• Proceedings of the KIEE Conference
• /
• 1998.11a
• /
• pp.61-63
• /
• 1998

Disk type single phase SRM (DSPSRM) has a specific property of axial flux machine and radial flux machine simultaneously. So, this DSPSRM has a complicated magnetic circuit and it is difficult to analyze characteristics. Therefore, in this paper, the design specification of DSPSRM was calculated based on conventional design theory of electric machine and analyzed by 3D FEM. As the result of analysis, the approximated torque characteristics was obtained by finding the magnetic flux and energy distribution with the rotor position.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.05a
• /
• pp.71-74
• /
• 2008

In order to resolve the problems which appear after the clean large ingot production process, the impurities which are involved in the steel smelting process should be removed by developing cleaner materials. Through the rationalization of cogging process that is the first forging process of large ingot the quality is to be improved. For the sake of the optimization of an open die forging process and the improvement of the subject matter frequency ratio, a hazard precise die forging process must be developed and a Near Net Shape Forming accomplished. As a result, energy can be reduced by minimizing an after control process. In order to produce large axes and other forming parts, processing techniques are to be developed. In this context, this paper is a study about a reduction ratio, dies width ratio and rotary angles, the amount of overlap, and intends to analysis cogging processes, utilizing Deform-3D cogging module

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.750-755
• /
• 2005

This paper proposes a small VCM (Voice coil motor) type actuator using curved suspensions for auto-focusing and zoom motions for mobile information devices. 1'he proposed focusing actuator adopts a nontraditional type of suspension using curved beams in order to extend output displacement within small height restriction. The curved beam is similar to the leaf spring type which is usually used in optical disk drives. In addition, three different materials are considered for the curved suspension model, and Aluminum shows the best dynamic characteristics. The proposed zoom actuator does not use a suspension supporting bobbin but a moving rail and a sloper mechanism by generating rotational force at lens holder. The sensitivity of design parameters on output performance is studied using ANSYS (3D FEM tool). Experiments using a prototype of the proposed actuator model verified the analytical prediction and performance.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.11a
• /
• pp.737-741
• /
• 2000

Portable communication devices such as laptop computers suffer impact-induced failure in their usage. Drop/impact performance of these products is one of important concerns of product design. Because of the small size of this kind of electronics products, it is very expensive, time-consuming and difficult to conduct drop tests to directly detect the failure mechanism and identify their drop behaviors. Finite element analysis provides a vital, powerful vehicle to solve the problems. The models are created with HYPERMESH, and the analysis is carried out with LS-DYNA3D. The analysis is focused on HDD impact behavior in acceleration peak values.

• Transactions of The Korea Fluid Power Systems Society
• /
• v.3 no.4
• /
• pp.8-13
• /
• 2006

The high pressure cryogenic ball valve is used to transfer the liquefied natural gas which temperature is $-196^{\circ}C$, supplied pressure is $168kgf/cm^2$. In the present work, the temperature distribution and thermal deformation is calculated numerically. The CAR and CFD methods are useful to predict the thermal matter and the inner flow field of high pressure cryogenic ball valve. For this reason, to optimum design of the cryogenic ball valve, the theological behavior of the supplied LNG in a cryogenic valve has been studied. The governing equations are discredited and solved numerically by the finite-volume method and finite-element method. In this study, we designed the high pressure cryogenic ball valve that accomplishes zero leakage by elastic seal at normal temperature and metal seal at high temperature.

• Steel and Composite Structures
• /
• v.33 no.4
• /
• pp.473-487
• /
• 2019

A shear-deformable finite element model (FEM) with five nodes and thirteen degrees of freedom (DOFs) for free vibrations of laminated composite beams with arbitrary lay-up is presented. This model can be capable of considering the elastic couplings among the extensional, bending and torsional deformations, and the Poisson's effect. Lagrange's principle is employed in derivation of the equations of motion, and thus the element matrices are obtained. Comparisons of the present element's results with those in experiment, available literature and the 3D finite element analysis software (ANSYS(R)) are made to show its accuracy. Some further results are given as referencing for the future studies in vibrations of laminated composite beamst.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05d
• /
• pp.438-442
• /
• 1996

The design of the vacuum vessel of KT-2(a large-aspect-ratio, mid-size tokamak) is presented. The KT-2 vacuum vessel provides necessary environments to contain a plasma of double-null configuration with elongation of up to 1.8. The vacuum vessel is designed as an all-metal welded structure. Eddy currents are induced on the vessel during all stages of the plasma operation. Influences of the continuous vessel on the plasma were investigated. No significant effect of the vessel on the plasma in every aspect of null formation, plasma initiation, plasma control was found. Stresses and deformations in the vessel by atmospheric pressure and electromagnetic forces due to the eddy currents were calculated using 3D FEM code.

• Journal of Korean Port Research
• /
• v.10 no.2
• /
• pp.61-68
• /
• 1996

The main problems in structural analysis by Finite Eelement Method are difficulty in making data file and error estimation. For decreasing these problems' pays. have been suggesting the adaptive mesh refinement and error estimation method. Posteriory error estimation methods suggested by Jang[1], Babuska[2,3], Ohtsubo[8,9], and this paper. Comparing these methods and examine their properties. According this paper, In the problem supposed having singularity, the method suggested by this paper is good, But the problem supposed having no singularity, the method suggested by Jang[1] is good. For decreasing the effect of initial mesh in p-refinement, make application h-refinement at first and apply p-refinement, and confine polynomial's degree to two, for making program simply by plural mesh models are not needed.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.3
• /
• pp.130-143
• /
• 1995

This paper presents a new methodology for on-line tool breadage detection by sensor fusion of an acoustic emission (AE) sensor and a built-in force sensor. A built-in piezoelectric force sensor, instead of a tool dynamometer, was used to measure the cutting force without altering the machine tool dynamics. The sensor was inserted in the tool turret housing of an NC lathe. FEM analysis was carried out to locate the most sensitive position for the sensor. A burst of AE signal was used as a triggering signal to inspect the cutting force. A sighificant drop of cutting force was utilized to detect tool breakage. The algorithm was implemented on a DSP board for in-process tool breakage detection. Experiental works showed an excellent monitoring capability of the proposed tool breakage detection system.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.10 no.2
• /
• pp.153-166
• /
• 2008

This paper concerns the development of a knowledge-based tunnel design system within the framework of artificial neural networks (ANNs). The system is aimed at expediting a routine tunnel design works such as determination of support patterns and stability analysis of selected support patterns. A number of sub-modules for determination of support patterns and stability assessment were developed and implemented to the system. It is shown that the ANNs trained with the results of 2D and 3D numerical analyses can be generalized with a reasonable accuracy, and that the ANN based tunnel design concept is a robust tool for tunnel design optimization. The details of the system architecture and the ANNs development are discussed in this paper.