터 영상단말기의 급속한 보급으로, 앞으로는 사무실뿐만 아니라 일반 가정에까지 컴퓨터 이용이 일상화될 전망이고 보면 VDT작업에 따른 건강장해 문제는 더이상 가볍게 볼 수 없는 문제이다. 이에 대해 선진국에서는 작업시간 규제, 회사가 종업원의 정기적인 시력검진 및 시력교정에 필요한 비용을 보조하도록 하는가하면 실작업환경 개선등 다각적인 대책을 마련하고 있다. 미국, 유럽, 일본등 선진국에서는 VDT작업 여성들의 유산 및 기형아 출산등 임신이상에 관한 실태보고서까지 나오고 있어 여성들에게 커다란 충격을 던져주고 있다. 그러나 우리나라에서는 VDT병 증상을 호소하는 근로자들의 직업병예방 및 대책에 큰 어려움을 겪고있다. 그러므로, VDT작업으로 인한 건강상의 문제, 작업환경 및 작업자세등을 조사하여 문제점과 예방대책을 살펴보고, 작업장을 인간공학적으로 설계하고 평가하여 사용자의 건강을 보호하고 생산성의 향상에 도움이 되고자 한다.생산성의 향상에 도움이 되고자 한다.Action Code를 계산처리부로 넘겨준다. 입력처리부에서는 Mouse와 Keyboard 어느것으로나 입력이 가능하도록 해준다. 출력처리부에서는 Action Code에 따라 계산처리부에서 계산된 결과를 화면에 보여주기 위한 각종 2D/3D Graphic Routine들이 포함되어있어 계산처리부에서 불러쓰도록 되어있다.에서는 전문가시스템 기법을 도입해서 사출금형 공정계획전문가의 지식과 경험을 획득하여 지식베이스를 구축하고, 전문가시스템 셀(shell)중 CLIPS를 이용하여 자동공정계획시스템인 Mold CAPP을 개발하였다.PP을 개발하였다.며 이와 상이한 결과도 보여주고 있다. 이상으로 볼 때 1) 가정하수의 질을 높이기 위하여 분뇨정화조 의 효율증대 2) 산업폐수의 공정별 폐수량의 조절 및 폐수성 상에 따른 총량규제에 대비한 효율증대 3) 하천의 오염부하와 자정능력 최대한 부여 4) 폐수처리를 위한 미생물제개발 및 오염지표 종 연구와 오염내성 생물의 연구등이 종합적 으로 수행되어야 한다. 5) 이상의 모든 조사와 연구결과를 객관적으로 표기할 수 있도록 하천의 이정표가 정해져야 하겠다.7%)에 비해 유의하게 낮았고 정상군과는 유의한 차이를 보이지 않았다.상고나성이 있었다. 혈중 호모시스테인 농도는 질병의 위험요인으로서 뿐 아니라 대사적으로 밀접하게 연관된 비타민 영양상태의 biomarker로서도 그 영향력이 크다고 할 수 있다. 따라서 성별에 다른 다양한 연령집단에서 건강한 일반인과 심혈관계 질환자 등을 대상으로 호모시스테인과 비타민 영양상태에 대한 연구가 체계적으로 이루어 져야 할 것이다.태를 보다 효율적으로 증진시킬 수 있는 대안이 마련되어져야 한다고 사료된다.$\ulcorner$순응$\lrcorner$의 범위를 벗어나지 않는다. 그렇기 때문에도

• Korean Journal of Poultry Science
• /
• v.32 no.1
• /
• pp.15-21
• /
• 2005

This Study was conducted to investigate the effects of microbial phytase in low phosphirus and calcium level diet on the performance and nutrient digestibility in laying hens. One hundred ninety two, 50 wks old, ISA brown commerical layers were used for 12 weeks feeding trial after 7-d adjustment period. Four dietary treatments included CON(control; Co.), P2 ($0.06\%$ Natuphos, BASF) and P3 ($0.06\%$ PHOSMAX, GENOFOCUS). Ca and available P concentrations of P1, P2 and P3 were 90 and $50\%$ of NRC recommecdations to accentuate difference in response to phytase availability. In whole period, egg production was not affected by treatments. At 12 weeks, egg weight was significantly increased in adding phytase treatments (P<0.05). Egg shell thickness was increased in P1, P2 and P3 treatments compared with control (P<0.05) at 9 weeks. Ca concentration of serum tended to decrease in P1 treatment without significant difference (P>0.05). Ca and P concentrations of tibia were higher in layers fed dietary phyrase than those fed control diet without significant difference (P>0.05). Digestibilities of DM, N and ash were improved in P1 treatment compared with P2 and P3 treatments (P<0.05). Ca and P digestibilities were the highest in P2 treatment (P>0.05), but was not significant difference between control and P1 treatments.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.4 s.334
• /
• pp.19-28
• /
• 2005

In this paper, we proposed a parallel fast 2-D discrete wavelet transform hardware architecture based on lifting scheme. The proposed architecture improved the 2-D processing speed, and reduced internal memory buffer size. The previous lifting scheme based parallel 2-D wavelet transform architectures were consisted with row direction and column direction modules, which were pair of prediction and update filter module. In 2-D wavelet transform, column direction processing used the row direction results, which were not generated in column direction order but in row direction order, so most hardware architecture need internal buffer memory. The proposed architecture focused on the reducing of the internal memory buffer size and the total calculation time. Reducing the total calculation time, we proposed a 4-way data flow scheduling and memory based parallel hardware architecture. The 4-way data flow scheduling can increase the row direction parallel performance, and reduced the initial latency of starting of the row direction calculation. In this hardware architecture, the internal buffer memory didn't used to store the results of the row direction calculation, while it contained intermediate values of column direction calculation. This method is very effective in column direction processing, because the input data of column direction were not generated in column direction order The proposed architecture was implemented with VHDL and Altera Stratix device. The implementation results showed overall calculation time reduced from $N^2/2+\alpha$ to $N^2/4+\beta$, and internal buffer memory size reduced by around $50\%$ of previous works.